Shini steps up Chinese intellectual property fight

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: October 9, 2012 6:00 am ET

Related to this story

Topics Machinery, Design

TAIPEI, TAIWAN (Oct. 9, 2:20 p.m. ET) — Taiwanese auxiliary equipment maker Shini Group has stepped up its campaign against what it says are mainland Chinese companies who copy its design and equipment — including masquerading as Shini at trade shows and wearing company clothing that mimic the Taiwanese firm.

Shini, based in Taipei, Taiwan, has been aggressive in court cases in China, and claims it has won some important battles there. It recently took its arguments more globally, issuing English statements in late July in response to what an executive said was more aggressive worldwide marketing by some copycat firms.

In an interview at the Taipei Plas trade show, held Sept. 21-25 in Taipei, Overseas Business and Marketing Director Alan Chen said the economic stakes are substantial.

Chen estimated that in China alone, 10-20 percent of the market for auxiliary equipment for plastics processing violates some intellectual property or trademark of Shini, Conair Group, Wittmann Battenfeld GmbH or another global brand.

“They just keep coming up and coming up,” said Chen. “You stop one case, and five to 10 cases pop up. That is what I find most frustrating.”

Chen said court cases have helped tame the worst of the problems, such as competitors falsely claiming in advertisements and at trade shows that they were a branch of Shini or authorized to manufacture Shini equipment.

That has caused problems with customers, who buy the counterfeit equipment thinking it is from Shini and then when it breaks down, they call the Taiwanese firm to come and repair it.

“Many customers came back to us with service claims that we are not responsible for,” Chen said in an interview at Shini’s booth. “In lots of cases my service guys would go in and open up the machine, and say, ‘This is not my machine.’ The customer says, ‘What do you mean, it’s Shini.’

“This troubles us,” Chen said. “It’s our reputation.”

In two of the cases, Shini said the infringing firms had previously been agents for the Taiwanese firm but then began selling fake products with Shini labels or labels with a very similar name. One former agent copied Shini’s catalog, website and publicity material, the company said.

“What’s more, their staffs also wore the same Shini suits and used Shini business card[s],” the company said. “They used [a] quotation and sales contract by impersonating a branch company of Shini.”

Shini also said that some of the copycat firms also falsely claimed to be a “well-known brand” in Guangdong province, a government-issued designation that Shini was awarded in 2008 and that some Chinese companies feature prominently in their marketing.

Shini has a substantial production base and technology center in Dongguan, Guangdong province, in addition to factories elsewhere in China and in India.

The company is currently building a new manufacturing plant in the western Chinese city of Chongqing, which will be its sixth factory when it opens in 2014, and has become one of China’s largest makers of auxiliary equipment for plastics.

It’s not trying to stop competitors from manufacturing, just from infringing on Shini intellectual property, Chen said: “I am totally OK with them manufacturing products – just don’t tell people you are Shini.”

The company put a list of firms on its website that it says may falsely claim to be Shini, and included their websites. It said customers should only use the Shini website, www.shini.com, to verify company representation.

Chen said that while Shini will continue to defend itself in court, it also realizes it too has to keep innovating and can’t rely entirely on court cases.

“The best way is to move on, just keep ahead of them with new ideas, new technology, a new image,” Chen said. “It also forces you to develop your own style. You want to be the benchmark.”


Comments

Shini steps up Chinese intellectual property fight

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: October 9, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Prosthetic arm concept wins in student thermoforming competition

August 22, 2014 1:56 pm ET

Pressure forming company Freetech Plastics Inc. has returned with its annual Student Thermoformed Part Competition, intended to expand the exposure...    More

Image

Reiloy Westland to build new headquarters

August 22, 2014 12:53 pm ET

Reiloy Westland Corp. will build a 45,000-square-foot headquarters factory, as the Kansas maker of screws and barrels expands under the ownership of...    More

Image

Milacron commits $30 million to investment in India

August 20, 2014 5:42 pm ET

MUMBAI (Updated) — Cincinnati-based Milacron LLC plans to invest $30 million over the next three years in India. The investments will double...    More

Image

Trade group lists China's top plastics machinery manufacturers

August 15, 2014 9:58 am ET

The China Plastic Machine Industry Association has unveiled its latest rankings of the top 25 plastics machinery suppliers in China as well as...    More

Image

Wittmann Battenfeld adding machining center in Austria

August 15, 2014 9:42 am ET

Austrian injection molding and auxiliary equipment machinery company Wittmann Battenfeld GmbH is already increasing capacity of the new assembly hall ...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events