Progress reported on rating energy consumption of injection presses

David Eldridge

Published: October 23, 2012 6:00 am ET

Related to this story

Topics Sustainability, Injection Molding, Machinery

FRIEDRICHSHAFEN, GERMANY (Oct. 23, 10:45 a.m. ET) — A European project to introduce labeling on injection molding machines that gives a rating for their energy consumption has completed the first stages. However it will be at least a year before the labeling system is launched by European machine makers.

The project was started in 2011 by Euromap, the European association representing plastics and rubber machinery manufacturers. It forms part of the plastics industry’s response to the European Commission’s Energy Related Products directive, which seeks to reduce the energy consumption of industrial machinery by 20 percent by 2020.

The project has worked on developing a standard approach to measurement of energy consumption in injection molding machines. This work has now finished, announced VDMA, the German machinery association, at a forum on its Blue Competence energy efficiency program which it held last week during the Fakuma 2012 exhibition in Friedrichshafen.

But before the labeling system is launched, machinery makers are being given time to improve the energy consumption of their product ranges so that they achieve an A rating at the launch.

“Everybody is being given the chance to get into the best classification,” said Karlheinz Bourdon, vice president of technologies at KraussMaffei, who is involved in the project.

Speaking to European Plastics News after the forum, he said there is no fixed timetable, but he hopes an announcement on the labeling system can be made by the time the K2013 exhibition takes place in October next year.

Bourdon said he expects non-European manufacturers of injection molding machines to also take up the energy labeling system after it has been launched. Other Euromap initiatives have been adopted around the world, he said.

Peter Neumann, president and CEO of Engel, said the labeling system should encourage all machine manufacturers to raise standards in energy efficiency.

“With such an initiative, you introduce a ‘push’ into the industry. That’s something I see as very positive,” he told European Plastics News.


Comments

Progress reported on rating energy consumption of injection presses

David Eldridge

Published: October 23, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

German auto supplier Dr. Schneider opens second US plant

April 17, 2014 12:57 pm ET

Dr. Schneider Kunststoffwerke GmbH, a German supplier of plastic interior auto parts, has opened a $29 million manufacturing plant in Russell Springs,...    More

EU moving closer to rules that will reduce plastic bag use by 80 percent

April 17, 2014 10:54 am ET

European Union countries could have to reduce the use of plastic shopping bags by at least 80 percent by 2019 under draft rules backed by the...    More

Negri Bossi's new owners may 'bring significant manufacturing' to US

April 16, 2014 1:09 pm ET

Italian plastics equipment major Negri Bossi may “bring significant manufacturing of injection molding machines back to the United...    More

Image

Polyair rebuilds from Sandy with help from Process Control

April 16, 2014 4:11 pm ET

Hurricane Sandy gutted Polyair Inter Pack Inc.'s Carlstadt, N.J., plant more than a year ago, and Brian Clawson won't soon forget the devastation.    More

Image

Adding flavor to capture sales

April 16, 2014 4:03 pm ET

Water bottles increasingly are designed and molded with filters and infusers to hold fruit, vegetables or herbs to give water a different taste.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events