Carbon fiber a hit in Paris

By Rhoda Miel
News Editor

Published: October 4, 2012 6:00 am ET

Light-weight carbon fiber is used extensively in the SLS AMG Coupé, helping the electric-drive car reach speeds of 155 mph. (Daimler AG photo)

Related to this story

Topics Automotive, Sustainability, Materials, Suppliers

PARIS (Oct. 4, 3:20 p.m. ET) — New uses for plastics are hitting the road in Europe, from high-end sports cars to the family van.

At the press preview for the Paris Motor Show — officially the Mondial de l’Automobile — Daimler AG rolled out its all-electric Mercedes SLS AMG Coupé Electric Drive, which boasts extensive use of carbon fiber to help it offer up speeds of up to 155 mph, and a 155-mile range on its lithium-ion batteries.

The production car was shown alongside two other vehicle concepts — the B-Class Electric Drive sedan and a natural gas-driven version of the B-Class — and the electric-drive Smart Brabus.

The Mercedes builds on the Stuttgart, Germany-based auto­maker’s E-Cell design for electric vehicles, which creates a carbon-fiber “spine” that runs along the floor of the car and holds the battery pack. The carbon fiber is both light and strong enough to protect the batteries during a crash.

Daimler first showed the carbon-fiber-spine concepts in 2011, saying the composite is 50 percent lighter than a comparable steel package and 30 percent lighter than aluminum.

The AMG electric car will have 12 battery modules, each with 72 individual lithium-ion cells for a total of 865 cells. Both the cells and the liquid-cooling system for the battery use plastics extensively in frames, connectors, ducts and other components.

The batteries power four individual electric motors in an all-wheel-drive system.

The sports car also boasts carbon fiber throughout its body. A front splitter is designed to create a downforce on the front axle to improve performance. The front mirrors and the engine cover are also produced with carbon fiber.

A far-less-expensive electric car, the Neoma EV, is set to go on the road from French automaker Lumeneo using lithium-ion batteries supplied by Midland, Mich.-based Dow Kokam.

The compact car is less than 10 feet long and has a range of up to 87 miles with the battery system. It can hit speeds up to 68 miles per hour, but is targeted at urban drivers.

Production has already begun, meanwhile, on a new car for the European market. Rather than power and speed, Ford Motor Co. boasts convenience and an easier way to get the kids in the car with its B-Max.

Dearborn, Mich.-based Ford created the small minivan without a traditional B-pillar — the vertical structural support between the first and second row of seats.

Removing the pillar and replacing the traditional rear door with a sliding door allows van users to get into the rear seats more easily. That makes it easier to get children into car seats or large packages in and out of the vehicle. But removing the B-pillar also eliminated the traditional location for front-row seat belts.

Seat supplier Johnson Controls Inc. had to design a front seat that integrated the seat-belt mechanism and developed all-new production at new sites in Romania, near Ford’s assembly plant in Craiova.

JCI, with auto­mo­tive operations based in Plymouth, Mich., and European offices in Bur­scheid, Germany, hired 185 people for the seat-assembly plant in Craiova. It also bought Romania’s Spumotim SA in late 2011, adding its urethane foam facility in Timisoara to produce seat pads for the B-Max seats.

Carbon fiber technologies will be a featured at the Plastics in Lightweight Vehicles 2012 conference, Nov. 6-7 in Livonia, Mich. For information see www.plasticsnews.com/plv2012.


Comments

Carbon fiber a hit in Paris

By Rhoda Miel
News Editor

Published: October 4, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

DuPont-Chenguang JV to produce fluoroelastomers in China

January 29, 2015 12:30 pm ET

DuPont Fluoropolymer Solutions and Zhonghao Chenguang Chemical Research Institute Co. Ltd. are proceeding with a 50-50 joint venture to serve the...    More

Image

Plastics News Now: Losing weight with style, plastics in the Dragons' Den

January 29, 2015 6:00 am ET

A 19-year-old entrepreneur brings business to a U.K. injection molder after winning support on TV's Dragons' Den, auto suppliers combine...    More

Image

Barington may force a vote for Omnova board at annual meeting

January 28, 2015 3:52 pm ET

It looks like the battle between Omnova Solutions and an activist investor is heading to a vote.    More

Image

PolyOne sees sales, earnings per share climb, profit decline

January 28, 2015 3:00 pm ET

North American compounding leader PolyOne Corp. posted record adjusted earnings per share in 2014, even as the firm's sales saw modest growth and its ...    More

Image

China XD to catch up on Sichuan project

January 28, 2015 2:41 pm ET

Automotive compounder China XD Plastics Co. Ltd. (Nasdaq: CXDC) has been working on its fourth production base in Nanchong, Sichuan province since 201...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events