PETRA proposes new way to judge materials' recyclability

Mike Verespej

Published: October 16, 2012 6:00 am ET

Related to this story

Topics Sustainability, Public Policy, Materials, Recycling, Design

NEW YORK (Oct. 16, 12:15 p.m. ET) — To overcome recycling test barriers that discourage improvements in PET resin, the PET Resin Association has developed a recyclability assessment model that it said is a more “realistic and effective method for assessing recyclability” of various types of PET resin than the guidelines from the Association of Postconsumer Plastic Recyclers.

The PETRA model integrates the need for continued innovation with stringent resin testing and monitoring, said Ralph Vasami, executive director of PETRA, which represents North American producers of PET resin.

The group announced its Recyclability and Innovation Model and posted it online Oct. 16. The document provides voluntary criteria for testing, evaluating and ensuring the recyclability of newly developed PET resins that are used in manufacturing PET bottles and containers.

New York-based PETRA said it issued the model when “it became apparent” — three years after discussions between the two organizations became in 2009 — “that APR was unwilling to change its protocol to allow for the introduction of resin variations anticipated for relatively low market presence, even if offset by additional recyclability safeguards.”

The PETRA model allows for testing variations at levels of 2 percent and 10 percent, which PETRA said encompasses the vast majority of today’s new PET resin variants. 

Current recyclability guidelines in the PET Bottle Critical Guidance document from the Association of Postconsumer Plastic Recyclers call for resin testing at concentrations of either 25 percent or 50 percent. The European PET Bottle Platform PET Recycling Test Protocol allows for testing at lower concentrations than APR.

“APR requires resin variants and innovations typically having a low market presence to meet the same requirements of a resin accounting for 25 percent or 50 percent of total North American PET production,” said PETRA.

Those requirements discourage innovation, make product differentiation difficult and preclude the introduction of resin improvements, PETRA said.

“In recent years, the APR’s focus on defining recyclability in terms of meeting the capabilities of the least-sophisticated recycling operations has been increasingly at odds with advances in resin science and resulting innovations.”

PETRA’s model focuses on real-market resin performance and the evaluation needs of producers, brand owners and recyclers, said Vasami.

In addition to special-use resins, PETRA’s model does include criteria for testing at those more robust levels of 25 percent and 50 percent.

In general, PETRA said its model is designed to combine the most progressive elements of the existing European PET Bottle Platform recyclability guidelines and the APR recycling guidelines for North America — without sacrificing rigorous testing benchmarks or compromising innovation.

PETRA stressed that under its model all innovations will be tested to the same performance criteria and given either a pass or fail mark.

According to PETRA, its model includes:

* A rigorous test protocol to measure recyclability in terms of a resin’s physical and chemical performance characteristics.

* A dispersion assessment, based on the test protocol results, that calculates the volume of a resin type that can safely be placed in the marketplace without compromising the overall recyclability of PET.

* The provision of control resins that reflect the current North American supply of water-grade and carbonated soft drink-grade PET resins, for use with the test protocol.

* Annual test monitoring — once the model is in prevalent use — of the combined virgin PET stream to identify and quantify any changes in the virgin resin stream that might adversely impact the recyclability of PET.

Under the program, PETRA will provide industry-representative control resins to organizations that use the model for testing. Once the model is widely used, PETRA said it will be committed to funding annual third-party testing and monitoring of the PET resin stream.


Comments

PETRA proposes new way to judge materials' recyclability

Mike Verespej

Published: October 16, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Polypropylene prices rise, while PE and PS fall

February 26, 2015 4:01 pm ET

North American prices for polyethylene and polystyrene resins continued to fall in February, while regional prices for polypropylene showed a...    More

Image

Price and sustainability both key to success for carpet recycler

February 26, 2015 1:28 pm ET

DALLAS — A green message will get you in the door, but ultimately that sustainability message has to be backed up with quality at the right...    More

Image

Silicone baby teether company working with Michigan recycler

February 26, 2015 1:14 pm ET

A recycling company and a startup will try to keep silicone baby products out of landfill.    More

Image

3i to sell specialty chemicals company Azelis to Apax Partners

February 26, 2015 11:36 am ET

Azelis Holding SA, the specialty chemicals distributor, is being sold by its private equity owners 3i Group plc to another private investment outfit, ...    More

Image

Expert says more action needed to solve ocean plastics problem

February 25, 2015 5:59 pm ET

DALLAS — Private companies are going to have to step up to the plate and open their wallets if the world ever wants to solve the growing problem...    More

Market Reports

Flexible Packaging Trends in North America

North America represents about 30 percent of the global consumption of flexible packaging. Annual growth in this region is forecast at 4 percent during the next 5 years.

For more insight on growth opportunities, drivers of growth and the outlook for 2015, download this report.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events