Eller: TPEs experiencing global growth

By Bill Bregar
Senior Staff Reporter

Published: September 17, 2012 6:00 am ET

Related to this story

Topics Materials, Suppliers, Automotive, Medical

AKRON, OHIO (Sept. 17, 8:55 a.m. ET) — Thermoplastic elastomers are growing, thanks to the automotive recovery, new soft-touch packaging and as a PVC substitute in the health-care industry, according to Robert Eller, a market analyst.

Much of that growth is global — including increased use in the China, India and other developing nations.

But Eller said North America’s TPE future is bright as well. He cited the rebound in automotive, which accounts for about half of all TPE consumption, plus new applications in medical and packaging. Reshoring also is bringing some work back from China, he said.

In automotive, TPEs will gain penetration in body glazing and seals, hose and exterior body side molding.

Eller said radiator hose is one promising application, which probably will require coextrusion. He called the hose segment “enormous, but quite challenging technically.”

“That’s an area we’ve looked at for five or six years, and it looks like now it’s just beginning to take off,” Eller said at the TPE TopCon, a conference organized by the Society of Plastics Engineers, held Sept. 10-12 in Akron.

Healthcare is the fastest-growing market, as TPEs replace PVC in blood bags and tubing.

In packaging, TPEs are coming to closures and labels. One high-profile example is a Bayer aspirin bottle with a cap a TPE cover for an easy-opening grip. “The soft touch phenomenon is extending into packaging,” Eller said.

The foaming of TPEs can create a high-flow of a relatively thin coating of the soft material.

Eller outlined the global economy and material science in his presentation that kicked off the conference. He owns Robert Eller Associates LLC of Akron.

“The industry is maturing. And with the maturity goes commoditization of some of the TPE grades,” he said. One example: Thermoplastic olefin (TPO) bumper fascia and styrenic block copolymers for footware. Some major material suppliers are de-emphasizing commodity TPEs, or exiting that price-sensitive segment altogether, he said.

Specialty TPEs, on the other hand, are targeted for specific applications such as health-care grades, new acrylic grades, bio-TPEs and what Eller terms “super TPVs,” described as thermoplastic vulcanizates “based on high-performance rubbers in a sea of engineering thermoplastics.”

With resistance to high temperatures and oil, super TPVs could win automotive under-hood applications, traditionally dominated by specialty rubbers.

Eller predicted new growth areas for SBCs, using a kind of cross-inking process to improve melt strength. That will allow SBCs to be processed using blow molding, film extrusion and calendering, profile and tubing extrusion and thermoforming.

“The challenge for the styrenic block copolymers is one major fact, which is that they have a very steep melt viscosity vs. temperature curve. You have the benefit of high flow. But the implications of it is, that you have low melt strength,” he said.

Eller also spelled out a hurdle to TPE growth in some traditional rubber parts.

“This issue with rubber is that much of that compounding is done in-house by the fabricators. In other words, they’re able to control the complete supply chain, from basic raw material to fabricated part — for example, a body seal. And the rubber fabricators don’t like to give that up,” he said. “That is a major barrier to the penetration of TPEs into several marketplaces that are high-volume products.”

In the 1970s TV show Welcome Back Kotter, Vinnie Barbarino’s famous put down was “Up your nose with a rubber hose.” If they made a reunion episode today — and could convince John Travolta to play Barbarino, circa 2012, he would say: “Up your nose with a TPE hose.”


Comments

Eller: TPEs experiencing global growth

By Bill Bregar
Senior Staff Reporter

Published: September 17, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Netstal, Electra Form team up for PET preform partnership

November 20, 2014 3:15 pm ET

The Netstal division of Krauss-Maffei Corp. is teaming up with Electra Form Industries in a partnership to offer PET preform machines and molds as a...    More

Image

High pressure RTM systems moving from Europe to Mexico

November 20, 2014 4:24 pm ET

Engel Holding GmbH's subsidiary in Mexico says it has sold the first high pressure resin transfer machine system (HP-RTM) in the Americas to a...    More

Image

Thomson Plastics opens N.C. plant

November 20, 2014 3:12 pm ET

Custom injection molder Thomson Plastics Inc. has opened a new manufacturing facility in Lexington, N.C.    More

Image

Total to buy majority stake in Polyblend

November 20, 2014 10:04 am ET

French oil and gas giant Total SA will buy a 68 percent stake in Germany's Polyblend GmbH, a subsidiary of Polymer-Chemie GmbH.    More

Image

Molder Carclo expands in China, chasing medical growth

November 19, 2014 3:44 pm ET

U.K.-based injection molder Carclo plc is “significantly” expanding its Chinese medical manufacturing capacity with a new factory, as the ...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events