UMass Lowell debuts tech center

By Frank Antosiewicz
Correspondent

Published: October 12, 2012 6:00 am ET

Professor Bob Malloy shows off a Technovell twin-screw extruder in UMass Lowell’s new Emerging Technologies and Innovation Center. (Plastics News photo by Frank Antosiewicz)

Related to this story

Topics Injection Molding, Molds/Tooling

LOWELL, MASS. (Oct. 12, 1:45 p.m. ET)  — For UMass Lowell’s academic community and assorted guests like Gov. Deval Patrick, the Oct. 11 unveiling of its new $80 million, 84,000-square-foot Emerging Technologies and Innovation Center was a reason for the school band to play and signal the start of a new era.

“The importance of what we are trying to do here in Massachusetts warrants the investment. We must have opportunities for the young and those not so young,” said Gov. Patrick, during festivities attended by more than 400 people.

The four-story facility stood in the background adorned with the slogan “Where ingenuity meets industry.” Among its goals are to serve as a research and academic facility, a hub for developing advanced manufacturing, fostering industry partnerships and building on research in polymers, nano­technology, optics and molecular biology.

“ETIC will foster new innovations and new technologies. This is an exciting day for the university,” said Marty Meehan, chancellor of the University of Massachusetts Lowell.

The new building contains 18 laboratories, 23 offices, four conference rooms and clean rooms designated as Class 100, 1,000 and 10,000. A large chunk of its funding — $35 million — came from the Massachusetts Economic Investment Act of 2006. It did receive other state and federal funding as well as $7 million in donations from individuals and industry.

Current students and alumni alike were pleased with the new surroundings.

“It’s nice. The other labs were accumulated over time. They were not as organized … but here it’s nice that everything is where it needs to be,” said Kylie Speir, a doctoral student.

Barry and Janice Perry were donors and noted, “Both of us as a couple figured it was an opportunity to give something back.”

Perry was impressed with the new building. He worked at GE Plastics and is retired chairman of Engelhard Corp. The atrium and lobby carries the Perry name.

Plastics Engineering professor and department chair Bob Malloy was beaming all day while showing off many of the new features on the first floor. There was a Gloucester Engineering blown film extruder that they had not been able to find a tall enough ceiling to fit previously. He noted that extruder will allow for research on biodegradable films.

The extruder was nestled inside a High Bay Manufacturing Center that contains a 5-ton overhead crane and will enable research and development in injection molding and extrusion. It is named for UML plastics engineering alumnus Mark Saab and his wife Elisia, who own Advance Polymers Inc. in Salem, N.H., and live in Lowell.

Other machinery in the High Bay included an Arburg 110-ton all-rounder and a Sumitomo Demag c110 to support the compounding lab.

A Technovell twin-screw extruder was particularly intriguing, according to Malloy.

“Most have top speeds of 600 to 1,200 rpms and that affects mixing. This extruder has 4,500 rpms,” said Malloy, noting that it could be used in compounding material for an implantable medical product.

Dri-Air Industries President Charlie Sears was checking out his company’s room and noted it was important way to provide students with the latest information and innovations. He does visit for talks a few times a year.

The entire second floor is a nanotechnology research and development center. It is named after William J. Kennedy, the late brother of alumnus John F. Kennedy, the retired president and CEO of Nova Analytics Corp.

Joey Mead, co-director of the Nanotechnology Center, said that options are wide open, ranging from extrusion of polymers and nano fillers to developing 3-D nano-structures. Students can do research and companies can also find a place to get research done.

She said that a driving force in developing the center was to build on research of nanotechnology. The second floor is loaded with equipment such as a raman spectrometer, an atomic force microscope and various measuring devices. It also has a dip-pen nanolithography instrument, and a unique Chasm Technologies roll-to-roll nanoscale patterning tool.

There also is a biomedical materials development lab that will bridge medicine, biology and engineering. It is named after chemical engineering alumnus Robert Ward and his wife Gail. Ward is the chairman of Emergence Venture Partners LLC, a Berkeley, Calif.-based venture capital company that develops biomaterials for medical devices.

The ETIC building overlaps a variety of disciplines but its goal is to provide the innovation for the future.


Comments

UMass Lowell debuts tech center

By Frank Antosiewicz
Correspondent

Published: October 12, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Small is beautiful in Nissei's newest press

November 21, 2014 2:14 pm ET

Responding to customer demand for flexibility, Japanese plastics-equipment manufacturer Nissei Plastic Industrial Co. Ltd. is demoing a caster-...    More

Image

Three advancements have driven injection molding technology

November 21, 2014 6:00 am ET

Injection molding technology has made major advances in the last 25 years, from largely a world of shoot-and-ship to doing as much as possible at the ...    More

Image

Netstal, Electra Form team up for PET preform partnership

November 20, 2014 3:15 pm ET

The Netstal division of Krauss-Maffei Corp. is teaming up with Electra Form Industries in a partnership to offer PET preform machines and molds as a...    More

Image

Thomson Plastics opens N.C. plant

November 20, 2014 3:12 pm ET

Custom injection molder Thomson Plastics Inc. has opened a new manufacturing facility in Lexington, N.C.    More

Image

Molder Carclo expands in China, chasing medical growth

November 19, 2014 3:44 pm ET

U.K.-based injection molder Carclo plc is “significantly” expanding its Chinese medical manufacturing capacity with a new factory, as the ...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events