ICS investing in mold texturing

By Rhoda Miel
News Editor

Published: October 30, 2012 6:00 am ET

Doug Jones of ICS Laser Technologies prepares the laser ablation machine for tool texturing. (Plastics News photo by Rhoda Miel)

Related to this story

Topics Molds/Tooling

WINDSOR, ONTARIO (Oct. 30, 3:30 p.m. ET)  — A small Windsor shop is home to what it believes is the new wave of mold texturing.

The GF AgieCharmilles laser ablation machine at ICS Laser Technologies Inc. is one of only two in Canada and just a handful in North America. But, says ICS President Ian Murray, interest in the technology for mold texturing is growing in Europe and within the global auto industry.

“It’s just a matter of time until this becomes the process of choice,” Murray said.

Laser ablation uses a pulsed, fiber-optic laser to sublimate material, turning it from solid to gas. It has been used in other industries previously, but AgieCharmilles LLC of Lincolnshire, Ill. — part of Swiss company Georg Fischer AG — expanded it to mold making, using five-axis technology and automation to allow users to achieve up to 50 different layers of texture onto a mold. Traditional chemical etching allows only three to five layers.

The additional layers allow for more detail on the texture, while the digital controls ensure repeatable textures on multiple molds. That means companies can produce the same texture on multiple molds made in multiple locations and retain the same grain pattern across multiple parts, said Gisbert Ledvon, business development manager for AgieCharmilles, in a written statement.

“Some manufacturers may think that variation is acceptable between components, but it becomes a much more apparent issue when thinking in terms of complex molds that require multiple inserts,” Ledvon said. “In those instances, differences between the various inserts can result in a visibly inconsistent surface across the part.”

ICS brought in its Laser 1000 5Ax machine from AgieCharmilles during the summer and has been introducing it to customers and fine-tuning its operations.

ICS may seem to be an unlikely toehold for texturing technology in the Detroit and Windsor region. ICS is not a texturing company and it is not a toolmaker. But, Murray notes, the three-man operation has years of experience with laser etching and a reputation as a specialist providing outside services to the region’s mold-making industry.

The firm began as a maker of mold plaques, and now is a laser-etching specialist for finished tools — adding logos and lettering, such as the “air bag” notice on multiple instrument panel molds.

“When I first saw this a year and a half ago, I could see that it was the wave of the future,” Murray said.

ICS is one of the few independent shops in North America offering laser ablation. Texturing specialist Custom Etch Inc. of New Castle, Pa., is another, launching a few months before ICS.

In addition to offering greater detail and more control across multiple molds, Murray noted that laser ablation can more easily mimic real-world textures in its digital brain and replicate that onto steel, aluminum, copper or any other metal mold base. A designer could copy the grain from a favorite leather coat, or the pattern from a wooden plank.

“If you want the look of a stone wall, then just pick your favorite picture of a stone wall,” he said.

The laser treatment also offers reduced environmental concerns compared to chemicals.

There are differences in the preparation time and the production time, however. Uploading the digital data for a laser ablation texturing could take four or five hours, compared to days of preparation for chemical etching, Murray said. The actual chemical process takes less time in actual production, however.

The machine at ICS is limited to a mold weighing less than 1,700 pounds, although AgieCharmilles sells larger machines.

Murray said he expects traditional mold-texturing operations to invest in laser texturing as the technology moves into more mainstream acceptance and more original equipment manufacturers look to use the system and urge more suppliers to invest in lasers.

At that point, he said, ICS will still have the same role in the tooling industry it has always had as an outside support firm, one that will allow it to continue to grow with the technology.


Comments

ICS investing in mold texturing

By Rhoda Miel
News Editor

Published: October 30, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Quick-Start manifolds designed to complement Rheo-Pro hot runners.

December 17, 2014 6:00 am ET

MHS Mold Hotrunner Solutions of Georgetown, Ontario, has introduced the pre-engineered Quick-Start line of hot runner manifolds, designed to...    More

Mold maker I. Thibault plans to invest more capital in Mexico

December 16, 2014 1:03 pm ET

Canadian mold maker I. Thibault Inc. plans to invest more capital in its wholly owned Mexican subsidiary, which it started operating in the summer.    More

Image

Indian mold maker Vasantha sees 'great potential' in Mexico

December 16, 2014 12:52 pm ET

Indian mold maker Vasantha Tool Crafts Pvt. Ltd. has appointed its first sales representative in Mexico, 15-year plastics industry professional Eric...    More

Image

Plastikos, Micro Mold working with local high school

December 15, 2014 6:00 am ET

The companies donated a 60-ton Demag injection press to the school, and Micro Mold’s general manager has worked with the high school's tool...    More

Image

Medical market helps California molder expand

December 9, 2014 9:36 am ET

RIVERSIDE, CALIF. — Custom injection molder Trademark Plastics Inc. is experiencing significant growth in demands from its medical customers.    More

Market Reports

Flexible Packaging Trends in North America

Our latest RESEARCH report examines trends in FLEXIBLE PACKAGING impacting the North American market including a review of economic conditions, key drivers of growth, materials pricing, M&A activity, sustainability challenges and the outlook for 2015.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events