Bioplastic market set to soar, but support needed

Published: October 11, 2012 6:00 am ET

Related to this story

Topics Sustainability, Materials, Suppliers

BERLIN (Oct. 11, 1 p.m. ET) — The global market for bioplastics is expected to grow way beyond earlier forecasts as advances in production technologies render previous predictions “obsolete.”

Berlin-based European Bioplastics, an industry association, said in its annual report that the current volume figure of 1.2 million metric tons is likely to grow fivefold between now and 2016.

Bio-based PET is likely to be a big contributor to this figure, with capacity expected to grow 10 times during the next four years.

However, policy makers were urged to back words of support for the sector with “concrete measures,” lest production drifts to emerging markets.

Driving the capacity increase will be the bio-based, non-biodegradable bioplastics group, the association’s report said, “especially the so-called ‘drop-in’ solutions,” such as biobased versions of polyethylene and PET.

“Leading the field is partially biobased PET, which is already accounting for approximately 40 percent of the global bioplastics production capacity. Partially biobased PET will continue to extend this lead to more than 4.6 million metric tons by 2016.”

European Bioplastics said this would correspond to 80 percent of the total bioplastics production capacity. Following PET is biobased PE at 250,000 metric tons, constituting more than 4 percent of the total production capacity, the organization said.

Hasso von Pogrell, managing director of European Bioplastics, said: “The enormous growth makes allowance for the constantly increasing demand for sustainable solutions in the plastics market.

“Eventually, bioplastics have achieved an established position in numerous application areas, from the packaging market to the electronics sector and the automotive industry.”

European Bioplastics warned of what it called a “disturbing trend”: the geographic distribution of production capacities away from Europe and towards South America and Asia.

Andy Sweetman, the trade association’s chairman, said: “European Bioplastics invites European policy makers to convert their declared interest into concrete measures.

“We are seeing many general supportive statements at EU level and in the member states. There is, however, a lack of concrete measures.

“If Europe wants to profit from growth at all levels of the value chain in our industry, it is high time the corresponding decisions are made.”


Comments

Bioplastic market set to soar, but support needed

Published: October 11, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Oxford Polymers adds compounding capacity

January 30, 2015 1:16 pm ET

Materials maker Oxford Polymers has increased its compounding capacity by installing a new single-screw extrusion line.    More

Image

Marval's next generation expands capacity

January 30, 2015 1:27 pm ET

MAMARONECK, N.Y. — There’s a lot of history at Marval Industries Inc., but the 59-year-old compounding firm also is looking toward the...    More

Image

Yizumi's stock price shoots up

January 30, 2015 11:56 am ET

Chinese injection press maker Guangdong Yizumi Precision Machinery Co. Ltd. has seen its stock price more than double in the first five trading days...    More

Image

Lubrizol buys Brazil-based coatings technology manufacturer

January 30, 2015 11:50 am ET

Specialty chemicals company Lubrizol Corp. of Wickliffe, Ohio, said it has acquired a Brazilian company that makes coatings technology for products...    More

Image

China to lead the way on robots

January 30, 2015 11:12 am ET

More industrial robots will be operating in China’s production plants than in the European Union or North America by 2017.    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events