SPE thermoformers tag winners

By Bill Bregar
Senior Staff Reporter

Published: September 28, 2012 6:00 am ET

Related to this story

Topics Consumer Products, Thermoforming

A large house for raising dairy calves netted silver for Hampel Corp. of Germantown, Wis.

Hampel has sold more than 400,000 of the calf houses worldwide, since it introduced the proprietary product line in 1981. Those shelters provide an optimal environment for the growth of nearly 2 million calves a year.

The part requires a 67-inch draw depth. It measures 98.5 inches long by 60.5 inches wide by 57 inches tall — formed from a single sheet of high-molecular-weight polyethylene. The raw sheet is 0.375 inch thick; the finished material, 0.1- to 0.2-inch thick.

Because the part was so big, and so it could run on existing thermoforming machines, Hampel designed a draw box, in which the pneumatic doors close to create pre-draw and then open back up to aid the cooling process.

The shelter contains an undercut that was designed to release itself from the tool, without the need for a core pull.

Hampel officials said this is the only brand of calf housing on the market made by the thermoforming process.

Pressure forming:

Molded Plastic Industries Inc. of Holt, Mich., took silver for its compressed natural gas tank for a pickup truck, featuring molded-in features.

Molded Plastic forms the heavy-duty part from Mytex Polymers’ coextruded MetaForm engineered material. Designers had considered fiber-reinforced plastic and metal, but neither material offered the flexibility of design for the styling required.

The customer is Westport Light Duty Inc. of Plymouth, Wis.

Castek Aluminum Inc. of Elyria, Ohio, build the forming tools, on a lead time of less than eight weeks.

On the show floor in Grand Rapids, the natural gas tank sat in the bed of a Ford F-250 Super Duty XLT pickup. Molded Plastic officials said the tank meets Ford Motor Co.’s tests for durability, load tests and tests to measure drop impact of a shovel, pitchfork, sledge hammer or 2-by-4 board.

Judges Award

 The Judges Award went to vacuum former Craft Originators Inc. of Hamilton, Ontario, and molder Tasus Corp. of Bloomington, Ind., for an automotive audio speaker grill. The film for thermoforming is a Sabic high-gloss piano-black polycarbonate that meets Chrysler Group LLC’s DX9 specification.

Stabilization of the material was achieved with an extended pre-bake phase, and vacuum forming was performed under strict mold, material and air temperature controls.

Precision formed and trimmed parts were inserted into the grill mold and backshot with PC/ABS.


Comments

SPE thermoformers tag winners

By Bill Bregar
Senior Staff Reporter

Published: September 28, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Unilever puts Dove brand on a MuCell diet

April 23, 2014 1:57 pm ET

New technology employed by Unilever NV in the manufacture of bottles for its Dove Body Wash range of products could end up saving the brand owner up...    More

Aston Martin learned what we've known about complex supply chain

April 23, 2014 1:32 pm ET

The story of the United States' trade deficit with China (over $318 billion in 2013) is one that most of us are familiar with. Cheaper labor costs...    More

Image

Coffee roaster looks to improve footprint of single cup systems

April 22, 2014 1:30 pm ET

One of the largest coffee and tea manufacturers in North America has introduced a single-serve beverage capsule intended to curb the waste created by ...    More

Image

Inventor taps into TV exposure, crowd funding for water bottle project

April 21, 2014 3:26 pm ET

An Australian inventor has developed a reusable plastic water bottle with a filter in a bid to get more people to drink tap water instead of buying...    More

Image

'Thermoforming has nearly limitless possibilities'

April 18, 2014 12:54 pm ET

Julie McAlindon of PolyOne Corp. speaks about the future of thermoforming and the integration of Spartech Corp.    More

Market Reports

Market Data Book - Rankings & Lists

A one-stop download of Plastic News' exclusive annual lists and processor rankings containing essential data including sales, employees, end markets, materials and more.
EXCLUSIVE EXCEL FEATURE: full mailing address details for available plant locations.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Mold Making and Tooling Review and Outlook 2014 North America

This report provides in-depth analysis of the mold and toolmaking market for North America, including discussions of trends, opportunities, threats, the latest developments in production and labor and equipment trends impacting moldmakers.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events