Thai processors urged to look to ASEAN for growth

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: October 19, 2012 6:00 am ET

Related to this story

Topics Public Policy, Materials, Suppliers

BANGKOK (Oct. 19, 3:45 a.m. ET) — Thailand's plastics processing industry, the largest in Southeast Asia, should look for closer economic integration with its neighbors as a "new model of sustained growth" to broaden beyond traditional export markets and cope with a slower world economy, industry officials said at a recent conference.

Speaking at the Flexpo Bangkok conference, held Sept. 17-19 in Bangkok, Thai industry officials said that overall the country's plastics product sector grew last year to 255 billion Baht (US$8.3 billion), up from about 225 billion Baht ($7.3 billion) in 2010.

But that was still below the roughly 280 billion Baht (US$ 9.1 billion) in revenues the sector had in 2007, before the global financial crisis, according to figures from the Petroleum Institute of Thailand given at the conference.

That prompted some officials to suggest that a full recovery should look more to the 10-member Association of Southeast Asian Nations and its rapid urbanization and expanding middle class.

By 2015, those 10 countries expect to launch the ASEAN Economic Community and create a single market among their 600 million people.

"In 2015, we think ASEAN will be a very solid framework for a new model of sustained growth for the ASEAN countries," said Siri Jirapongphan, executive director of the Bangkok-based Petroleum Institute of Thailand. "Our industrial members are focusing their further development and growth in this region."

The top four export markets for Thailand’s plastics processing industry in 2011 were Japan, the United States, China, and Australia, and they will remain important, Jiripongphan and others said.

But with the middle class in ASEAN expected to grow from 24 percent of the population now to 65 percent by 2030, and an urbanization rate that is projected to grow from 42 percent ASEAN-wide now to 50 percent by 2025, regional opportunities are rising, said Petch Niyomsen, polyolefins strategy and planning manager with Bangkok-based SCG Chemicals.

"There's a huge potential for us to capture, if we can develop the right strategy in those countries," said Chaya Chandavasu, vice president, science and innovation department, PTT Global Chemical Ltd.  "It will be very useful to build a stronger plastics industry in the region."

He said the AEC will make it easier for both labor and production to flow across the 10 member countries and create a single market.

Still, Thai manufacturing is overwhelmingly export focused, with just 22 percent of its output going to its domestic market, Niyomsen said. Thailand is ASEAN’s largest maker of both autos and electronics, with large assembly plants for American and Japanese car makers.

In spite of that industrial base, figures from the Petroleum Institute suggest that Thailand's plastics processing sector has lost some ground to neighboring Malaysia, which edged past Thailand in 2011 to be ASEAN‘s top plastic products exporter.

Part of that slip in ranking was from disruptions to supply chains caused by court rulings delaying expansion of the Map Ta Phut Industrial Estate, the country’s largest petrochemical park, said Khunying Thongtip Ratanarat, a board member of the Bangkok-based Petroleum Institute of Thailand Foundation. Those court rulings came after environmental lawsuits against pollution halted the expansions.

"The growth in the last five years or so in the conversion industry has slowed down a bit because of political instability," she said, referring to the court cases. "It's nothing much that serious but certainly while we were stagnating, Malaysia was taking that opportunity."

Jirapongphan and other PIT officials at Flexpo said the industry faces other challenges, such as not spending enough on research and development and sometimes lacking scale to be more competitive globally.

He said that many Thai companies generally spend less than 0.5 percent of revenues on R&D, when they should be spending 2-3 percent.

"We used to think we have cheap labor," he said. "We are now focusing more on building local manpower competencies."


Comments

Thai processors urged to look to ASEAN for growth

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: October 19, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

2014 leaves some resin firms in the black while others struggle

January 23, 2015 2:37 pm ET

On the financial side, 2014 was good for Hexcel Corp., so-so for Celanese Corp. and it could have been better for Omnova Solutions.    More

Image

Berry's rebranded Blue Clover expands packaging design reach

January 23, 2015 1:59 pm ET

As design director of Berry Plastics Corp.'s rebranded packaging design studio, Scott Fisher believes the new name of Blue Clover Studios cuts the...    More

Image

Clariant's ColorForward predicts future consumer trends

January 23, 2015 1:33 pm ET

Clariant International Ltd. is marking a decade of color forecasting with the 10th edition of its ColorForward program.    More

Image

The future for PolyOne is colorful

January 23, 2015 1:28 pm ET

PolyOne Corp. is writing four color stories for 2016.    More

Plastics executive pleads guilty in federal firearm case

January 23, 2015 12:37 pm ET

Richard Cummings, 43, a former manager at Tri Town Precision Plastics Inc. in Deep River, Conn., has pleaded guilty to violating federal firearms laws...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events