Thai processors urged to look to ASEAN for growth

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: October 19, 2012 6:00 am ET

Related to this story

Topics Materials, Public Policy, Suppliers

BANGKOK (Oct. 19, 3:45 a.m. ET) — Thailand's plastics processing industry, the largest in Southeast Asia, should look for closer economic integration with its neighbors as a "new model of sustained growth" to broaden beyond traditional export markets and cope with a slower world economy, industry officials said at a recent conference.

Speaking at the Flexpo Bangkok conference, held Sept. 17-19 in Bangkok, Thai industry officials said that overall the country's plastics product sector grew last year to 255 billion Baht (US$8.3 billion), up from about 225 billion Baht ($7.3 billion) in 2010.

But that was still below the roughly 280 billion Baht (US$ 9.1 billion) in revenues the sector had in 2007, before the global financial crisis, according to figures from the Petroleum Institute of Thailand given at the conference.

That prompted some officials to suggest that a full recovery should look more to the 10-member Association of Southeast Asian Nations and its rapid urbanization and expanding middle class.

By 2015, those 10 countries expect to launch the ASEAN Economic Community and create a single market among their 600 million people.

"In 2015, we think ASEAN will be a very solid framework for a new model of sustained growth for the ASEAN countries," said Siri Jirapongphan, executive director of the Bangkok-based Petroleum Institute of Thailand. "Our industrial members are focusing their further development and growth in this region."

The top four export markets for Thailand’s plastics processing industry in 2011 were Japan, the United States, China, and Australia, and they will remain important, Jiripongphan and others said.

But with the middle class in ASEAN expected to grow from 24 percent of the population now to 65 percent by 2030, and an urbanization rate that is projected to grow from 42 percent ASEAN-wide now to 50 percent by 2025, regional opportunities are rising, said Petch Niyomsen, polyolefins strategy and planning manager with Bangkok-based SCG Chemicals.

"There's a huge potential for us to capture, if we can develop the right strategy in those countries," said Chaya Chandavasu, vice president, science and innovation department, PTT Global Chemical Ltd.  "It will be very useful to build a stronger plastics industry in the region."

He said the AEC will make it easier for both labor and production to flow across the 10 member countries and create a single market.

Still, Thai manufacturing is overwhelmingly export focused, with just 22 percent of its output going to its domestic market, Niyomsen said. Thailand is ASEAN’s largest maker of both autos and electronics, with large assembly plants for American and Japanese car makers.

In spite of that industrial base, figures from the Petroleum Institute suggest that Thailand's plastics processing sector has lost some ground to neighboring Malaysia, which edged past Thailand in 2011 to be ASEAN‘s top plastic products exporter.

Part of that slip in ranking was from disruptions to supply chains caused by court rulings delaying expansion of the Map Ta Phut Industrial Estate, the country’s largest petrochemical park, said Khunying Thongtip Ratanarat, a board member of the Bangkok-based Petroleum Institute of Thailand Foundation. Those court rulings came after environmental lawsuits against pollution halted the expansions.

"The growth in the last five years or so in the conversion industry has slowed down a bit because of political instability," she said, referring to the court cases. "It's nothing much that serious but certainly while we were stagnating, Malaysia was taking that opportunity."

Jirapongphan and other PIT officials at Flexpo said the industry faces other challenges, such as not spending enough on research and development and sometimes lacking scale to be more competitive globally.

He said that many Thai companies generally spend less than 0.5 percent of revenues on R&D, when they should be spending 2-3 percent.

"We used to think we have cheap labor," he said. "We are now focusing more on building local manpower competencies."


Comments

Thai processors urged to look to ASEAN for growth

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: October 19, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Australian firm buys Chemical Market Resources

September 23, 2014 8:42 pm ET

In an international consulting deal, Chemical Market Resources Inc. has been acquired by TZ Minerals International Pty. Ltd. for an undisclosed price.    More

Image

Ewikon, Gammaflux form private-label partnership

September 23, 2014 2:47 pm ET

German hot runner manufacturer Ewikon GmbH is forming a private-label partnership with Gammaflux LP, Ewikon announced at a Technology Day held Sept....    More

Image

PolyOne opens new plant in India

September 23, 2014 3:11 pm ET

North American compounding leader PolyOne Corp. has opened a new plant in Pune, India.    More

Image

Chinese mold makers say they don't worry about reshoring trends

September 23, 2014 12:05 pm ET

Reshoring may be a hot topic in U.S. manufacturing circles, but the mid-level and small players putting in appearances at this year's AsiaMold in...    More

Image

Italy's machine sector seeing growth

September 23, 2014 11:02 am ET

Italy experienced a rise in imports and exports of rubber and plastics equipment in January-June this year, said Assocomaplast, the trade association ...    More

Market Reports

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

Our special market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Economics editor, Bill Wood, forecasts market growth and industry thought leaders offer competitive insight on key issues and trends impacting PP&T processors.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook – North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events