Mexico’s light-vehicle efforts aid suppliers

By Stephen Downer
Correspondent

Published: October 8, 2012 6:00 am ET

Related to this story

Topics Materials, Automotive, Design

GUANAJUATO, MEXICO (Oct. 8, 1:25 p.m. ET — As the Mexican automotive industry advances inexorably toward its — and the federal government’s — goal of an installed assembly capacity of 4 million light vehicles by 2017, opportunities for plastics processors are becoming bigger by the day, experts say.

“All the auto makers are looking for suppliers in Mexico,” Eduardo Solís Sánchez, executive president of the country’s auto industry association Amia (Asociación Mexicana de la Industria Automotriz AC), told a major plastics industry conference in late September.

“They don’t necessarily want to import components and parts,” he said at the annual, two-day convention of Mexico’s plastics industry association, Anipac (Asociación Nacional de Industrias del Plástico AC), adding that the best opportunities are for Tier 1 suppliers.

At the same event, Rina Quijada, chief executive of IntelliChem Inc. of Houston, which provides intelligence for the petrochemical and plastics industries in Latin America, said the average content of plastics and compounds in light vehicles increased from a few pounds in 1960 to 375 pounds in 2010. By 2015 they will account for 10 percent (397 pounds) of a car’s average weight of 3,970 pounds, she said.

Thomas Karig, vice president of corporate relations and strategy of Volkswagen AG’s Mexico operations, who was not at the conference, told Plastics News exclusively by email that “it’s safe to say that polymer consumption for VW Group production in NA (VW Puebla, Chattanooga and Audi) might increase by approximately 30 percent until 2018, compared to 2011.”

A major concern aired by some of the 70 or so delegates and speakers is the shortage of specialist machine operators and mold makers in Mexico.

“Our problem is a lack of qualified staff,” said Sergio Beutelspacher Sandoval, Mexico’s prolific inventor of more than 1,000 individually designed extrusion and blow molding machines, several hundred of which have been exported across the Americas and to China.

His 35-year-old company, Beutelspacher SA de CV, of Mexico City, which employs 100, has grown 10 percent this year and Beutelspacher wants the expansion to continue. “But it’s difficult because the whole culture of toolmaking and other trades is being lost,” he told Plastics News.

Solís agreed. “We have a problem with [a shortage of] toolmakers.” Amia, he said, “is working with the suppliers association Ina [Industria Nacional de Autopartes AC] to try to rectify the situation.”

Francisco Antón Gabelich, managing director of Mexico’s government-run advanced technology center Ciateq (Centro de Tecnología Avanzada AC), a speaker at the congress, admitted to PN afterward that the organization does not offer mold-making courses at its half a dozen branches, either at graduate or post graduate level.

“This has to come from the technological colleges,” he said, adding, however, that multinational supplier Magna International Inc.’s technical college in the Mexican city of Puebla trains would-be toolmakers, 20 of whom have been employed in Germany in recent years.

During his hour-long presentation Solís said Mexico’s auto industry is the eighth largest in the world and the fourth-largest exporter of light vehicles. It assembled 2.55 million units in 2011 and is on course to produce 2.7 million this year (up 5.5 percent), 2.3 million or 85 percent of which will be exported, 64 percent of them to the United States. The likely production total in 2013 is 3 million, he said.

Lorenza Martínez Trigueros, Mexico’s deputy economy under minister, who inaugurated the event, said in March that Mexico will probably have an installed light vehicle assembly capacity of 4 million by 2017.

“We [the light vehicle makers] accounted for 19.8 percent of Mexico’s manufacturing gross national product in 2011 and generated $32.05 billion in foreign currency,” Solís added, pointing out that the sector “represents 4 percent of the [national] market for plastics.”

He stated that “more than 80 percent of the biggest auto industry suppliers in the world” have manufacturing operations in Mexico. Oscar Albín, Ina’s president, told PN in June that supplies, including those made of plastics, manufactured in Mexico for the global automotive industry totaled $65.03 billion in 2011, 13 percent more than the $57.54 billion produced in 2010.

According to Solís, Mexico is the United States’ largest supplier of auto parts, shipping $35.8 billion worth out of a total of $113.8 billion in 2011, while Quijada said auto parts are key in the process of developing the Mexican automotive industry.

“In Mexico,” she said, “the resins necessary to manufacture auto parts are in their infancy. There’s a growth opportunity for both the [resin] suppliers and processors working together.”

Apart from its “privileged geographical location,” three dozen free trade agreements and the expertise of its work force, Mexico has attracted investments from the largest vehicle makers and suppliers because it has economic and political stability, Solís said.

“The announcements by car makers of multibillion-dollar investments in Mexico in the past year were made while the country was in the middle of a pre-presidential election campaign, which speaks highly of our country,” he added.

Nissan Motor Co. Ltd., Ford Motor Co., Volkswagen AG, Honda Motor Co. Ltd., Chrysler Group LLC, General Motors Co. and Toyota Motor Corp. already assemble vehicles in Mexico and are expanding their facilities, while Mazda Motor Corp. and Audi AG are building assembly plants.

Mercedes-Benz, a division of Daimler AG, BMW AG and Toyota will probably build assembly facilities in Mexico also. According to a source mentioned in an article published by Automotive News in August, Mercedes-Benz and Toyota are considering Aguascalientes, while BMW prefers Querétaro.

Asked about reports in the Mexican media that Tata Motors, a division of India’s Tata Group, is also looking at the possibility of building an assembly plant in the country, Solís said: “I’ve been hearing about this for almost two years. I know some Mexicans are really involved.” Tata owns the Jaguar and Land Rover brands, among others.

An example of expansion projects by vehicle makers already operating in Mexico came in March. Dirk Grosse-Loheide, Volkswagen’s executive purchasing vice president for North America, said the German auto maker could produce up to 615,000 vehicles in Puebla in 2012, which would be a 20.5 percent increase on the 510,000 units it assembled there in 2011. Nissan is also preparing to build more than one million light vehicles a year in Mexico in the short term, it said in January, the same month it announced plans to build its third assembly plant in Mexico.

Solís said the importation of 6.6 million used vehicles from the United States in the past six years has damaged Mexico’s domestic market for new light vehicles, predicted to be 990,000 units this year, the same as 10 years ago.

“If we could sort out the internal market, we could build three new assembly plants,” he said.


Comments

Mexico’s light-vehicle efforts aid suppliers

By Stephen Downer
Correspondent

Published: October 8, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Plastics help designers bring home the gold

July 22, 2014 2:15 pm ET

Products with polymer content received multiple gold recognitions in the 2014 International Design Excellence Awards.    More

Image

DSM planning North American nylon plant

July 22, 2014 11:41 am ET

Materials firm Royal DSM NV plans to build a new nylon resin plant in North America, but no decision has been made on the plant's exact location.    More

Image

Design group Hexagon buys Vero Software to upgrade CAM capabilities

July 22, 2014 9:51 am ET

Stockholm-based Hexagon AB, a design technology company, has announced its acquisition of Vero Software, a leader in computer aided...    More

Image

Illinois injection molder expands

July 21, 2014 1:23 pm ET

Automotive supplier All-Rite Industries Inc. has added two new injection molding machines to its operations.    More

Image

More head-up displays going into cars, with improved information, graphics

July 21, 2014 10:48 am ET

Head-up displays with "augmented reality," the technology that employs much of the windshield as a display area for data and images, is poised to sign...    More

Market Reports

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Plastics Recycling Market Review & Outlook 2014

This special report from Plastics News examines the North American plastics recycling industry and provides insight into indicators that impact market viability, including Resin pricing trends for virgin and recycled market material and historical Resin production trends for post- consumer and industrial waste.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events