Depreciating rupee hits Taiwanese equipment makers

By Satnam Singh
Correspondent

Published: October 10, 2012 6:00 am ET

Related to this story

Topics Machinery, Molds/Tooling

KOLKATA, INDIA (Oct. 10, 11:15 a.m. ET) — Taiwan’s plastics machinery makers are worried about a 40 percent fall in their order books in India, one of their largest export markets, following this year’s sharp drop in the value of the Indian currency against the U.S. dollar.

Speaking at the Indplas 2012 show, held Oct. 5-8 in Kolkata, Taiwanese firms said the depreciation of the rupee has led to big drop in what had been full order books a year ago. But they are hopeful the currency will stabilize and Indian companies will resume capital investment that they have put on hold.

The Indian currency fell from 48.6 rupees to the dollar in early 2012 to 57.1 at the end of June, before recovering somewhat to its current level of almost 53 rupees to the American greenback.

‘‘We have exported a lot of machinery to the automotive industry in India, but due to the slowdown in the Indian automobile market from the beginning of 2012, orders have dropped by almost 40-50 percent from last year,’’ said Grace Lin, the Africa and India Manager for Tianan, Taiwan-based Huarong Plastic Machinery Co. Ltd.

Huarong exported 200 injection molding machines to India in the last three years, and has offices in Delhi, Pune, Ahmedabad and Bangalore. About 80 percent of its business is in the country’s automotive market. But the falling rupee has made its equipment more expensive for Indian firms, Lin said.

She said the company has also been hurt by the closing of Indian car maker Maruti-Suzuki’s plant in Manesar for almost three months, after violence broke out and workers burned down part of the factory.

“The vendors of Maruti-Suzuki have been forced to shut down their operations and stopped sourcing machinery from us,” Lin said.

The company is looking to new markets in India, including in-mold labeling and two-color injection machines, and also is supplying six machines to India’s Central Institute of Plastic Engineering & Technology (CIPET), the first by any Taiwanese company to an Indian government organization, she said.

As well, business slowed down in 2012 for AFTA Technology Co. Ltd., a subsidiary of large Taiwanese press maker Fu Chun Shin, which has been selling equipment to India’s automotive sector for 25 years, including 10 machines making components for automaker Tata’s Nano car, said Diana Sung, a manager for Pune-based AFTA.

‘‘We are waiting for the Indian currency to stabilize against the dollar,’’ she said.

Taiwanese equipment supplier Steady Stream Business Co. Ltd. estimates that business is down almost 60 percent this year as its customers in the automotive industry have put projects on hold, waiting for the rupee to rebound.

‘‘We are hoping the worst is over,’’ said Vice General Manager Kenny Chen.

The company, which supplies tooling, injection molding and equipment, is changing its strategy away from major cities like Mumbai, Delhi and Chennai to move deeper into the Indian hinterland.

‘‘We have now changed the strategy and shifted our focus to Tier 2 and Tier 3 cities,” Chen said.

That’s a switch mirrored by other Taiwanese companies, said May Chien, director of business development for Pilatus International Co. Ltd., the Taipei, Taiwan-based marketing agent for the Indplas show.

‘‘India is big market for us and it cannot be ignored,’’ she said. ‘‘Therefore, we are looking for newer markets in the country. Earlier, we used to be more focused on the plastics shows organized in the cities of Delhi and Mumbai. Now we are focusing on the other parts of India.’’

She said the eastern regions of India could be a big market for Taiwanese companies in the near future.

Taiwanese firms have also been helped by the Indian government decision to put anti-dumping duties of up to 174 percent on some types of injection molding machines imported from mainland China, Chien said.

‘‘We are working hard to maintain a good market for our machinery in India,” she said.

Reflecting growing business in eastern India, the Taiwan External Trade Development Council, a government backed non-profit trade promotion organization, plans to open an office in Kolkata next year, said Chie Yien Huang, India director for TAITRA.

Huang said trade between India and Taiwan had been on an upward trend for five years before it suffered in 2012 because of the rupee depreciation and the recession in the European Union.

India was Taiwan’s third-largest market for plastic and rubber machinery exports in 2011, with Indian companies importing $95 million worth of equipment, up seven percent from 2010, Huang said.

TAITRA brought 11 exhibitors to the Indplas show.


Comments

Depreciating rupee hits Taiwanese equipment makers

By Satnam Singh
Correspondent

Published: October 10, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

JSW looks to improve equipment servicing in Europe through contract

April 15, 2014 11:09 am ET

Tokyo-based manufacturer of extruding machinery Japan Steel Works (JSW) has signed an agreement with a Dutch company to help it improve servicing on...    More

Image

US equipment firm buys Negri Bossi

April 14, 2014 1:58 pm ET

Italian plastics equipment major Sacmi Group's offerings are getting a U.S. identity. Sacmi has sold its plastics division to Kingsbury Corp., a...    More

Reality may be pulling back on 3-D investors' expectations — and cash

April 11, 2014 2:23 pm ET

Makers of 3-D printers have seen plenty of positive news stories, but falling share prices.    More

3-D printer firms beef up, build supply chain

April 11, 2014 2:32 pm ET

Driven by prospects for direct manufacturing of finished products, makers of 3-D printing equipment are moving to buy add-on companies like additive...    More

Image

Engel creates new Wintec brand for Asia

April 11, 2014 2:17 pm ET

Engel Holding GmbH has formed a new subsidiary in China that will sell injection molding machinery in Asia under a new brand name: Wintec.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events