PolymerOhio helps firms access simulation software

Published: September 13, 2012 6:00 am ET

Related to this story

Topics Design

AKRON, OHIO (Sept. 13, 2 p.m. ET) — Leaders of PolymerOhio Inc. want to bring computer simulation to small and midsize companies through the Polymer Portal program.

Plastics processors can rent the simulation programs on a “pay-per-use” basis through PolymerOhio, a business networking trade group in Westlake, Ohio. The goal is to provide access at an affordable price — including training for existing employees, said Richard Markham, PolymerOhio’s vice president of productivity initiatives.

Users sign up and purchase programs at www.polymerportal.org. The portal uses cloud computing — software runs through computers at the Ohio Supercomputer Center, guaranteeing superfast processing — which allows users to run the programs on their regular computers instead of investing in high-powered machines, Mark­ham said.

“You can get it by the day, by the week or by the month,” Markham said during a visit to Plastics News offices in Akron. “They need a way to use the software when they need it.”

Programs vary in price, but cost about $200 per day and about $2,500 for four weeks, making them an affordable alternative to simulation software that can cost up to $30,000, he said.

So far, Polymer Portal is offering Moldex3D mold-filling simulation for injection molding and, for compounding, Ludovic software for co-rotating, twin-screw extruders.

As of mid-September, PolymerOhio also is offering supply-chain planning software from Avercast LLC Rexburg, Idaho.

Moldex3D is from CoreTech Systems Co. of Hsinchu City, Taiwan. Ludovic is made by Sciences Computer Consultants in Saint-Étienne, France.

By predicting how a polymer will process in a given mold or die with specific processing parameters, simulation software can save considerable time and expense — before steel is cut. That can boost productivity, speed up product and process development, and help solve problems.

“It keeps you from designing things that just won’t work,” he said.

For example, Markham said, a custom molder can use mold-filling simulation to help develop a quote for a new customer and mold. The computer program can pinpoint the needed cycle time, a key variable on part quoting. A one-day software rental could be the answer.

Markham said smaller processors face barriers to getting into simulation and modeling.

“Small businesses just have not had the ability to do that. It’s just too expensive,” Markham said. “Big companies have been using simulation for decades.”

The global economy is making it more important than ever to do fast, accurate modeling, he said.

As an example, Markham said consumer products giant Procter & Gamble Co. is always developing new products and packaging, so it can justify major investments in simulation products. Small companies don’t have that economy of scale; they may only need simulation a few times a year.

Another obstacle: Who’s going to run it? Owners of small and midsize companies often worry they will have to hire new people to handle the simulation software. But PolymerOhio offers two-day courses of classroom training at the Ohio Supercomputer Center in Columbus, Ohio. Markham said PolymerOhio plans to add online training and webinars, to allow remote training of current employees.

The other partner of Polymer Portal is the Ohio Manufacturing Extension Partnership (MEP), part of the National Institute of Standards and Technology.

In the near future, PolymerOhio plans to add at least three more simulation software offerings. Future pay-per-use software will include:

• Compuplast International Inc.’s Virtual Extrusion Laboratory (VEL), which simulates a range of extrusion processes, such as sheet, blown and cast film, profiles, pipe, extrusion blow molding and die design.

• Polymer Predictor, for estimating polymer properties before the actual polymer is made.

• Structural finite element analysis for part design from Autodesk Inc.

Daniel McWilliams, Polymer­Ohio’s vice president of programs, described Ludovic simulation for co-rotating, twin-screw extruders, which have segmented screws. Ludovic takes into account all variables, such as screw speed, the material’s residence time in the screw and barrel and feeders to blend in additives, McWilliams said. The software lets a user plug in various types of screw segments and mixing blocks.

Polymer Portal currently is designed for use by Ohio plastics processors. But later this year, PolymerOhio plans to roll it out nationally, Markham said.

Staff reporter Jessica Holbrook contributed to this report.


Comments

PolymerOhio helps firms access simulation software

Published: September 13, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Plastics help designers bring home the gold

July 22, 2014 2:15 pm ET

Products with polymer content received multiple gold recognitions in the 2014 International Design Excellence Awards.    More

Image

Design group Hexagon buys Vero Software to upgrade CAM capabilities

July 22, 2014 9:51 am ET

Stockholm-based Hexagon AB, a design technology company, has announced its acquisition of Vero Software, a leader in computer aided...    More

Market Reports

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events