Engel highlights technology

By Roger Renstrom
Correspondent

Published: October 11, 2012 6:00 am ET

Engel’s Joachim Kragl, left, and Jeff Hershey at Engel’s technical center in Corona, Calif. (Plastics News photo by Roger Renstrom)

Related to this story

Topics Machinery, Molds/Tooling

CORONA, CALIF. (Oct. 11, 1 p.m. ET) — Polymers and processing technologies play a key role in future development of health-care products.

An aging population and increasing demand for treatment of diabetic, cardiovascular and respiratory conditions drive the global market for medical devices and equipment.

Engel Machinery Inc. of York, Pa., explored that market through an Oct. 2-4 symposium at its Corona technical center addressing issues in the molding of thermoplastics and liquid silicone rubber for medical applications.

Engel’s Joachim Kragl explained a process-control system — iQ weight control — that derives essential process parameters from a machine’s screw position and injection pressure curves. Engel says the system compensates for short- and long-term quality deviations and results in sustained improvement in repeatability.

The idea originated with Georg Pillwein, a physicist and project engineer in the process development technology department at family-owned parent firm Engel Austria GmbH in Schwertberg, Austria.

Engel will introduce iQ weight control commercially at the Schall organization’s Fakuma trade fair Oct. 16-20 in Friedrichshafen, Germany. Previously, Engel showed the concept at a company symposium in June in Austria.

The iQ concept for part weight control is “one of the top five developments in machine software for repeatability in the last 10 years,” said Kragl, director of advanced molding systems and processing for Engel North America in York.

Engel’s Steve Broadbent said the 2011 U.S. demand for silicone was $250 million with medical as the fastest-growing market from 2001 to 2011. He said that continued strong and steady growth in medical-product shipments would drive advances in silicone demand through 2016. Broadbent is Engel North America process engineer for elastomers and LSR.

Jerry Seidelman discussed in-mold labeling including how a forensic coding — visible to a sensing device but invisible to the naked eye — can be placed in a label. The coding aims to combat the market potential for counterfeit products. Seidelman is sales and marketing manager with Tech Mold Inc. of Tempe, Ariz.

Jan Nietsch talked about the Sigma inside concept of molding automation specialist Hekuma GmbH of Eching, Germany. The concept facilitates cavity-separated parts collection, shorter mold-open time than possible with free-falling parts and verification of parts removal to avoid mold damage. Nietsch is based in Laguna Beach, Calif., as Hekuma business development manager for the Americas.

Engel’s Robert Herman reviewed the value of strict-separation techniques in clean room molding of medical devices. The separations involve input-output, delivery-dispatch, material air locks and personnel air locks. Herman in Schwertberg is sales manager for Engel’s medical business unit.

Sabic Innovative Plastics reiterated needs concerning health-care products and cited how the firm is responding.

Greater global agency oversight can enhance the safety of medical devices, packaging and drugs, said Lori Boechler, senior sales development leader in San Diego with Sabic. She was referring to regulations and laws relating to the U.S. Food and Drug Administration, European Union food-contact oversight and Chinese state food and drug administration.

Sabic said it pre-assesses biocompatible materials for conformance or compliance with a manufacturer’s final tests and the resin supplier seeks to avoid formula changes to “help minimize the potential for a resin’s chemistry to be the root cause of a medical-device non-conformance or non-compliance.”

Engel’s Tim Campbell reviewed the firm’s e-factory 2 production-monitoring system that was released in May as a successor to e-factory 1 software. The new system runs on a server, collects process data, manages mold setups and can connect with the injection molding machines of other manufacturers through protocols of the Euromap 63 data-exchange interface. Campbell is an Engel service technician in Waterloo, Ontario.

Engel demonstrated three machines:

* A 110-ton hybrid tie-bar-less e-motion 310 LSR press with all-electric injection and servo-hydraulic clamps ran a 16-cavity mold from Tech Mold in making a long, thin 5-cubic-centimeter syringe barrel. The material was clarified 13T25A random copolymer polypropylene that Koch Industries Inc.’s Flint Hills Resources LLC unit makes in Longview, Texas, and distributes through partner PolyOne Corp. of Avon Lake, Ohio. The cycle time was 5.5 seconds.

* A 55-ton e-victory 200 LSR press with a servo-hydraulic Ecodrive system ran a four-cavity mold and dosing system, both from Elmet North America Inc., in manufacturing an LSR nasal prong of 50-durometer LSR from the eight-resin-grade platinum-catalyzed heat-cured QP1 material series of Midland, Mich.-based Dow Corning Corp. The cycle time was 29 seconds.

* A 60-ton all-electric e-motion 200 press utilized Engel’s x-melt process and a single cavity thin-wall mold in producing a polypropylene device cover; the system can process polycarbonate for a medical application. Incorporating a long flow time, the process makes use of energy stored the highly compressed melt up to 40,000 pounds per square inch in the space in front of the screw. The cycle time was seven seconds.

Engel also demonstrated a fully integrated water manifold system, named flomo, on the 110- and 55-ton presses.

Kragl said flomo with vortex sensors replaces a previous Engel flow-monitoring system from several years ago. “It was sold twice and was too expensive for the market,” Kragl noted.

The current compactly designed flomo water manifold enables electronic process monitoring of all cooling units.

Engel’s integrated three-axis servo Viper robot removed the nasal prong and the device cover from, respectively, the 55- and 60-ton presses.

Engel shipped the demonstration e-victory 55 from Corona to Minnesota for the UBM Canon Medical Design and Manufacturing Minneapolis exhibition, held Oct. 31-Nov. 1, and plans to show the same press during the MD&M West trade event on Feb. 12-14 in Anaheim, Calif.

Engel found eager reception for in-depth training on LSR equipment.

The scheduled third day for the symposium was oversubscribed. The focused hands-on program covered technical details including the maintenance and assembly of dosing systems and injection units and the systematic approach to developing stable LSR process startup and monitoring.

Engel set a registration limit of 12 — and allowed 13 — for the LSR training. Fifty people wanted to attend. Engel plans to schedule additional LSR programs in Corona to train those unable to be accommodated on Oct. 4.

At the Fakuma show, Engel plans to show an e-mac press initially for the European market. The intention is to supply an electrical line that is priced like a hydraulic and has a reengineered CC200 controller.

Engel started e-mac development in early 2011 and conducted internal beta trials in late 2011. The e-mac is mechanically comparable to Engel’s e-max machine, which has a LC200 controller. Engel aims to introduce the e-mac to the U.S. market in late 2013 and target California processors needing 50-110-ton clamping forces for medical molding. Engel said it will continue to make the e-max line available.

Engel opened the 7,200-square-foot Corona technical center in 2009 to serve the western United States and parts of northern Mexico. Engel Machinery’s western U.S. region employs 16 including six sales people, nine service technicians and Jeff Hershey, regional sales and national accounts manager.


Comments

Engel highlights technology

By Roger Renstrom
Correspondent

Published: October 11, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Munson Machinery expanding assembly, testing operations

July 22, 2014 2:02 pm ET

Munson Machinery Co. Inc. is expanding its headquarters factory by about one-third in Utica, N.Y., where the company makes mixing, blending and size-...    More

Image

Windmöller & Hölscher looking to continued growth in China

July 21, 2014 3:40 pm ET

With 2013 global sales of 600 million euros, China has grown into an important export market for Windmöller & Hölscher KG, second only to the United...    More

Image

Thermoforming Technology Group adds Lyle Industries to its portfolio

July 18, 2014 2:48 pm ET

Thermoforming Technology Group LLC has expanded its thermoforming equipment presence with the acquisition of Lyle Industries Inc.    More

Image

Milacron names Gallagher COO

July 17, 2014 1:41 pm ET

U.S. machinery maker Milacron LLC has named John J. Gallagher III as Chief Operating Officer for its Melt Delivery & Control Systems, Fluid...    More

Image

Wisconsin mold maker doubling facility size

July 16, 2014 2:05 pm ET

A Germantown, Wis. toolmaker is planning to more than double the size of its facility.    More

Market Reports

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Plastics Recycling Market Review & Outlook 2014

This special report from Plastics News examines the North American plastics recycling industry and provides insight into indicators that impact market viability, including Resin pricing trends for virgin and recycled market material and historical Resin production trends for post- consumer and industrial waste.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events