Report offers alternatives to extended producer responsibility

Published: September 14, 2012 6:00 am ET

Related to this story

Topics Packaging, Sustainability

PITTSBURGH (Sept. 14, 1:25 p.m. ET) — A cost analysis done for the Grocery Manufacturers Association argues that alternatives to extended producer responsibility policies can achieve high municipal solid waste recycling rates at reasonable costs and address a wider spectrum of the waste stream.

The report, released at the Sustainable Forum in Pittsburgh on Sept. 12, also claims that mandatory EPR programs aimed at food, beverage and consumer product packaging would not deliver on their promise of creating more cost-effective residential recycling programs and driving packaging redesign.

The report analyzed recycling rates, system costs, packaging changes, and other data from various European and Canadian jurisdictions that employ EPR for packaging. In the U.S., it looked at nationwide recycling rates and recycling programs in Ramsey County, Minn.

Among the study’s principal findings:

• Packaging use has declined in the United States, where there is no packaging EPR, but it has increased slowly in Europe, where there is widespread packaging EPR.

“There is no indication that EPR has reduced packaging use economy-wide or had any effect on package design or selection,” said the 68-page report, prepared for GMA by SAIC Energy, Environment & Infrastructure, LLC.

• Price signals sent by EPR to manufacturers are very weak in most jurisdictions compared to the overall value of the products they contain and price of packaging.

“Packaging EPR generally does not change the relative package cost among different package alternatives for a product,” said the report. “There is insufficient EPR fee differentiation to cause consumer packaged goods companies to switch from one package format to another.

The study also said that the U.S. has a higher recycling rate for municipal solid waste than both the European Union, 23 percent, and Canada, 18 percent, where EPR is widely employed.

It also noted that Ramsey County, a non-EPR jurisdiction in the Minneapolis-St. Paul area, has a lower net cost per ton ($156) than EPR programs in the Canadian provinces of Manitoba and Ontario, where costs are $166/ton and $202/ton, respectively. However, the report did not look at costs in any other specific municipalities in the U.S.

The report further argued that “states and municipalities already have at their disposal a suite of non-EPR policies that are both effective and efficient in terms of raising recycling rates.”

Specifically, the report cited more than a dozen approaches including disposal limits, recycling rewards or rebates for consumers, penalties, pay-as-you-throw disposal pricing, disposal bans, mandatory recycling of certain materials, diversion goals, landfill surcharges or taxes, advanced recycling/disposal fees, mandatory retail take-back programs, and building design standards.

“Together, [these initiatives] can achieve high recycling rates, without excess cost or administrative burden that results from EPR,” the report said.

“The most successful recycling and waste recovery programs will result from comprehensive approaches that leverage industry innovation and collaborative partnerships between NGO’s, government and industry, not one-size-fits-all mandates,” asserted Meghan Stasz, senior director of sustainability at GMA.


Comments

Report offers alternatives to extended producer responsibility

Published: September 14, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

DC banning PS foam containers

July 30, 2014 2:34 pm ET

Washington D.C. Mayor Vincent Gra signed into law on July 29 a bill that will ban polystyrene foam food and drink containers from the District.    More

Image

Sainsbury, Schoeller Allibert to recycle food handling crates

July 30, 2014 1:37 pm ET

British retail group Sainsbury's has contracted Dutch recycler Schoeller Allibert BV to reprocess all of its old food crates back into food-grade...    More

Image

Vinyl siding's lead slips, but industry pushing back

July 29, 2014 2:04 pm ET

Vinyl siding continues to be the top cladding choice for home builders and remodelers but fiber cement is gaining ground — at an alarming rate...    More

Image

Reynolds considering sale of Closure Systems International unit

July 29, 2014 10:32 am ET

Packaging giant Reynolds Group Holdings Ltd. has put its closures business under review.    More

Image

Acquisition expands Rieke Packaging's stake in Asia

July 28, 2014 4:39 pm ET

Diversified rigid packaging components producer Rieke Packaging Systems now has a bigger footprint in Asia.    More

Market Reports

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events