Carbon fiber a hit in Paris

By Rhoda Miel
News Editor

Published: October 4, 2012 6:00 am ET

Light-weight carbon fiber is used extensively in the SLS AMG Coupé, helping the electric-drive car reach speeds of 155 mph. (Daimler AG photo)

Related to this story

Topics Automotive, Sustainability, Materials, Suppliers

PARIS (Oct. 4, 3:20 p.m. ET) — New uses for plastics are hitting the road in Europe, from high-end sports cars to the family van.

At the press preview for the Paris Motor Show — officially the Mondial de l’Automobile — Daimler AG rolled out its all-electric Mercedes SLS AMG Coupé Electric Drive, which boasts extensive use of carbon fiber to help it offer up speeds of up to 155 mph, and a 155-mile range on its lithium-ion batteries.

The production car was shown alongside two other vehicle concepts — the B-Class Electric Drive sedan and a natural gas-driven version of the B-Class — and the electric-drive Smart Brabus.

The Mercedes builds on the Stuttgart, Germany-based auto­maker’s E-Cell design for electric vehicles, which creates a carbon-fiber “spine” that runs along the floor of the car and holds the battery pack. The carbon fiber is both light and strong enough to protect the batteries during a crash.

Daimler first showed the carbon-fiber-spine concepts in 2011, saying the composite is 50 percent lighter than a comparable steel package and 30 percent lighter than aluminum.

The AMG electric car will have 12 battery modules, each with 72 individual lithium-ion cells for a total of 865 cells. Both the cells and the liquid-cooling system for the battery use plastics extensively in frames, connectors, ducts and other components.

The batteries power four individual electric motors in an all-wheel-drive system.

The sports car also boasts carbon fiber throughout its body. A front splitter is designed to create a downforce on the front axle to improve performance. The front mirrors and the engine cover are also produced with carbon fiber.

A far-less-expensive electric car, the Neoma EV, is set to go on the road from French automaker Lumeneo using lithium-ion batteries supplied by Midland, Mich.-based Dow Kokam.

The compact car is less than 10 feet long and has a range of up to 87 miles with the battery system. It can hit speeds up to 68 miles per hour, but is targeted at urban drivers.

Production has already begun, meanwhile, on a new car for the European market. Rather than power and speed, Ford Motor Co. boasts convenience and an easier way to get the kids in the car with its B-Max.

Dearborn, Mich.-based Ford created the small minivan without a traditional B-pillar — the vertical structural support between the first and second row of seats.

Removing the pillar and replacing the traditional rear door with a sliding door allows van users to get into the rear seats more easily. That makes it easier to get children into car seats or large packages in and out of the vehicle. But removing the B-pillar also eliminated the traditional location for front-row seat belts.

Seat supplier Johnson Controls Inc. had to design a front seat that integrated the seat-belt mechanism and developed all-new production at new sites in Romania, near Ford’s assembly plant in Craiova.

JCI, with auto­mo­tive operations based in Plymouth, Mich., and European offices in Bur­scheid, Germany, hired 185 people for the seat-assembly plant in Craiova. It also bought Romania’s Spumotim SA in late 2011, adding its urethane foam facility in Timisoara to produce seat pads for the B-Max seats.

Carbon fiber technologies will be a featured at the Plastics in Lightweight Vehicles 2012 conference, Nov. 6-7 in Livonia, Mich. For information see www.plasticsnews.com/plv2012.


Comments

Carbon fiber a hit in Paris

By Rhoda Miel
News Editor

Published: October 4, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

A. Schulman reports growth in sales and profit

October 22, 2014 7:58 pm ET

Executives with materials maker A. Schulman Inc. have to be smiling after seeing full results for the firm's 2014 fiscal year.    More

Image

PolyOne takes on LED lighting

October 22, 2014 4:23 pm ET

PolyOne Corp. is making inroads into LED lighting applications with its Therma-Tech-brand material technology.    More

Image

Simple lightweighting in packaging, caps not so simple anymore

October 22, 2014 4:16 pm ET

The days of finding simple ways to remove additional weight — and costs — from plastic bottles are over, according to one expert.    More

Image

Sales, orders climbing for Wittmann Battenfeld

October 22, 2014 4:04 pm ET

Equipment maker Wittmann Battenfeld GmbH expects sales this year to increase 7 percent, to 295 million euros, as it said some key markets, including...    More

Image

Bergen International adds manufacturing space, extrusion line

October 22, 2014 3:42 pm ET

Chemical foaming agent manufacturer Bergen International LLC recently doubled its manufacturing capacity, added an extrusion line and laboratory space...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events