Nyloboard preparing for busy 2013

Mike Verespej

Published: October 12, 2012 6:00 am ET

Related to this story

Topics Materials Suppliers Sustainability Construction Pipe/Profile/Tubing Recycling
Companies & Associations

BALTIMORE (Oct. 12, 1:30 p.m. ET) — After several stops and starts and changes in top management, building materials manufacturer NyloBoard LLC is ready to sell its decking made from recycled carpet fiber.

“We’re fully prepared to take orders for delivery later this year,” said Doug Morse, who joined the Covington, Ga., company one year ago as president and chief operating officer. “We have enough capacity to make a dent in the high-end premium segment of the deck market.”

Unlike promises that previous top management had made, Morse said everything is now in order to launch a product that he believes has market leverage because it has no wood in it, making it naturally resistant to water, mold, mildew and termites.

The decking is made from loose-fill carpet and bonding resins that are free from volatile organic compounds, the company said.

“It looks and feels like wood,” Morse said in an interview at Deck Expo, held Oct. 10-12 in Baltimore, where the company announced that its non-composite NyloDeck is now available. “We take carpet fiber, prepare it, then use a proprietary resin formulation and make the end product on custom-build equipment.

“There is absolutely positively no corporate inertia to overcome to be successful,” he said. “This is ours to win.

“This management team will be the one here until there’s an IPO [initial public offering],” said Morse, a former metals industry executive. “It is an exciting product with a unique manufacturing process. This is not made like any other deck board out there. I haven’t had this much fun in 20 years.”

Morse declined to project sales for 2013 or market share potential. “But we believe we have a significant opportunity” in the marketplace, he said. “And we have the potential to double capacity as early as the middle of next year.”

The company employs about 25 at the company’s headquarters and 200,000 square foot plant in Covington, outside Atlanta, Morse said. “By the end of 2013, we expect to be eight-fold bigger as we ramp out.”

“Obviously it’s a very crowded space we’re entering,” said Craig Jacks, who joined the company as vice president of sales and marketing in April. “But the entire segment is growing and we think we bring something that is better.”

“The challenge we face is obviously production differentiation, building the brand awareness and getting the product into various channels,” added Morse.

He said NyloDeck has the “lowest coefficient” of any deck board for both thermal expansion and contraction in hot or cold temperatures.

“We call it the ‘non-composite’ composite deck board, because unlike virtually every other option available, NyloDeck contains no wood or PVC and it isn’t a cap stock product that can be easily compromised,” Morse said. “It is impervious to moisture, rotting, termites, mold and mildew and possesses excellent strength, durability and performance qualities.”

Morse said the company is still in the process of adding dealers and distributors, but that its initial sales focus with be the Northeast and Southeast.

A year ago at Deck Expo, the previous management team also had said that it had hoped to roll out NyloDeck in 2012.

But more time was needed, explained Jacks, for “extensive testing and product development” to make sure it was “ready to go.”

“The manufacturing process has gone through a rate rigorous review,” Morse said. “We have added pieces of carpet fiber handling equipment to improve volumes, drive out costs and improve yields. And we have added Six Sigma mechanisms to have a data-driven approach and reduce manpower” needed to make the product.

The 8-year-old company shifted into decking products four years ago when there was a dramatic drop in demand of more than 90 percent for its marine products — 8-by-20 foot sheets — that were used for hulls and to make cabinets on yachts because of their water-resistance and lightweight nature.

NyloDeck can be installed with conventional building tools and performs much like wood products in finishing and fabrication. It has an ease of installation because the mounting system is the structural system it will be attached to — whether that is metal, steel, or wood — and the fiber in the product provides the strength and adhesion to hold the screw.

NyloDeck is available in five colors: Saddle Rose, Harbor Gray, Newport White, Desert Spice and Mountain Mocha and comes with a 25-year limited warranty.

In addition to decking, Nyloboard also makes NyloTrim and NyloSheet. The company has received AC 174 certification for deck boards, guards and handrails from ICC Evaluation Services, a subsidiary of the International Code Council.


Comments

Nyloboard preparing for busy 2013

Mike Verespej

Published: October 12, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Ford moving forward in carbon fiber for 'high volume' use

April 17, 2015 10:21 am ET

Ford Motor Co. has signed a deal with a carbon-fiber manufacturer to jointly explore “high-volume” automotive uses for the lightweight...    More

Image

Force majeure declared at six European sites since mid-March

April 17, 2015 1:10 pm ET

At least six European resin makers have declared force majeure on polyethylene, polypropylene and related products since mid-March, leading to higher ...    More

Image

Executives step down from Star Thermoplastics

April 17, 2015 12:56 pm ET

Executives Randall Fortin and Larry Johnson no longer are with materials firm Star Thermoplastics Alloys & Rubbers Inc.    More

Image

Zoltek expanding CF capacity in Europe

April 17, 2015 10:12 am ET

Leading carbon fiber group Zoltek Corp. has signed a strategic agreement with the Hungarian government to expand its operation in northern Hungary,...    More

Image

Hanwha Azdel adds capacity in Lynchburg

April 16, 2015 2:01 pm ET

Composite maker Hanwha Azdel Inc. will add space and a new production line at its Lynchburg, Va., production facility, the company announced April 16.    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 15, 2015 - September 17, 2015Plastics Caps & Closures - September 2015

More Events