OSHA fines Formosa Plastics — again

By Frank Esposito
Senior Staff Reporter

Published: September 20, 2012 6:00 am ET

Related to this story

Topics Public Policy, Materials, Suppliers

DELAWARE CITY, DEL. (Sept. 20, 2:30 p.m. ET) — For the second time in three years, Formosa Plastics Corp. USA has been fined for alleged safety and health hazards at its dispersion PVC resin plant in Delaware City.

On Sept. 19, the Occupational Safety and Health Administration announced $148,700 in proposed penalties for 16 alleged violations at the site, which employs about 100. Two of the violations are repeat offenses that also were cited in a separate investigation in early 2010.

Those repeat violations involve alleged failure to perform process equipment inspections and tests, failure to inspect critical valves and failure to ensure that PVC dust did not accumulate on surfaces and on the floor of a bagging area.

The other violations include alleged electrical hazards, lack of machine guarding, incomplete emergency shutdown procedures and other claims, all of which are classified as serious violations by OSHA.

“This employer continues to disregard OSHA’s process safety management standard and put its workers at risk of injury and possible death,” Domenick Salvatore, office director for the Wilmington, Del., area, said in a news release.

Officials with Livingston, N.J.-based Formosa “are currently reviewing” the OSHA report, spokesman Steve Rice said by phone Sept. 20. The firm has until Sept. 28 to respond to the citations.

The 2010 OSHA investigation produced 27 alleged serious violations — including a claim of unguarded floor holes and walkways — and a fine of $133,500. That investigation was begun after OSHA received a complaint from an employee at the site.

In late 2009, Formosa paid a civil penalty of almost $3 million to resolve several alleged environmental violations at its plastics and chemicals plants in Point Comfort, Texas, and Baton Rouge, La. At that time, the firm also agreed to spend more than $10 million on pollution controls at those sites.


Comments

OSHA fines Formosa Plastics — again

By Frank Esposito
Senior Staff Reporter

Published: September 20, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Netstal, Electra Form team up for PET preform partnership

November 20, 2014 3:15 pm ET

The Netstal division of Krauss-Maffei Corp. is teaming up with Electra Form Industries in a partnership to offer PET preform machines and molds as a...    More

Image

High pressure RTM systems moving from Europe to Mexico

November 20, 2014 4:24 pm ET

Engel Holding GmbH's subsidiary in Mexico says it has sold the first high pressure resin transfer machine system (HP-RTM) in the Americas to a...    More

Image

New York City officials avoid taking a stand on plastic bag fee

November 20, 2014 11:28 am ET

New York Mayor Bill de Blasio's administration claimed Nov. 19 to be committed to dramatically reducing plastic bag consumption in New York City, but ...    More

Image

Agilyx facing nearly $50,000 in fines from Oregon DEQ

November 20, 2014 11:59 am ET

Agilyx Corp., a plastic waste-to-oil company, is facing nearly $50,000 in fines for alleged hazardous waste violations at its Tigard, Ore., research...    More

Image

Environmental group focusing on producer responsibility in packaging

November 20, 2014 11:04 am ET

Athens, Ga.-based environmental group Upstream is out with a new paper entitled “Advancing Local Government's Interests through Extended Produce...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events