Chinese group voices concerns with draft recycling policy

By Nina Ying Sun
Assistant Managing Editor

Published: September 25, 2012 6:00 am ET

Related to this story

Topics Public Policy, Sustainability, Recycling

BEIJING (Sept. 25, 4:35 p.m. ET) — China’s Ministry of Environmental Protection is drafting another policy that could have direct impact on the global market for recycled plastics.

The China Plastics Processing Industry Association’s Plastics Recycling Committee — a group that represents recyclers in China — has sent an official response to the ministry summarizing two main points in opposition to the new draft regulations on imported plastic waste.

The key point in the official letter, which PRC-CPPIA shared with Plastics News, said a regulation that lists import of unwashed post-consumer plastics as an illegal activity “lacks rationality.”

From a technical point of view, post-consumer plastics need to go through sorting, washing and grinding, which should take place in the same stage. Imported waste plastics that are prewashed frequently have a mix of materials, which affects the quality.

The letter added that some types of waste plastics are difficult to dry after washing and will retain 25 percent of water, inflating the import cost. Water could also cause quality issues for engineering plastics such as nylon.

“If [the government] bans the import of unwashed plastics, it in fact will hurt the operation of many waste importers and recyclers with the exception of PET bottle flakes” the letter said.

Second, the letter argues that it is unreasonable to require recyclers to granulate materials before they are sold. The purpose of granulation is to facilitate uniform feeding of the materials. If regrind meets the feeding standards, it is wasteful to go through an additional procedure of granulation.

For example, the group said, clean PET flake is used to make polyester fiber, without having to be granulated first.

“We believe the current regulatory and control measures of waste plastics import are very strict. The double-check mechanism of offshore inspection and arrival inspection at the customs effectively prevents the import of banned materials and pollution. Most importers and recyclers are law-abiding operations. [If the government] elevates the control measures simply because of individual cases of management oversight or malicious behavior, [it] could limit the normal operation of law-abiding businesses and will not be conducive to the healthy growth of the industry,” the statement concluded.

The ministry’s draft policy stipulates the criteria for receiving import licenses and details on facility inspections.

Companies that are eligible to apply for the import and processing of waste plastics include:

• Polyester fiber manufacturers.

• Processors of plastics products and other manufacturers that use waste plastics in the raw materials.

• Companies that make granulated materials from waste plastics.

• Companies that make recycled PET flake with existing annual capacity of no less than 30,000 metric tons can apply to import recycled PET grinds and industrial scrap.

Ineligible companies include firms that make ultrathin shipping bags, food-contact products, medical products and construction supplies (with the exception of decorative products).


Comments

Chinese group voices concerns with draft recycling policy

By Nina Ying Sun
Assistant Managing Editor

Published: September 25, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

California lawmakers give final approval to plastic bag ban

August 30, 2014 6:00 am ET

Under the measure, single-use plastic bags will be barred from California retailers, including grocery stores, convenience stores and drug stores, as ...    More

Image

Poor plastic coating prompts cable recall

August 29, 2014 2:10 pm ET

Australia's competition regulator, the Australian Competition and Consumer Commission (ACCC), has ordered a major recall of 2,485 miles of electrical ...    More

Image

EPA fines RI polymer company

August 29, 2014 1:20 pm ET

A Rhode Island polymer manufacturer has reached a $60,000 settlement with the U.S. Environmental Protection Agency (EPA) for violating federal clean...    More

Image

Green trend boosts plastic building materials business in China

August 29, 2014 9:42 am ET

The greening of China's domestic building materials market is giving the plastics industry a boost.    More

California Assembly passes plastic bag ban

August 28, 2014 3:07 pm ET

In its second attempt of the week, the California Assembly approved a bill that would ban single-use plastic bags statewide, the first such ban in the...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events