Slavin uses social-media to keep plastics dialogue honest

By Bill Bregar
Senior Staff Reporter

Published: October 10, 2012 6:00 am ET

Related to this story

Topics Sustainability, Thermoforming

GRAND RAPIDS, MICH. (Oct. 10, 1 p.m. ET) — Facebook and Twitter may seem alien to small manufacturers, but they are in a good position to deliver the truth about plastics, said Chandler Slavin, who scans social media for Dordan Manufacturing Co., her family’s custom packaging thermoformer.

Slavin, who began working for Dordan after graduating from college three years ago, has become a noted authority on social media. She blogs, tweets and posts on Facebook. She scans the Internet for people taking cheap shots at plastics, and responds.

She brought her message to the SPE Thermoforming Conference in Grand Rapids, delivering a rapid-fire speech Sept. 24 that summarized the history of plastics and the “new packaging world order” of social media.

The Internet may seem to be dominated by people who can shout the loudest, but Slavin said the broad middle ground of people are willing to listen to industry, and consider science-based arguments. But, she said, the big trade associations face a disadvantage in the blog-a-sphere. “People can look at them and already think they have a built-in bias,” she said. “With our industry, we’re family-owned. We’re medium-sized. We have a little bit more, I guess, of legitimacy.”

Slavin is sustainability coordinator and marketing manager for Dordan, in Woodstock, Ill. She thinks plastics trade associations should work together more closely, but said putting out the industry’s message about plastics, and countering critics, comes one person, one company, at a time.

When an audience member asked her how thermoformers can collectively counter what can seems to be a one-sided battle against plastics, she described social media as more word-of-mouth than run by a committee: “I would suggest that everybody do it themselves. If you don’t have a person who is at all engaged with social media, you can’t be there to rebuke.”

The word gets passed along, retweeted, around the world. She gave a case study. She was looking at her Twitter feed several weeks ago when she found one from a group called Teens Turning Green that has more than 3,000 followers. “And, a lot of people were listening that day when they tweeted “Plastics are cheap, nasty and toxic.”

Slavin followed the link to a website advertising “green” beauty products, and there she found a blog post titled “Plastics are Forever” which touched on plastics ocean debris and other topics, in what she called a “reductionist and uninformed treatment of plastic and the environment.”

At the same time, she read a PlasticsNews.com story about plastic litter found in seabirds. Slavin, who had participated in a panel discussion on ocean debris, did not agree with the assertions.

She posted a rebuttal, titled “Plastics are ‘cheap, nasty and toxic’ HA! Investigation into plastics ocean debris,” and Plastics News featured the discussion in a Perspective column. Then the PN feature got picked up by the Sustainable Packaging Coalition’s August newsletter.

Slavin’s comments generated more than 20 comments.

She posted her Thermoforming Conference speech on Dordan’s blog, www.recyclingpackaging.org.

In her speech, she said early plastics such as Bakelite were seen as marvels of science and industry. “Today, however, plastics are no longer synonymous with man’s ingenuity but representative of our over-consumptive and disposable society,” she said. Plastics have become cheap and disposable and, too often on the digital maelstrom that is the Internet, just plain evil.


Comments

Slavin uses social-media to keep plastics dialogue honest

By Bill Bregar
Senior Staff Reporter

Published: October 10, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

New York City officials avoid taking a stand on plastic bag fee

November 20, 2014 11:28 am ET

New York Mayor Bill de Blasio's administration claimed Nov. 19 to be committed to dramatically reducing plastic bag consumption in New York City, but ...    More

Image

Agilyx facing nearly $50,000 in fines from Oregon DEQ

November 20, 2014 11:59 am ET

Agilyx Corp., a plastic waste-to-oil company, is facing nearly $50,000 in fines for alleged hazardous waste violations at its Tigard, Ore., research...    More

Image

Environmental group focusing on producer responsibility in packaging

November 20, 2014 11:04 am ET

Athens, Ga.-based environmental group Upstream is out with a new paper entitled “Advancing Local Government's Interests through Extended...    More

Image

NS Farrington 'on track' to recycle 1 ton of PE per month

November 20, 2014 10:23 am ET

A polyethylene recycling program created by N.S. Farrington & Co. has passed the 60,000 pound mark.    More

Image

Silica can replace plastic microbeads

November 19, 2014 6:00 am ET

As cosmetics and soap makers face pressure to remove plastic microbeads from their products, Evonik Industries touts its new silica-based microbeads a...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events