Toronto's Blue Bin recycling program to accept PET clamshells

Mike Verespej

Published: September 13, 2012 6:00 am ET

Related to this story

Topics Materials, Public Policy, Suppliers, Sustainability, Packaging, Recycling, Thermoforming

TORONTO (Sept. 13, 2:05 p.m. ET) — In the aftermath of a successful pilot program, Canada’s largest city, Toronto, is adding clear PET clamshell containers and all mixed rigid plastics to its Blue Bin recycling program.

Toronto becomes the third major Canadian city — along with Ottawa and Calgary — to recycle clamshells.

The Blue Bin program in Toronto currently accepts plastic bottles, jugs, jars, tubs and lids.

Those additions to the recycling stream are expected to divert 4 million pounds of plastics from landfills annually at a net cost to the city of $78,000, according to a report submitted Sept. 12 to the city council’s Public Works and Infrastructure committee by Jim Harnum, general manager of the city’s Solid Waste Management Services department.

“Solid Waste Management plans on adding all mixed rigid plastics, including plastic clamshell containers, to the Blue Bin program in the latter part of 2012,” Harnum said in the report’s summary.

“We applaud the expansion of collection to include clear PET clamshell containers,” said Dave Cornell, technical director of the Association of Postconsumer Plastic Recyclers, whose members have more than 90 percent of the post-consumer plastic reprocessing capacity in North America.

“PET clamshell packaging is a valuable new source of raw material for PET recycling,” he said. “The announcement is a win for the city, a win for the province, and a win for the plastics recycling industry.”

What helped opened the door for PET clamshell recycling in Toronto — which has a population of 2.6 million — was the Canadian Grocers Initiative, which went into effect this past January. That voluntary industry initiative, supported by the five major grocers in Canada, mandated the use of PET thermoformed clamshell packaging for most food packaging in grocery stores.

“Until recently, the city could not recycle plastic clamshell packaging because [it was made from] multiple plastic resins, which existing sorting technology could not process to satisfy market specifications,” said the report from the Solid Waste Management Services department.

In the report, Harnum said the types of mixed rigid clamshells that Toronto residents can now recycle are clear fruit and vegetable containers, clear takeout food containers, clear molded bakery item trays, clear food storage containers, and clear egg cartons.

He said black clamshells, typically used by restaurants, should not be recycled at this point.

“We plan to use print and other applicable advertising methods to announce the addition of the new materials and reinforce the message,” starting this autumn, said Harnum in the report to the Public Works and Infrastructure Committee. But the recycling of such items can begin immediately.

A year-long pilot program conducted at the Dufferin Material Recovery Facility — which handles about half of the city’s recycling — demonstrated the feasibility of that MRF to sort rigid plastics to the specifications of plastics recyclers, said the report.

In addition, the report said Toronto has signed a seven-year recycling contract with the Canada Fibers Material Recovery Facility, now under construction, to replace three smaller processors — which have been handling the rest of the city’s recycling on a short-term basis — but who do not have the capability to sort mixed rigid plastics.

Construction of the new Canadian Fibers MRF, which will have optical sorting capabilities, is expected to be completed by May 1 when the contracts with those smaller processors expire, the report said.


Comments

Toronto's Blue Bin recycling program to accept PET clamshells

Mike Verespej

Published: September 13, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

PE prices drop for first time in two years, PP down 5 cents

November 26, 2014 10:22 am ET

North American polyethylene buyers might want to circle November 2014 in red on their calendars — since PE prices this month have fallen for...    More

Image

SPI hopes to build on EPS recycling

November 26, 2014 6:00 am ET

Successfully recycling expanded polystyrene can be a challenge, there's no doubt about that. EPS, however, has value, is in demand and deserves to be ...    More

Image

Pan-European plastics recycling show scheduled for 2015

November 26, 2014 6:00 am ET

Europe is to get its first pan-European exhibition and conference aimed at the region's plastics recycling industry next year.    More

Image

Irish packaging group Smurfit Kappa opens film plant in Spain

November 26, 2014 6:00 am ET

Global packaging group Smurfit Kappa Group plc has responded to growing demand for its bag-in-box liquid container/dispensers by opening a new plant...    More

Image

2014 US machinery shipments up 6 percent

November 25, 2014 5:17 pm ET

Through the first nine months of 2014 U.S. shipments of primary plastics equipment — for injection molding, blow molding and extrusion — g...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events