Progress reported on rating energy consumption of injection presses

David Eldridge

Published: October 23, 2012 6:00 am ET

Related to this story

Topics Sustainability, Injection Molding, Machinery

FRIEDRICHSHAFEN, GERMANY (Oct. 23, 10:45 a.m. ET) — A European project to introduce labeling on injection molding machines that gives a rating for their energy consumption has completed the first stages. However it will be at least a year before the labeling system is launched by European machine makers.

The project was started in 2011 by Euromap, the European association representing plastics and rubber machinery manufacturers. It forms part of the plastics industry’s response to the European Commission’s Energy Related Products directive, which seeks to reduce the energy consumption of industrial machinery by 20 percent by 2020.

The project has worked on developing a standard approach to measurement of energy consumption in injection molding machines. This work has now finished, announced VDMA, the German machinery association, at a forum on its Blue Competence energy efficiency program which it held last week during the Fakuma 2012 exhibition in Friedrichshafen.

But before the labeling system is launched, machinery makers are being given time to improve the energy consumption of their product ranges so that they achieve an A rating at the launch.

“Everybody is being given the chance to get into the best classification,” said Karlheinz Bourdon, vice president of technologies at KraussMaffei, who is involved in the project.

Speaking to European Plastics News after the forum, he said there is no fixed timetable, but he hopes an announcement on the labeling system can be made by the time the K2013 exhibition takes place in October next year.

Bourdon said he expects non-European manufacturers of injection molding machines to also take up the energy labeling system after it has been launched. Other Euromap initiatives have been adopted around the world, he said.

Peter Neumann, president and CEO of Engel, said the labeling system should encourage all machine manufacturers to raise standards in energy efficiency.

“With such an initiative, you introduce a ‘push’ into the industry. That’s something I see as very positive,” he told European Plastics News.


Comments

Progress reported on rating energy consumption of injection presses

David Eldridge

Published: October 23, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Falcon Plastics expands in South Dakota

January 29, 2015 11:45 am ET

Falcon Plastics Inc. is putting the final touches on a 60,000 square foot addition that will nearly double the size of its Brookings, S.D.,...    More

Image

African equity fund invests in Kenya's General Plastics

January 28, 2015 4:24 pm ET

An African investment fund specializing in agriculture has invested in Kenyan packaging firm General Plastics Ltd. to provide funds to expand in the...    More

Image

Plastics help Volt hit new target

January 28, 2015 1:54 pm ET

The 2016 Volt, unveiled at the North American International Auto Show in Detroit in January, features a sportier exterior design — GM calls it...    More

Image

Piovan buys majority stake in Italy's Penta

January 28, 2015 12:04 pm ET

Italian auxiliary equipment company Piovan SpA has acquired a majority stake in the Italian materials handling company Penta srl, based in Poggio...    More

Image

FPI joins curbside recycling group

January 28, 2015 11:47 am ET

Foodservice Packaging Institute is joining the board of the Curbside Value Partnership, a non-profit group that works to improve curbside recycling in...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events