SPE CEO talks plastics sustainability

By Bill Bregar
Senior Staff Reporter

Published: October 1, 2012 6:00 am ET

Related to this story

Topics Packaging, Sustainability, Thermoforming

GRAND RAPIDS, MICH. (Oct. 1, 1:30 p.m. ET) — Willem De Vos is CEO of the Society of Plastics Engineers. He’s also a thermoforming guy. De Vos wore both hats in a keynote speech about sustainability, kicking off the SPE Thermoforming Conference.

“Plastics is really the most sustainable solution for all of us,” he said.

De Vos noted that this was his second speech at annual SPE event. At the 2010 conference, he talked about globalization as CEO of Vitalo Group, the Belgium-based thermoformer. He became the new CEO of SPE in January of this year.

De Vos said only plastics accounts for only 4 percent of the total oil consumption, but plays a major “green” role by cutting transportation costs through packaging that is much lighter than paper, glass and steel. Plastic packaging—including thermoformed items—makes food last longer and is ideal for ready-to-east foods and single-serving sizes, he said. Plastic is used in irrigation pipes and solar panels.

He showed a slide of a thin-wall thermoformed cushioning package for a Dell computer, which has less volume that standard cardboard. That means more computers can be shipped on each truck.

Light weight is a major attribute of plastics, and De Vos is bullish on the automotive market, which needs to dramatically increase mileage standards.

“The all-plastic car. It’s one of my visions, and it’s sure that this is not as dream. It will be the reality tomorrow: Plastic chassis, plastic engines, full plastic transmissions, plastic exhaust,” he said. “You might say we are far away from that. I don’t think so. I’m sure that in the coming decades we will have a car that is completely made out of plastic.”

De Vos gave some other examples, such as composite wind turbines and self-healing bandages made with polymers.

Before his speech, he thanked Thermoforming Division leaders for having the Grand Rapids convention center named after him: DeVos Place.


Comments

SPE CEO talks plastics sustainability

By Bill Bregar
Senior Staff Reporter

Published: October 1, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Berry's rebranded Blue Clover expands packaging design reach

January 23, 2015 1:59 pm ET

As design director of Berry Plastics Corp.'s rebranded packaging design studio, Scott Fisher believes the new name of Blue Clover Studios cuts the...    More

Image

Mexico's Polymer Solutions looks to grow, expand offerings with name change

January 23, 2015 12:03 pm ET

British biodegradable additives developer Symphony Environmental Technologies plc's Mexico distributor has changed its name from Plásticos...    More

Image

Esterform buys Constar UK, doubles PET preform capacity

January 23, 2015 10:07 am ET

Constar UK, once part of global packaging firm Constar International Holdings LLC, has a new owner.    More

Image

Recycling Partnership coalition kicks off its initial curbside project

January 22, 2015 3:51 pm ET

The Recycling Partnership's inaugural effort to boost curbside recycling around the country kicked off this week in Columbia, S.C.    More

Image

ACC's 'Roadmap' gaining traction

January 22, 2015 1:56 pm ET

Nearly a year into the launch of the latest effort to promote greater use of plastics in automotive applications, a trade group behind the push says t...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events