Thai processors urged to look to ASEAN for growth

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: October 19, 2012 6:00 am ET

Related to this story

Topics Public Policy, Materials, Suppliers

BANGKOK (Oct. 19, 3:45 a.m. ET) — Thailand's plastics processing industry, the largest in Southeast Asia, should look for closer economic integration with its neighbors as a "new model of sustained growth" to broaden beyond traditional export markets and cope with a slower world economy, industry officials said at a recent conference.

Speaking at the Flexpo Bangkok conference, held Sept. 17-19 in Bangkok, Thai industry officials said that overall the country's plastics product sector grew last year to 255 billion Baht (US$8.3 billion), up from about 225 billion Baht ($7.3 billion) in 2010.

But that was still below the roughly 280 billion Baht (US$ 9.1 billion) in revenues the sector had in 2007, before the global financial crisis, according to figures from the Petroleum Institute of Thailand given at the conference.

That prompted some officials to suggest that a full recovery should look more to the 10-member Association of Southeast Asian Nations and its rapid urbanization and expanding middle class.

By 2015, those 10 countries expect to launch the ASEAN Economic Community and create a single market among their 600 million people.

"In 2015, we think ASEAN will be a very solid framework for a new model of sustained growth for the ASEAN countries," said Siri Jirapongphan, executive director of the Bangkok-based Petroleum Institute of Thailand. "Our industrial members are focusing their further development and growth in this region."

The top four export markets for Thailand’s plastics processing industry in 2011 were Japan, the United States, China, and Australia, and they will remain important, Jiripongphan and others said.

But with the middle class in ASEAN expected to grow from 24 percent of the population now to 65 percent by 2030, and an urbanization rate that is projected to grow from 42 percent ASEAN-wide now to 50 percent by 2025, regional opportunities are rising, said Petch Niyomsen, polyolefins strategy and planning manager with Bangkok-based SCG Chemicals.

"There's a huge potential for us to capture, if we can develop the right strategy in those countries," said Chaya Chandavasu, vice president, science and innovation department, PTT Global Chemical Ltd.  "It will be very useful to build a stronger plastics industry in the region."

He said the AEC will make it easier for both labor and production to flow across the 10 member countries and create a single market.

Still, Thai manufacturing is overwhelmingly export focused, with just 22 percent of its output going to its domestic market, Niyomsen said. Thailand is ASEAN’s largest maker of both autos and electronics, with large assembly plants for American and Japanese car makers.

In spite of that industrial base, figures from the Petroleum Institute suggest that Thailand's plastics processing sector has lost some ground to neighboring Malaysia, which edged past Thailand in 2011 to be ASEAN‘s top plastic products exporter.

Part of that slip in ranking was from disruptions to supply chains caused by court rulings delaying expansion of the Map Ta Phut Industrial Estate, the country’s largest petrochemical park, said Khunying Thongtip Ratanarat, a board member of the Bangkok-based Petroleum Institute of Thailand Foundation. Those court rulings came after environmental lawsuits against pollution halted the expansions.

"The growth in the last five years or so in the conversion industry has slowed down a bit because of political instability," she said, referring to the court cases. "It's nothing much that serious but certainly while we were stagnating, Malaysia was taking that opportunity."

Jirapongphan and other PIT officials at Flexpo said the industry faces other challenges, such as not spending enough on research and development and sometimes lacking scale to be more competitive globally.

He said that many Thai companies generally spend less than 0.5 percent of revenues on R&D, when they should be spending 2-3 percent.

"We used to think we have cheap labor," he said. "We are now focusing more on building local manpower competencies."


Comments

Thai processors urged to look to ASEAN for growth

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: October 19, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Residents ask court to close pipe maker

November 21, 2014 3:22 pm ET

Residents living by National Pipe & Plastics Inc.'s new factory in an industrial zone of Endicott, N.Y., say the facility has “devastated the...    More

Image

Small is beautiful in Nissei's newest press

November 21, 2014 2:14 pm ET

Responding to customer demand for flexibility, Japanese plastics-equipment manufacturer Nissei Plastic Industrial Co. Ltd. is demoing a caster-...    More

Image

Three advancements have driven injection molding technology

November 21, 2014 6:00 am ET

Injection molding technology has made major advances in the last 25 years, from largely a world of shoot-and-ship to doing as much as possible at the ...    More

Image

Renners leaving Sumitomo (SHI) Demag

November 21, 2014 10:01 am ET

Christian Renners is leaving injection molding press manufacturer Sumitomo (SHI) Demag Plastics Machinery GmbH, the company announced Nov. 21.    More

Image

Dow reaches agreement with Third Point

November 21, 2014 9:11 am ET

Dow Chemical Co. has reached an agreement with the investment firm that has been trying to force the company to sell off some assets.
More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events