UMass Lowell debuts tech center

By Frank Antosiewicz
Correspondent

Published: October 12, 2012 6:00 am ET

Professor Bob Malloy shows off a Technovell twin-screw extruder in UMass Lowell’s new Emerging Technologies and Innovation Center. (Plastics News photo by Frank Antosiewicz)

Related to this story

Topics Injection Molding, Molds/Tooling

LOWELL, MASS. (Oct. 12, 1:45 p.m. ET)  — For UMass Lowell’s academic community and assorted guests like Gov. Deval Patrick, the Oct. 11 unveiling of its new $80 million, 84,000-square-foot Emerging Technologies and Innovation Center was a reason for the school band to play and signal the start of a new era.

“The importance of what we are trying to do here in Massachusetts warrants the investment. We must have opportunities for the young and those not so young,” said Gov. Patrick, during festivities attended by more than 400 people.

The four-story facility stood in the background adorned with the slogan “Where ingenuity meets industry.” Among its goals are to serve as a research and academic facility, a hub for developing advanced manufacturing, fostering industry partnerships and building on research in polymers, nano­technology, optics and molecular biology.

“ETIC will foster new innovations and new technologies. This is an exciting day for the university,” said Marty Meehan, chancellor of the University of Massachusetts Lowell.

The new building contains 18 laboratories, 23 offices, four conference rooms and clean rooms designated as Class 100, 1,000 and 10,000. A large chunk of its funding — $35 million — came from the Massachusetts Economic Investment Act of 2006. It did receive other state and federal funding as well as $7 million in donations from individuals and industry.

Current students and alumni alike were pleased with the new surroundings.

“It’s nice. The other labs were accumulated over time. They were not as organized … but here it’s nice that everything is where it needs to be,” said Kylie Speir, a doctoral student.

Barry and Janice Perry were donors and noted, “Both of us as a couple figured it was an opportunity to give something back.”

Perry was impressed with the new building. He worked at GE Plastics and is retired chairman of Engelhard Corp. The atrium and lobby carries the Perry name.

Plastics Engineering professor and department chair Bob Malloy was beaming all day while showing off many of the new features on the first floor. There was a Gloucester Engineering blown film extruder that they had not been able to find a tall enough ceiling to fit previously. He noted that extruder will allow for research on biodegradable films.

The extruder was nestled inside a High Bay Manufacturing Center that contains a 5-ton overhead crane and will enable research and development in injection molding and extrusion. It is named for UML plastics engineering alumnus Mark Saab and his wife Elisia, who own Advance Polymers Inc. in Salem, N.H., and live in Lowell.

Other machinery in the High Bay included an Arburg 110-ton all-rounder and a Sumitomo Demag c110 to support the compounding lab.

A Technovell twin-screw extruder was particularly intriguing, according to Malloy.

“Most have top speeds of 600 to 1,200 rpms and that affects mixing. This extruder has 4,500 rpms,” said Malloy, noting that it could be used in compounding material for an implantable medical product.

Dri-Air Industries President Charlie Sears was checking out his company’s room and noted it was important way to provide students with the latest information and innovations. He does visit for talks a few times a year.

The entire second floor is a nanotechnology research and development center. It is named after William J. Kennedy, the late brother of alumnus John F. Kennedy, the retired president and CEO of Nova Analytics Corp.

Joey Mead, co-director of the Nanotechnology Center, said that options are wide open, ranging from extrusion of polymers and nano fillers to developing 3-D nano-structures. Students can do research and companies can also find a place to get research done.

She said that a driving force in developing the center was to build on research of nanotechnology. The second floor is loaded with equipment such as a raman spectrometer, an atomic force microscope and various measuring devices. It also has a dip-pen nanolithography instrument, and a unique Chasm Technologies roll-to-roll nanoscale patterning tool.

There also is a biomedical materials development lab that will bridge medicine, biology and engineering. It is named after chemical engineering alumnus Robert Ward and his wife Gail. Ward is the chairman of Emergence Venture Partners LLC, a Berkeley, Calif.-based venture capital company that develops biomaterials for medical devices.

The ETIC building overlaps a variety of disciplines but its goal is to provide the innovation for the future.


Comments

UMass Lowell debuts tech center

By Frank Antosiewicz
Correspondent

Published: October 12, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Baxter investing $300 million to expand dialyzers production in Alabama

August 29, 2014 12:53 pm ET

Baxter International, Inc. is expanding its Opelika, Ala. manufacturing location to boost production of dialyzers, a key component of hemodialysis...    More

Image

Obituary: Jerry Williams, Prism Plastics co-owner

August 29, 2014 8:50 am ET

Williams founded Prism Plastics with Rod Bricker and Gerry Phillips, after the three left Huron Plastics Group in 1999.    More

Polish injection molder Teknorubber up for sale

August 29, 2014 9:14 am ET

Polish plastic parts maker Teknorubber has been put up for sale following its insolvency filing in March 2014. The company is to be auctioned through ...    More

Image

Concours adding equipment as mold making business booms in Mexico

August 28, 2014 2:05 pm ET

Concours Mold Inc. is heading for a 50 percent increase in sales in Mexico this year after a $4 million upgrade of its plant in Huejotzingo, in the...    More

Image

Canadian mold maker Thibault adding to new operation in Mexico

August 27, 2014 3:19 pm ET

Canadian mold maker I Thibault Inc has purchased an established Mexican company, Tecnimoldes SA de CV, for a seven-figure-dollar-sum and renamed it Ti...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events