Singapore molder Forefront Medical adding China plant

By Steve Toloken
News Editor / International

Published: October 2, 2012 6:00 am ET

Related to this story

Topics Medical Injection Molding
Companies & Associations

SHANGHAI (Oct. 2, 8 a.m. ET) — Seeing growing interest from global medical device companies in manufacturing in China, Singaporean firm Forefront Medical Technology is investing S$10 million (51.3 million Chinese yuan) in a plastics molding and extrusion facility in East China to tap into market.

The facility, in Changzhou, Jiangsu province, would include more than 30 injection presses, six extrusion lines and 200 employees when fully built out in about 18 months, company officials said in an interview at the recent Medtec China 2012 show.

“Increasingly our customers are telling us that they are kind of focused on the domestic China market, and in doing so, they would definitely need to work with partners like us with facilities that are closer their plant,” said J.S. Chong, vice president of business development.

The Changzhou factory will open in October with eight molding presses and about 40 employees, and is the company’s second in China. A facility in Xiamen, Fujian province, is focused almost exclusively on direct exporting, Chong said in an interview at Medtec, held Sept. 26-27 in Shanghai.

With the Xiamen plant and another at its headquarters in Singapore, the company has 800 employees and about 40 injection molding machines.

The firm focuses on components and complete device manufacturing for surgical, diagnostic and drug delivery products.

Niew Ker Ran, the company’s business development manager, said the area around Shanghai and Suzhou is home to manufacturing and procurement offices for many of the world’s largest pharmaceutical and medical device manufacturers.

Its customers are interested in both manufacturing for the local Chinese market and in using China as an export base, said Niew.

While salaries and other costs in China are rising, Chong argues that these are trends that have not hit as hard in the medical manufacturing industry.

“If compare today to a mere five years ago, costs are definitely increasingly,” he said. “If you talk about the cost of doing business here versus the cost of doing business in [North America or Europe], the cost here is still much less.”

The company has a medical device contract manufacturing license from the U.S. Food and Drug Administration and a Class 2 medical device manufacturing license from the Chinese government.

Forefront is a unit of VicPlas International Ltd., a publicly-traded company on Singapore’s stock exchange that also has a unit that manufactures plastic building products including uPVC pipe, fittings and conduits. Those sales are mostly in Singapore, Malaysia and Bangladesh, the company said.

In the fiscal year ending July 31, 2011, the last for which figures are available, VicPlas said revenues in the Forefront medical unit grew 35 percent to S$50.4 million.

Forefront accounted for 69 percent of VicPlas total revenues, with VicPlas reporting a profit of S$1.4 million (7.2 million Chinese yuan). It did not break out income for the two units.

It said its largest customer in its medical business, the Laryngeal Mask Company (Singapore) Pte. Ltd., accounted for S$44.30 million in revenue.

The company said it also saw increased business from the transfer of production lines of nasogastric and jejunostomy catheter tubes from a U.S. company and the integration of hydrophilic and antifogging coating technologies into its products.


Comments

Singapore molder Forefront Medical adding China plant

By Steve Toloken
News Editor / International

Published: October 2, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

TE buys catheter maker AdvancedCath

April 10, 2015 2:45 pm ET

Catheter system design and manufacturing firm AdvancedCath Technologies Inc. has been acquired by TE Connectivity's medical division in a $190...    More

Image

Rubber molder digging up more business with addition of injection molding

April 10, 2015 9:20 am ET

Jefferson Rubber Works Inc. got a taste of the plastics industry in 2014 and sees bigger things on the horizon.    More

Image

From yo-yos to DNA, Canon shows range

April 6, 2015 11:16 am ET

You might wonder what Canon, known primarily for its consumer cameras and copier products, was doing molding red yo-yos at NPE 2015.    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 15, 2015 - September 17, 2015Plastics Caps & Closures - September 2015

More Events