Nyloboard preparing for busy 2013

Mike Verespej

Published: October 12, 2012 6:00 am ET

Related to this story

Topics Construction, Sustainability, Materials, Pipe/Profile/Tubing, Recycling, Suppliers

BALTIMORE (Oct. 12, 1:30 p.m. ET) — After several stops and starts and changes in top management, building materials manufacturer NyloBoard LLC is ready to sell its decking made from recycled carpet fiber.

“We’re fully prepared to take orders for delivery later this year,” said Doug Morse, who joined the Covington, Ga., company one year ago as president and chief operating officer. “We have enough capacity to make a dent in the high-end premium segment of the deck market.”

Unlike promises that previous top management had made, Morse said everything is now in order to launch a product that he believes has market leverage because it has no wood in it, making it naturally resistant to water, mold, mildew and termites.

The decking is made from loose-fill carpet and bonding resins that are free from volatile organic compounds, the company said.

“It looks and feels like wood,” Morse said in an interview at Deck Expo, held Oct. 10-12 in Baltimore, where the company announced that its non-composite NyloDeck is now available. “We take carpet fiber, prepare it, then use a proprietary resin formulation and make the end product on custom-build equipment.

“There is absolutely positively no corporate inertia to overcome to be successful,” he said. “This is ours to win.

“This management team will be the one here until there’s an IPO [initial public offering],” said Morse, a former metals industry executive. “It is an exciting product with a unique manufacturing process. This is not made like any other deck board out there. I haven’t had this much fun in 20 years.”

Morse declined to project sales for 2013 or market share potential. “But we believe we have a significant opportunity” in the marketplace, he said. “And we have the potential to double capacity as early as the middle of next year.”

The company employs about 25 at the company’s headquarters and 200,000 square foot plant in Covington, outside Atlanta, Morse said. “By the end of 2013, we expect to be eight-fold bigger as we ramp out.”

“Obviously it’s a very crowded space we’re entering,” said Craig Jacks, who joined the company as vice president of sales and marketing in April. “But the entire segment is growing and we think we bring something that is better.”

“The challenge we face is obviously production differentiation, building the brand awareness and getting the product into various channels,” added Morse.

He said NyloDeck has the “lowest coefficient” of any deck board for both thermal expansion and contraction in hot or cold temperatures.

“We call it the ‘non-composite’ composite deck board, because unlike virtually every other option available, NyloDeck contains no wood or PVC and it isn’t a cap stock product that can be easily compromised,” Morse said. “It is impervious to moisture, rotting, termites, mold and mildew and possesses excellent strength, durability and performance qualities.”

Morse said the company is still in the process of adding dealers and distributors, but that its initial sales focus with be the Northeast and Southeast.

A year ago at Deck Expo, the previous management team also had said that it had hoped to roll out NyloDeck in 2012.

But more time was needed, explained Jacks, for “extensive testing and product development” to make sure it was “ready to go.”

“The manufacturing process has gone through a rate rigorous review,” Morse said. “We have added pieces of carpet fiber handling equipment to improve volumes, drive out costs and improve yields. And we have added Six Sigma mechanisms to have a data-driven approach and reduce manpower” needed to make the product.

The 8-year-old company shifted into decking products four years ago when there was a dramatic drop in demand of more than 90 percent for its marine products — 8-by-20 foot sheets — that were used for hulls and to make cabinets on yachts because of their water-resistance and lightweight nature.

NyloDeck can be installed with conventional building tools and performs much like wood products in finishing and fabrication. It has an ease of installation because the mounting system is the structural system it will be attached to — whether that is metal, steel, or wood — and the fiber in the product provides the strength and adhesion to hold the screw.

NyloDeck is available in five colors: Saddle Rose, Harbor Gray, Newport White, Desert Spice and Mountain Mocha and comes with a 25-year limited warranty.

In addition to decking, Nyloboard also makes NyloTrim and NyloSheet. The company has received AC 174 certification for deck boards, guards and handrails from ICC Evaluation Services, a subsidiary of the International Code Council.


Comments

Nyloboard preparing for busy 2013

Mike Verespej

Published: October 12, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Audacious vandal stuns Taipei Plas

September 29, 2014 4:59 pm ET

Melodrama erupted at the traditionally tranquil Taipei Plas trade show on Sept. 28 when a mysterious intruder flung red paint at the Baumüller...    More

Image

Asahi Kasei breaks ground on Alabama compounding plant

September 29, 2014 5:39 pm ET

Asahi Kasei Plastics North America will be able to solve two problems at once with a new compounding plant in Athens, Ala.    More

Image

Shini pushes into western China

September 29, 2014 4:28 pm ET

Despite intellectual-property brigands, Taiwan's Shini Plastics Technologies Inc. is zestfully pursuing the enormous Chinese market for plastics...    More

Image

EEOC suing movable wall maker Hufcor

September 29, 2014 3:09 pm ET

Movable wall and partition maker Hufcor Inc. is facing a federal lawsuit from the U.S. Equal Employment Opportunity Commission after violating...    More

Image

DuPont shifting Teflon production in China

September 29, 2014 2:35 pm ET

DuPont Co. will spend more than $15 million to improve its fluoropolymer product offerings in China.    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events