Eller: TPEs experiencing global growth

By Bill Bregar
Senior Staff Reporter

Published: September 17, 2012 6:00 am ET

Related to this story

Topics Materials Suppliers Automotive Medical
Companies & Associations

AKRON, OHIO (Sept. 17, 8:55 a.m. ET) — Thermoplastic elastomers are growing, thanks to the automotive recovery, new soft-touch packaging and as a PVC substitute in the health-care industry, according to Robert Eller, a market analyst.

Much of that growth is global — including increased use in the China, India and other developing nations.

But Eller said North America’s TPE future is bright as well. He cited the rebound in automotive, which accounts for about half of all TPE consumption, plus new applications in medical and packaging. Reshoring also is bringing some work back from China, he said.

In automotive, TPEs will gain penetration in body glazing and seals, hose and exterior body side molding.

Eller said radiator hose is one promising application, which probably will require coextrusion. He called the hose segment “enormous, but quite challenging technically.”

“That’s an area we’ve looked at for five or six years, and it looks like now it’s just beginning to take off,” Eller said at the TPE TopCon, a conference organized by the Society of Plastics Engineers, held Sept. 10-12 in Akron.

Healthcare is the fastest-growing market, as TPEs replace PVC in blood bags and tubing.

In packaging, TPEs are coming to closures and labels. One high-profile example is a Bayer aspirin bottle with a cap a TPE cover for an easy-opening grip. “The soft touch phenomenon is extending into packaging,” Eller said.

The foaming of TPEs can create a high-flow of a relatively thin coating of the soft material.

Eller outlined the global economy and material science in his presentation that kicked off the conference. He owns Robert Eller Associates LLC of Akron.

“The industry is maturing. And with the maturity goes commoditization of some of the TPE grades,” he said. One example: Thermoplastic olefin (TPO) bumper fascia and styrenic block copolymers for footware. Some major material suppliers are de-emphasizing commodity TPEs, or exiting that price-sensitive segment altogether, he said.

Specialty TPEs, on the other hand, are targeted for specific applications such as health-care grades, new acrylic grades, bio-TPEs and what Eller terms “super TPVs,” described as thermoplastic vulcanizates “based on high-performance rubbers in a sea of engineering thermoplastics.”

With resistance to high temperatures and oil, super TPVs could win automotive under-hood applications, traditionally dominated by specialty rubbers.

Eller predicted new growth areas for SBCs, using a kind of cross-inking process to improve melt strength. That will allow SBCs to be processed using blow molding, film extrusion and calendering, profile and tubing extrusion and thermoforming.

“The challenge for the styrenic block copolymers is one major fact, which is that they have a very steep melt viscosity vs. temperature curve. You have the benefit of high flow. But the implications of it is, that you have low melt strength,” he said.

Eller also spelled out a hurdle to TPE growth in some traditional rubber parts.

“This issue with rubber is that much of that compounding is done in-house by the fabricators. In other words, they’re able to control the complete supply chain, from basic raw material to fabricated part — for example, a body seal. And the rubber fabricators don’t like to give that up,” he said. “That is a major barrier to the penetration of TPEs into several marketplaces that are high-volume products.”

In the 1970s TV show Welcome Back Kotter, Vinnie Barbarino’s famous put down was “Up your nose with a rubber hose.” If they made a reunion episode today — and could convince John Travolta to play Barbarino, circa 2012, he would say: “Up your nose with a TPE hose.”


Comments

Eller: TPEs experiencing global growth

By Bill Bregar
Senior Staff Reporter

Published: September 17, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Ford moving forward in carbon fiber for 'high volume' use

April 17, 2015 10:21 am ET

Ford Motor Co. has signed a deal with a carbon-fiber manufacturer to jointly explore “high-volume” automotive uses for the lightweight...    More

Image

Force majeure declared at six European sites since mid-March

April 17, 2015 1:10 pm ET

At least six European resin makers have declared force majeure on polyethylene, polypropylene and related products since mid-March, leading to higher ...    More

Image

Executives step down from Star Thermoplastics

April 17, 2015 12:56 pm ET

Executives Randall Fortin and Larry Johnson no longer are with materials firm Star Thermoplastics Alloys & Rubbers Inc.    More

Image

Zoltek expanding CF capacity in Europe

April 17, 2015 10:12 am ET

Leading carbon fiber group Zoltek Corp. has signed a strategic agreement with the Hungarian government to expand its operation in northern Hungary,...    More

Image

Hanwha Azdel adds capacity in Lynchburg

April 16, 2015 2:01 pm ET

Composite maker Hanwha Azdel Inc. will add space and a new production line at its Lynchburg, Va., production facility, the company announced April 16.    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 15, 2015 - September 17, 2015Plastics Caps & Closures - September 2015

More Events