Toronto's Blue Bin recycling program to accept PET clamshells

Mike Verespej

Published: September 13, 2012 6:00 am ET

Related to this story

Topics Packaging, Sustainability, Public Policy, Materials, Thermoforming, Recycling, Suppliers

TORONTO (Sept. 13, 2:05 p.m. ET) — In the aftermath of a successful pilot program, Canada’s largest city, Toronto, is adding clear PET clamshell containers and all mixed rigid plastics to its Blue Bin recycling program.

Toronto becomes the third major Canadian city — along with Ottawa and Calgary — to recycle clamshells.

The Blue Bin program in Toronto currently accepts plastic bottles, jugs, jars, tubs and lids.

Those additions to the recycling stream are expected to divert 4 million pounds of plastics from landfills annually at a net cost to the city of $78,000, according to a report submitted Sept. 12 to the city council’s Public Works and Infrastructure committee by Jim Harnum, general manager of the city’s Solid Waste Management Services department.

“Solid Waste Management plans on adding all mixed rigid plastics, including plastic clamshell containers, to the Blue Bin program in the latter part of 2012,” Harnum said in the report’s summary.

“We applaud the expansion of collection to include clear PET clamshell containers,” said Dave Cornell, technical director of the Association of Postconsumer Plastic Recyclers, whose members have more than 90 percent of the post-consumer plastic reprocessing capacity in North America.

“PET clamshell packaging is a valuable new source of raw material for PET recycling,” he said. “The announcement is a win for the city, a win for the province, and a win for the plastics recycling industry.”

What helped opened the door for PET clamshell recycling in Toronto — which has a population of 2.6 million — was the Canadian Grocers Initiative, which went into effect this past January. That voluntary industry initiative, supported by the five major grocers in Canada, mandated the use of PET thermoformed clamshell packaging for most food packaging in grocery stores.

“Until recently, the city could not recycle plastic clamshell packaging because [it was made from] multiple plastic resins, which existing sorting technology could not process to satisfy market specifications,” said the report from the Solid Waste Management Services department.

In the report, Harnum said the types of mixed rigid clamshells that Toronto residents can now recycle are clear fruit and vegetable containers, clear takeout food containers, clear molded bakery item trays, clear food storage containers, and clear egg cartons.

He said black clamshells, typically used by restaurants, should not be recycled at this point.

“We plan to use print and other applicable advertising methods to announce the addition of the new materials and reinforce the message,” starting this autumn, said Harnum in the report to the Public Works and Infrastructure Committee. But the recycling of such items can begin immediately.

A year-long pilot program conducted at the Dufferin Material Recovery Facility — which handles about half of the city’s recycling — demonstrated the feasibility of that MRF to sort rigid plastics to the specifications of plastics recyclers, said the report.

In addition, the report said Toronto has signed a seven-year recycling contract with the Canada Fibers Material Recovery Facility, now under construction, to replace three smaller processors — which have been handling the rest of the city’s recycling on a short-term basis — but who do not have the capability to sort mixed rigid plastics.

Construction of the new Canadian Fibers MRF, which will have optical sorting capabilities, is expected to be completed by May 1 when the contracts with those smaller processors expire, the report said.


Comments

Toronto's Blue Bin recycling program to accept PET clamshells

Mike Verespej

Published: September 13, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Audacious vandal stuns Taipei Plas

September 29, 2014 4:59 pm ET

Melodrama erupted at the traditionally tranquil Taipei Plas trade show on Sept. 28 when a mysterious intruder flung red paint at the Baumüller...    More

Image

Germans, Chinese question Plastindia move to Gujarat

September 29, 2014 4:39 pm ET

Two major international partners of the Plastindia trade show have raised serious concerns about the show organizer's decision to move it to another...    More

Image

Asahi Kasei breaks ground on Alabama compounding plant

September 29, 2014 5:39 pm ET

Asahi Kasei Plastics North America will be able to solve two problems at once with a new compounding plant in Athens, Ala.    More

Image

Shini pushes into western China

September 29, 2014 4:28 pm ET

Despite intellectual-property brigands, Taiwan's Shini Plastics Technologies Inc. is zestfully pursuing the enormous Chinese market for plastics...    More

Image

Sigma's Packworx center geared at helping customers solve problems

September 29, 2014 3:41 pm ET

Sigma Stretch Film has opened a training center to help customers find the best solution to using the packaging films.    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events