Recycling challenges include container lightweighting, bale contamination

Mike Verespej

Published: October 10, 2012 6:00 am ET

Related to this story

Topics Materials, Suppliers, Sustainability, Packaging, Recycling

WASHINGTON (Oct. 10, 9:40 a.m. ET) — The impact of lightweighting — while positive from a sustainability standpoint — continues to have a dampening effort on plastic bottle recycling.

“Lightweighting meets economic and sustainability goals [and is] more economically sustainable, but in the short-term, it is not good if you are running a recycling business,” said David Cornell, technical director of the Association of Postconsumer Plastic Recyclers.

Exacerbating that trend is that per person consumption of plastic bottles has flattened, he said.

“The long-term trend on consumption of plastic bottles/person does not show growth,” said Cornell. “It is back at 2004 levels and less than it was before the 2008 recession. And I don’t think we’re going to see growth for awhile.”

That was reflected in the amount of plastic bottles recycled in 2011. Although the total number of pounds of plastic bottles increased 45 million pounds to a record 2.624 billion, the individual numbers paint a starker picture.

The amount of PET bottles recycled increased by 47 million pounds — or just 1.7 percent — in 2011 and the amount of high density polyethylene bottles declined by slightly more than 10 million pounds, according to data in the post-consumer plastics bottle recycling report released Oct. 10 by the plastics division of the American Chemistry Council and APR.

In addition, the five-year compounded annual growth rate for plastic bottles is just 3.4 percent. PET and HDPE account for 98.2 percent of all plastic bottles recycled with polypropylene bottles accounting for another 1.7 percent.

"2011 was a stagnant year for postconsumer plastic bottle recycling, resulting in little change in the collection recycling rate,” said the report, with the all-bottle recycling rate inching up one-tenth of one percentage point to 28.9 percent, the PET rate increasing by two-tenths of a percentage point to 29.3 percent and the HDPE rate staying flat at 29.9 percent.

“We are seeing a continuation of lightweighting bottles, which hurts the pounds,” Cornell said in a phone interview. “There are more units, but we are not moving as many pounds as we would like.

Both HDPE and PET reclaimers are benefiting, however, from less material going to export.

“Exports of both PET and HDPE recycled bales decreased substantially, with sales to Asia down,” the report said. Roughly 43 percent of recycled PET and 17.6 percent of recycled HDPE was exported—both down from previous years.

“The big news is that export buyers are down and that’s expected to continue in the near-term — for at least the next few years,” Cornell said. “The Chinese economy has gone into a slowdown like other economies and they are no longer [importing] unwashed material.”

Because of the increasing North American demand, domestic companies now have more ability to pay higher prices and “were more effective” competing for baled plastics, Cornell said.

But while that has helped recyclers get more material, some of those gains have been countered by lower bale yields. Yields averaged just under 80 percent for HDPE recyclers and anywhere from 65-75 percent PET recyclers, reducing the amount of good quality material available.

“Contamination is a continuing issue,” Cornell said. “The more material people seek, the more they end up collecting things they don’t want.” And that’s compounded further for PET recyclers by a growth in full-wrap bottle labels and pressure-sensitive labels on thermoform packages that reduce yields.

“Packagers need to understand how their decisions aren’t friendly to recyclers and the industry needs to have a clear voice and message they can send to packaging companies,” said Cornell, who has helped developed the Design for Recycling Guidelines on the APR website.

But possibly the biggest challenge facing the industry is the shortage of supply which has led to low capacity utilization, with PET reclaimers at a capacity utilization rate of 67 percent and HDPE reclaimers at a capacity utilization of 80 percent.

A number in the mid-to-upper 80s—if not 90 percent—is typically the target, said Cornell. “That’s on the low side of where they need to be.”

The biggest trouble spot is in PET where capacity is currently 1.755 billion pounds — which is 10 percent more than 1.6 billion pounds of PET collected in 2011 — 43 percent of which went to export markets, leaving only 916 million pounds for the U.S. market.

“Folks who invest the dollars need to understand that their raw material source is not unlimited,” said Cornell. “Some will have a rude awakening. The capacity utilization issue is a huge one.”

Cornell does not expect a massive change in the amount of bottle material recycled or the recycling rate for bottles. “We’d have to have a substantial change in the collection mindset,” he said. “And I don’t see any drumbeat for that.”

But he is encouraged by the bulky rigid plastic pilot programs at grocery stores that could lead to increased collection of those materials, and the initiatives to recycle thermoformed PET packaging.

“There about 1 billion pounds of PET that go into thermoform packaging,” Cornell said. “That is a growth area for collection” that only just reached the radar screen in 2011, with 24.9 million pounds collected in PET thermoform bales. “My guess is that we’ll see major PET recyclers go after thermoforms.”

And he sees bulky rigids in the backrooms of supermarkets doing for PP what soda did for PET recycling years ago.

“It is high-grade, clean material and an assured supply — and there is a lot of it,” Cornell said. APR has estimated that 354 million pounds of bulky rigids — divided nearly equally between PP and HDPE — are used annually by medium to large grocers.

“There will be a continued growth in the supply of this material at grocers and they would like to make it a revenue stream instead of a cost,” Cornell said. “The world of PP recycling is looking better.”

The all-bottle report estimated that 43.8 million pounds of post-consumer PP was collected and recycled in 2011 compared to 35.4 million in 2010.

“The interest in recycling bulky rigids and tubs in grocery stores continues to grow,” he said. “It’s a win-win for grocery stores and for recyclers.”


Comments

Recycling challenges include container lightweighting, bale contamination

Mike Verespej

Published: October 10, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Australian firm buys Chemical Market Resources

September 23, 2014 8:42 pm ET

In an international consulting deal, Chemical Market Resources Inc. has been acquired by TZ Minerals International Pty. Ltd. for an undisclosed price.    More

Image

Ewikon, Gammaflux form private-label partnership

September 23, 2014 2:47 pm ET

German hot runner manufacturer Ewikon GmbH is forming a private-label partnership with Gammaflux LP, Ewikon announced at a Technology Day held Sept....    More

Image

PolyOne opens new plant in India

September 23, 2014 3:11 pm ET

North American compounding leader PolyOne Corp. has opened a new plant in Pune, India.    More

Image

Study: Consumers, industry EPS recycling rates on the rise

September 23, 2014 2:22 pm ET

Recycling of post-consumer and post-commercial expanded polystyrene hit an all-time high of 34 percent in 2013, according to a new report.    More

Image

Chinese mold makers say they don't worry about reshoring trends

September 23, 2014 12:05 pm ET

Reshoring may be a hot topic in U.S. manufacturing circles, but the mid-level and small players putting in appearances at this year's AsiaMold in Guan...    More

Market Reports

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

Our special market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Economics editor, Bill Wood, forecasts market growth and industry thought leaders offer competitive insight on key issues and trends impacting PP&T processors.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook – North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events