Plasan finds carbon-fiber niche

By Rhoda Miel
News Editor

Published: September 21, 2012 6:00 am ET

The 2013 SRT Viper boasts Plasan’s carbon-fiber, low-weight body panels. (Chrysler Group LLC photo)

Related to this story

Topics Materials, Suppliers, Automotive

WIXOM, MICH. (Sept. 21, 3:30 p.m. ET)  — Plasan Carbon Composites’ current generation of automotive carbon fiber is out on the road now — 65 pounds’ worth of low-weight, high-speed body panels on the 2013 SRT Viper.

Plasan is getting ready for the next generation, investing $18 million on a plant in Walker, Mich., where five new presses are set to make parts starting in 2013 and boasting a 17-minute cycle time.

Beyond that, future generations of production capacity are under development at Plasan’s technology center in the Detroit suburb of Wixom, with tests on new resin chemistry and refining additional production techniques.

“Across the car companies, everybody’s got something they want to try out,” said President Jim Staargaard during a Sept. 17 interview at Plasan’s technology center.

Carbon-fiber composites have long been a holy grail for automakers that want to reduce weight and gain performance. The high production costs confined carbon fiber’s use to “supercars” for years until it began appearing in more mainstream, niche vehicles in 2004, such as General Motors Co.’s Corvette and the Viper.

___________________

   NOTE: Plasan President Jim Staargaard will speak about "Investing in carbon fiber for near-term production" at the Nov. 6-7 Plastics in Lightweight Vehicles 2012 conference in Livonia, Mich. (www.plasticsnews.com/plv2012).

___________________

For the new Viper, Plasan is using traditional autoclave manufacturing to mold the hood, roof and trunk lid. The roof itself is a breakthrough for the company, with an all-composite structure. The carbon fiber even stands up to federal safety rollover requirements without additional steel support.

Chrysler expects to sell 2,000 to 3,000 Vipers per year, which takes up a full production line at Plasan’s manufacturing site in Bennington, Vt. — six days a week, three shifts per day, Staargaard said.

Both the cost of the raw materials and the time required to make parts using autoclave has been a major hurdle for carbon-fiber composites to move forward in the auto industry. Multiple companies have been looking at a variety of approaches to solve the money and production problems.

German automaker BMW AG has garnered the most attention and taken the biggest approach, creating joint ventures to secure just the right grade of carbon-fiber raw materials in addition to developing in-house proprietary processing.

Its joint venture with SGL Carbon SE in Moses Lake, Wash., is even placed tactically to tap into a less-expensive source of energy from the local hydroelectric grid to reduce its costs, noted Nippani Rao, a 20-year veteran of the auto industry. Rao is now president of Rao Associates, a Farmington Hills, Mich.-based consulting company.

To make carbon-fiber really competitive for space on mainstream cars, it needs to drastically reduce overall part prices, Rao said. A $5,000 carbon-fiber hood makes sense for a handful of low-volume, niche vehicles, but to find a home even on a $50,000 luxury sedan, that hood has to come in at a cost closer to $1,000.

Plasan is tackling the costs first through improved processing, then expanding into further improvements in the resin.

Current molding techniques, first developed for the aerospace industry, have a 92-minute cycle time, Staargaard said.

Plasan’s engineering manager Gary Lownsdale worked at cracking the production hurdles by essentially “reverse engineering” the autoclave process. For more than three years, Staargaard said, Lownsdale ran parts through the autoclave, stopping production every minute to pull out samples and determine exactly what was happening in the process — the temperatures, the pressures and what was needed to make a perfect part.

Lownsdale and his team then looked for the best way to replicate that process at a far faster cycle time.

They came up with a proprietary process that uses a compression press system originally developed for the wood composite industry, which must combine multiple layers of wood and adhesives, Staargaard said.

The company contracted with Globe Machine Manufacturing Co. of Tacoma, Wash., whose membrane presses were already in use for carbon-fiber-composite turbine blades for the wind-energy industry.

An initial small press went into place in Wixom for testing, and a full-scale press is there now, capable of turning out finished parts within 17 minutes.

That press and those parts were a vital part of proving Lownsdale’s and Plasan’s concept to scale up for full auto production.

“It’s much easier to get customers and the supply base to believe you when you’ve got something out there,” Staargaard said.

The new plant is a second key sign that carbon-fiber composites for the North American auto base are ready to become reality beyond niche vehicles.

While Plasan is careful not to talk about specifics, the very fact that it is spending $18 million and installing five presses in Walker is a good sign that there is a real business opportunity. Staargaard said more details on the company’s future projects will be announced during the next six to nine months.

Plasan’s parts will be shipped with a primer coat, ready to attach to the car body to be painted alongside other panels.

At the same time, Plasan is looking to build production in other processes, such as resin transfer molding using chopped fiberglass. The auto industry is looking to RTM to use carbon fiber as a replacement for steel in structural beams and other components.

“Up until now, we were limited by the autoclave,” Staargaard said. “Now we’re limited by the chemistry, but that’s going to change.”


Comments

Plasan finds carbon-fiber niche

By Rhoda Miel
News Editor

Published: September 21, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Formosa to be compensated for Vietnam riot

July 28, 2014 1:44 pm ET

Taiwan's Formosa Plastics Group will receive $2.39 million from the Vietnamese government and insurance companies for damages suffered during the...    More

Magna hiring at two Michigan locations

July 28, 2014 11:43 am ET

Magna Interior Trim Components is adding a total of 169 jobs to two of its Michigan manufacturing facilities.    More

Image

Ukraine's Group DF may be forced to sell Crimea-based additives plant

July 28, 2014 10:12 am ET

Group DF, the industrial business of Ukrainian tycoon Dmitry Firtash, may be forced to sell off Eastern Europe's biggest producer of titanium oxide,...    More

Image

Gear pump maker Witte expands in Germany and USA

July 25, 2014 2:15 pm ET

Witte Pumps & Technology GmbH, the German maker of gear pumps for extrusion, has moved into a new headquarters factory in the Hamburg area, and the...    More

Image

Austrian mold maker seeking North American manufacturing partner

July 25, 2014 1:49 pm ET

An Austrian mold maker is looking for a manufacturing location in North America.    More

Market Reports

Plastics Recyclers Data Report & Directory

This exclusive MS Excel database contains all the companies from Plastics News' ranking of top North American Recyclers and Brokers by reprocessed volume and also includes a directory with materials processes, services offered and company contact information. Data is based on primary research by PN editorial staff.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events