Polypropylene price increase tied to propylene mononer tightness

By Frank Esposito
Senior Staff Reporter

Published: October 11, 2012 6:00 am ET

Related to this story

Topics Materials Suppliers
Companies & Associations

AKRON, OHIO (Oct. 11, 1:45 p.m. ET) — After several price declines, North American polypropylene prices managed to tick up an average of 1 cent per pound in September.

Buyers contacted by Plastics News said the increase was tied to a change in price for propylene monomer feedstock. Regional PP prices had tumbled an average of 27 cents per pound since May, after climbing an average of 22 cents per pound in the first four months of the year.

The September increase means that regional PP prices now are down a net of 4 cents per pound since January – an overall decline of about 4 percent for the year to date, based on price of homopolymer grades of PP used in injection molding.

A U.S. West Coast-based PP buyer said recent high gasoline prices may have caused tightness in the propylene market, since propylene can be used as a gasoline additive. Higher gasoline prices could have convinced propylene makers to sell into that market rather than into PP. The resulting tightness would have helped push the September PP increase through, the West Coast buyer said.

Propylene monomer prices already have settled up 1.5 cents per pound for October, which could lead to another PP price increase as well. Some PP buyers said they expected further price increases through the end of the year, but Scott Newell, a PP market analyst with Resin Technology Inc. in Fort Worth, Texas, said he wouldn’t be surprised if market prices remained flat during that period.

Overall, prices could be “in line with the price levels we’ve had now for five months,” Newell added.

One PP buyer in the U.S. Midwest went against the grain by saying he expected a couple of cents worth of price erosion by the end of the year.

“Demand is not strong,” the Midwest buyer said. “It only appears that way due to pre-buys.”

Through July, U.S./Canadian PP sales were up 3.3 percent, according to the American Chemistry Council in Washington. Domestic sales growth of 5 percent was dampened by a drop of more than 20 percent in export sales.

Among domestic PP end markets, injection molded cups and containers led the way through July with sales growth of more than 22 percent vs. the year-ago period, according to ACC. Regional sales into transportation-based PP injection molding also grew almost five percent in that span.

PP sales in the region to resellers, distributors and compounders also grew almost 16 percent through July, according to ACC. Of those three sectors, resellers posted the highest growth rate, checking in at more than 18 percent.

Last year’s U.S./Canadian PP sales total of 16.4 billion pounds was the lowest of the five-year period between 2007-11, and was 15 percent below the market’s 2007 sales total of 19.3 billion pounds.


Comments

Polypropylene price increase tied to propylene mononer tightness

By Frank Esposito
Senior Staff Reporter

Published: October 11, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

PolyOne launches Geon BIO PVC using soy-based materials

April 24, 2015 11:48 am ET

More than a decade of research is paying off for Battelle Memorial Institute in the form of Geon BIO PVC compounds from PolyOne Corp.    More

Image

Study suggests infants at lower risk from BPA exposure than expected

April 23, 2015 4:58 pm ET

A new study shows that newborn babies may have less risk from bisphenol A exposure than originally thought.    More

Image

Braskem and Odebrecht reconsidering West Virginia plastics project

April 23, 2015 2:54 pm ET

Brazilian firms Braskem and Odebrecht have confirmed that they are re-evaluating Project Ascent, the major plastics and petrochemicals project they...    More

Image

DuPont center in India gets LEED Certification

April 23, 2015 1:07 pm ET

DuPont Co.'s Knowledge Center in Hyderabad, India, was awarded LEED certification by the U.S. Green Building Council.    More

Image

SiVance opens new R&D lab

April 23, 2015 12:07 pm ET

Milliken & Co. unit SiVance LLC has opened a new research and development lab for silicone and silane technologies in Gainesville, Fla.    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 15, 2015 - September 17, 2015Plastics Caps & Closures - September 2015

More Events