Expanding recycling will require a local approach

Mike Verespej

Published: September 27, 2012 6:00 am ET

Related to this story

Topics Packaging, Sustainability, Public Policy, Recycling

AUSTIN, TEXAS (Sept. 27, 11:50 a.m. ET) — Future increases in recycling materials will come from local and state initiatives, possibly in the form of extended producer responsibility (EPR) initiatives — and not from nationwide endeavors.

And for recycling to grow by leaps and bounds, the different groups involved in recycling will need to cooperate more and look at recycling in a different light.

“The next 15 percentage point increase in recycling will come less from national initiatives, and more from local and state endeavors,” said Matt McKenna, president and CEO of Keep America Beautiful. “Policy at the federal level has receded as a driver of recycling. But there will be increasing pressure at the state and local level for EPR for specific products.”

“Voluntary or mandated EPR will be on the agenda in several states for years to come because global demand for products won’t change and the participation rates for recycling are not what they should be,” McKenna said at the recent Resource Recycling conference in Austin.

McKenna said KAB will kick off its second national public service campaign to build awareness of the need to recycle in the second or third quarter of 2013.

To increase the amount of people that recycle materials and to increase the amount of materials recycled, it is also critical that all groups interested in advancing recycling cooperate.

“There are a lot of groups that have the common goal of reducing waste and increasing recycling rates,” McKenna said. “We must learn not only to talk to each other, but to talk to people with different viewpoints. We have to build that bridge to increase the recycling rate in America today.”

Mark Lichtenstein, president of the National Recycling Coalition, agreed.

“We are all trying to figure out a different way to do environmental sustainability in this country,” Lichtenstein said. “We have to look at unique financial mechanisms, public-private partnerships and how non-government organizations play a role in this.”

In addition, he said, industry, government, associations and NGOs “have to learn what we need to do differently to educate people.”

“Our approaches to education are not working as effectively as they should,” Lichtenstein said. “We need to find out what we need to do differently to affect consumer behavior.”

But increasing recycling is more than just a matter of greater cooperation and better education, said David Allaway, senior policy analyst in the solid waste program of the Oregon Department of Environmental Quality

Achieving more recycling and motivating more consumers to recycle will require that individuals involved in recycling look at sustainable material management in a new way.

“If we’re going to get deep reductions in environmental impact, we have to have strategies that go beyond recycling,” Allaway said. “We have to understand recycling is a means to an end, not an end in itself.

“And we need to understand that the economic and environmental value of recycling is upstream,” he said. “It is providing industry with feedstocks to replace virgin material and reducing energy use. If we can’t do that, we’re a failure.”

To achieve that, Allaway said everyone involved in recycling needs to understand that “we have to do more than manage the discards. We need to understand under what conditions does recycling serve as a cul-de-sac and under what conditions does it move us forward on the road to sustainability.”

He said there is a need to come up with strategies that can alleviate the environmental impact of materials.

“We are never going to be doing sustainability management properly if we continue to organize around landfill avoidance. We have to stop promoting recycling as landfill avoidance,” Allaway said.

“We have to look at the full impact of materials and every unit of energy used across the entire life cycle to determine actions that can be taken across the entire process,” said Allaway.

“We need to focus on the market side, not the collection,” he added. “If we reorganize recycling around that, we wouldn’t have this problem around recycling.”

“We need more recycling,” said Allaway. “But more importantly, we need better recycling. We need recycling to embrace more than it has in the past. We need it to embrace reuse, prevention, sustainable sourcing and sustainable consumption.”


Comments

Expanding recycling will require a local approach

Mike Verespej

Published: September 27, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Brown signs California's plastic bag ban into law

September 30, 2014 1:38 pm ET

Gov. Jerry Brown (D) made it official today: plastic bags are banned across the entire state of California.    More

Image

Teens put a cap on watery ketchup

September 30, 2014 1:57 pm ET

Whether you spell it ketchup or catsup, use it on burgers or fries, or prefer Heinz or Hunt's, there is one universal problem for the ages: That...    More

Image

Toyoda Gosei pleads guilty, agrees to $26 million fine for price fixing

September 30, 2014 11:27 am ET

Toyoda Gosei Co. Ltd. has pleaded guilty and agreed to pay a $26 million fine for its alleged role in an international conspiracy to rig bids and fix ...    More

Image

Amcor planning more growth in Asia

September 30, 2014 10:24 am ET

Flexible packaging firm Amcor Ltd. is rapidly expanding its presence in the Asian market. The company's top official in the region said it will soon...    More

Image

Uflex to build large flexible packaging plant in western India

September 30, 2014 10:01 am ET

Flexible packaging company Uflex Ltd. is planning a major new plant in the western Indian state of Gujarat.    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events