UCL to highlight warm-fill technology

By Angie DeRosa
Conference Director

Published: September 11, 2012 6:00 am ET

Related to this story

Topics Packaging

CHICAGO (Sept. 11, 8 a.m. ET) — A new closure technology being used by Coca-Cola Amatil Ltd. (CCA) of Sydney, Australia, will be the focal point of a presentation during Plastics News' Caps & Closures conference, which takes place next week in Chicago.

The warm-fill closure system technology has been developed by Krones in conjunction with CCA but the closure is an adaptation of the Sylon range developed with CCA by Universal Closures Ltd. (UCL) of Tewkesbury, England.

On Wednesday, Sept. 19, Rod Druitt, president and CEO of UCL, will deliver the presentation, “The Warm-Fill Concept: A Project with Coca-Cola Amatil Ltd.”

The technology essentially reduces the filling temperature from 85 degrees C to 75 degrees C, Druitt said in a Sept. 10 e-mail.

By reducing the filling temperature to below the glass transition temperature of PET, the packaging distortion and therefore weight/rigidity can be reduced. The further introduction of nitrogen pressurization aims to further reduce the need for vacuum handling capability in the bottle and closure.

Druitt will be among 17 expert presenters at Plastics News’ second annual Caps & Closures Conference, being held Sept. 18-19. The conference will be collocated with the 2012 Sustainability Conference of the Closure & Container Manufacturers Association, to be held on Sept. 20. Druitt also will provide an update on the successful introduction of the Sylon closures especially for carbonated soft drinks at CCA.

For a complete program and to register, visit www.plasticsnews.com/caps2012.


Comments

UCL to highlight warm-fill technology

By Angie DeRosa
Conference Director

Published: September 11, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Australia's Orora buys Texas packaging distributor Worldwide Plastics

September 2, 2014 2:54 pm ET

Australian packaging company Orora Ltd. has bought San Antonio, Texas-based plastic packaging distributor Worldwide Plastics Co.    More

Image

EcoCortec develops marine degradeable film to help reduce debris

September 2, 2014 9:55 am ET

Croatian specialist packaging producer EcoCortec has developed marine biodegradable film products designed to combat the scourge of plastics...    More

Image

Tighter resin prices leading to price hike for PE film

August 29, 2014 11:13 am ET

One of North America's largest film makers is pushing through a polyethylene price increase due, in part, to the tight resin market.    More

Image

Pregis, Sealed Air settle film-foam patent dispute out of court

August 28, 2014 1:01 pm ET

A couple of packaging companies are settling their patent fight over film-foam underlayment.    More

Image

Sonoco buys Germany's Weidenhammer, plans for thin-walled packaging growth

August 25, 2014 1:41 pm ET

Sonoco Products Co.'s acquisition of Weidenhammer Packaging Group GmbH of Germany includes plastic packaging technology that the company is targeting ...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events