Mengel outlines latest thermoforming fundamentals

By Bill Bregar
Senior Staff Reporter

Published: October 16, 2012 6:00 am ET

Related to this story

Topics Packaging, Film & Sheet, Thermoforming

GRAND RAPIDS, MICH. (Oct. 16, 10:25 a.m. ET) — The U.S. thermoforming industry is financially solid and enjoys a stable workforce, but needs capital investment to replace older equipment, said Jeff Mengel, a partner with Plante & Moran in Chicago.

The average age of a thermoforming press is 14 years old, Mengel said at the Society of Plastics Engineers Thermoforming Conference.

“So we have a lot of older stock and we’re just sitting on it,” he said. Mengel said he thinks companies will by new equipment as the economy recovers.

Mengel delivered results of Plante & Moran’s survey of thermoformers Sept. 24 at the Grand Rapids conference. The firm contacted 20 thermoformers, representing 30 different plant locations, a fairly small sample. Participants were broken down into four size categories, by annual sales: $13 million and smaller, $13 million to $18 million, $18 million to $45 million and more than $45 million. Mengel looked at the packaging and industrial forming segments.

On the financial side, thermoforming compares favorably with other types of plastics processes, especially, Mengel said, in value added per labor dollar. That number is reached by subtracting material costs from sales, then dividing that total by labor. Value added per labor dollar is $2.08 for the lowest 25 percent of thermoformers, meaning that for every dollar of labor, they see a return of $2.08. Value added per labor dollar is $2.42 for the median and $2.96 for the largest 25 percent of formers.

Another important metric is EBITOC, or earnings before interest, taxes and owner’s compensation — measured as a percent of sales. Mengel said thermoforming looks good here for the larger players: 7.1 percent for smaller companies, 8 percent for the median and 11.5 percent for the upper 25 percent.

Mengel said that for the automotive industry, EBITOC ranges from just 2 percent to 11 percent.

The numbers show that the thermoforming sector is more equitable and much less harsh than the automotive industry, which tends to punish weaker suppliers and reward stronger ones, he said.

Thermoformers in the survey have low employee turnover, just 5 percent for smaller companies, 9 percent for the median and 15 percent for larger formers. Even 15 percent is low, he said.

Mengel cited several causes for the workforce stability. Processors were more selective in hiring because of the slow economy. And the housing collapse means people aren’t selling their houses for a move, because of the risk of losing money.

“One of the things that’s driving the low turnover right now is the fact that the housing market inhibits the flow of labor,” Mengel said.

An area of weakness for the smaller companies is a negative two-year rate of sales growth, which has driven some consolidation, Mengel said. By contrast, for the upper 25 percent, sales have increased 7.8 percent over the last two-year period.

Mengel said labor and material account for 75 percent of the cost of thermoforming a part. He pointed out that the recession proved labor costs are not fixed — because companies could freeze or cut wages. “Labor is the largest controllable cost you have,” he said.

Highly successful companies had more automation and lower labor costs, he added.


Comments

Mengel outlines latest thermoforming fundamentals

By Bill Bregar
Senior Staff Reporter

Published: October 16, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

French investment firm buys Alabama-based CSP Technologies

January 30, 2015 1:10 pm ET

A French investment firm has finalized a deal to buy CSP Technologies Inc., an Auburn, Ala., company that makes specialty plastics packaging.    More

Image

Report: Brands are falling short on packaging sustainability

January 29, 2015 5:19 pm ET

Packaging in general, and plastic packaging in particular, has a long way to go in terms of recycling, according to a pair of environmental groups.    More

Image

Lund adds to aftermarket auto products portfolio with buy of Bushwacker

January 29, 2015 2:49 pm ET

Lund International Inc. has expanded its portfolio of plastic aftermarket vehicle accessories by acquiring Bushwacker Inc.    More

Image

Profit dips at Bemis Co. Inc.

January 29, 2015 2:04 pm ET

Profit dipped for Bemis Co. Inc. for all of 2014, but were up during the fourth quarter in what the company's leader called a “pivotal year....    More

Image

Falcon Plastics expands in South Dakota

January 29, 2015 11:45 am ET

Falcon Plastics Inc. is putting the final touches on a 60,000 square foot addition that will nearly double the size of its Brookings, S.D., manufactur...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events