In China, some see divide growing between strong, weak firms

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: September 18, 2012 6:00 am ET

Related to this story

Topics Consumer Products, Injection Molding, Molds/Tooling

HONG KONG (Sept. 18, 8:30 a.m. ET) — Growth and new investment at Hong Kong injection molder and moldmaker Ace Corp. Holdings Ltd. highlights a split in China’s plastics sector, with the stronger companies seemingly getting stronger while some weaker firms look at hard times.

Ace, which said it’s seeing more than 25 percent growth this year on top of a record 2011, claims that investments in technology like automation and plating of plastics, along with a push into new locations like a molding factory in Anhui Province, are giving it new opportunities.

Ace CEO Jack Yeung also is chairman of the Hong Kong Mold and Die Council, and he said from that position, he sees a split in South China’s plastic molding and moldmaking industry.

“We’ve seen a lot of the smaller shops who are less competitive or don’t have their niche technology, they are suffering now [and] are running at about 60 percent to 70 percent capacity,” Yeung said. “However, for the stronger companies, the bigger companies that have their core knowledge and customer base, they are all full. They are working day and night on projects.”

That trend is playing out in reports from other companies. China’s largest plastics equipment makers have all reported much tougher conditions lately, with rising wages and a slowing economy in China, along weak exports because of the euro zone crisis, taking a toll.

Hong Kong toy maker Kader Holdings Co. Ltd. said its contract manufacturing toy business saw sales down 25 percent in the first half of the year, to HK$156.7 million (US$20.2 million), with the situation leading some competitors to shut down.

“The global economy is still affected by the uncertainties related to the European sovereign debt crisis,” the company said in an Aug. 30 financial report. “Together with rising operating costs, these factors pose potential challenges to the entire toy industry. Amid the difficult operating environment, a growing number of small-scale toy manufacturers were forced to leave the market.”

Others, however, reported rising sales.

Ningbo, Zhejiang province-based auto parts maker Minth Group Ltd. said sales rose 17 percent in the first half, to HK$2.12 billion (US$273.4 million), as opportunities increased in overseas markets and investments in factories in Thailand and Mexico began to pay off.

Minth said profit rose 12 percent, with China’s domestic market showing modest growth, its Japanese customers seeing a recovery and the company landing new business with BMW.

Ace, which employs more than 2,000, said new technology has played a strong role in growth.

The company is adding its third production line for plating of plastics at its facility in Zhuhai, Guangdong province. It started that factory in 2008 and has seen demand increase quickly, Yeung said.

As well, the company acquired the assets of a Hong Kong automation firm recently, and started a unit to bring lean manufacturing into its factories and boost efficiency.

Ace is also launching production of robotic insert molding in Shanghai to automate production, and moving its injection molding of engineering plastics to inland China at a new facility in Hefei, Anhui Province, Yeung said.

He spoke in an interview at a late August news conference for the Asiamold trade show, to be held Sept. 19-21 in Guangzhou. The Hong Kong Mold and Die Council is an official supporter of the show.

He said tough financial conditions are causing customers to consolidate their supply base.

“A lot of the customers are asking for financial information before they place the order to insure [suppliers] are in a sound financial situation,” he said. “For the companies who can provide a very good report… these are the companies which the customer will be relying on. Although the economy is slow, the amount of business that is still out there is a lot.”

He said Ace’s sales are on pace this year to hit US$120 million, up more than 25 percent, and the privately held company is seeing its profit up as well: “We will have a very strong second half of the year” and it appears it will continue into 2013.

While consumer electronics markets in general are slower, companies like Samsung and Apple are strong, and the company is seeing opportunities in the car industry in the United States, Yeung said.

“We can see the Apple business is very good and the Samsung business is very good,’ he said. “Automotive in China is a little slow but automotive in the U.S. is still fairly strong. We can see there is a huge demand for molds in the American market for automotive. It depends on which sector you are in and how diverse you are.”


Comments

In China, some see divide growing between strong, weak firms

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: September 18, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Extreme Tool uses remote Michigan location to attract younger workers

September 30, 2014 3:47 pm ET

“I'm not saying there's anything wrong with being an old guy like me. But I do believe in the power of youth and reinvesting in training. The...    More

Image

Ohio molder Denbro Plastics moves to new location

September 29, 2014 6:17 pm ET

Logo products injection molder Denbro Plastics Co. has moved to another plant within Toledo, Ohio, to streamline production and improve efficiency.    More

Image

Nypro Healthcare continues to grow following Jabil acquisition

September 26, 2014 1:59 pm ET

Nypro Healthcare's newest medical device manufacturing facility offers 200,000 square feet of carefully configured Class 8 clean room molding and...    More

Image

Cascade founder believes business can be a place for real change

September 25, 2014 11:06 am ET

Companies can make a difference in a person's life, and Fred Keller, founder of Cascade Engineering Inc., believes it is important that they do.    More

Image

Deal combines two Minnesota molders

September 25, 2014 3:00 pm ET

Imperial Plastics Inc. has extended its injection press tonnage with the acquisition of another Minnesota custom molder.    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events