Slavin uses social-media to keep plastics dialogue honest

By Bill Bregar
Senior Staff Reporter

Published: October 10, 2012 6:00 am ET

Related to this story

Topics Sustainability, Thermoforming

GRAND RAPIDS, MICH. (Oct. 10, 1 p.m. ET) — Facebook and Twitter may seem alien to small manufacturers, but they are in a good position to deliver the truth about plastics, said Chandler Slavin, who scans social media for Dordan Manufacturing Co., her family’s custom packaging thermoformer.

Slavin, who began working for Dordan after graduating from college three years ago, has become a noted authority on social media. She blogs, tweets and posts on Facebook. She scans the Internet for people taking cheap shots at plastics, and responds.

She brought her message to the SPE Thermoforming Conference in Grand Rapids, delivering a rapid-fire speech Sept. 24 that summarized the history of plastics and the “new packaging world order” of social media.

The Internet may seem to be dominated by people who can shout the loudest, but Slavin said the broad middle ground of people are willing to listen to industry, and consider science-based arguments. But, she said, the big trade associations face a disadvantage in the blog-a-sphere. “People can look at them and already think they have a built-in bias,” she said. “With our industry, we’re family-owned. We’re medium-sized. We have a little bit more, I guess, of legitimacy.”

Slavin is sustainability coordinator and marketing manager for Dordan, in Woodstock, Ill. She thinks plastics trade associations should work together more closely, but said putting out the industry’s message about plastics, and countering critics, comes one person, one company, at a time.

When an audience member asked her how thermoformers can collectively counter what can seems to be a one-sided battle against plastics, she described social media as more word-of-mouth than run by a committee: “I would suggest that everybody do it themselves. If you don’t have a person who is at all engaged with social media, you can’t be there to rebuke.”

The word gets passed along, retweeted, around the world. She gave a case study. She was looking at her Twitter feed several weeks ago when she found one from a group called Teens Turning Green that has more than 3,000 followers. “And, a lot of people were listening that day when they tweeted “Plastics are cheap, nasty and toxic.”

Slavin followed the link to a website advertising “green” beauty products, and there she found a blog post titled “Plastics are Forever” which touched on plastics ocean debris and other topics, in what she called a “reductionist and uninformed treatment of plastic and the environment.”

At the same time, she read a PlasticsNews.com story about plastic litter found in seabirds. Slavin, who had participated in a panel discussion on ocean debris, did not agree with the assertions.

She posted a rebuttal, titled “Plastics are ‘cheap, nasty and toxic’ HA! Investigation into plastics ocean debris,” and Plastics News featured the discussion in a Perspective column. Then the PN feature got picked up by the Sustainable Packaging Coalition’s August newsletter.

Slavin’s comments generated more than 20 comments.

She posted her Thermoforming Conference speech on Dordan’s blog, www.recyclingpackaging.org.

In her speech, she said early plastics such as Bakelite were seen as marvels of science and industry. “Today, however, plastics are no longer synonymous with man’s ingenuity but representative of our over-consumptive and disposable society,” she said. Plastics have become cheap and disposable and, too often on the digital maelstrom that is the Internet, just plain evil.


Comments

Slavin uses social-media to keep plastics dialogue honest

By Bill Bregar
Senior Staff Reporter

Published: October 10, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Non-recyclable items gumming up the works at recycling centers

August 21, 2014 3:46 pm ET

The influx of all sorts of unacceptable items at recycling centers has gotten to the point that Charlotte, N.C.-based ReCommunity is trying to bring...    More

Image

Bayer, SCAC partner on water reuse project

August 21, 2014 12:48 pm ET

Bayer MaterialScience (BMS) and Shanghai Chlor-Alkali Chemical Co. Ltd. (SCAC) have entered into a preliminary agreement for the reuse of waste water ...    More

Image

Automakers look under the hood for the next lightweighting opportunities

August 20, 2014 1:06 pm ET

The automotive industry's current favorite target for lightweighting efforts is the powertrain, according to a recent survey.    More

Image

GameDay Challenge expands the competition to the recycling bin

August 20, 2014 10:23 am ET

GameDay Recycling Challenge is returning this year as college football stadiums will compete to see which school produces the least amount of waste...    More

Image

Faerch Plast doubling capacity in UK

August 20, 2014 9:42 am ET

R. Faerch Plast A/S, one of Europe’s leading producers of plastic containers for the food industry, is set to double production capa...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events