Viper team wins engineering award

By Rhoda Miel
News Editor

Published: October 31, 2012 6:00 am ET

Related to this story

Topics Automotive, Materials, Design

LIVONIA, MICH. (Oct. 31, 4:40 p.m. ET) — Part of the SRT Dodge Viper’s roof line dips down into the rear window glass.

It might look like a quirk of design to set the sports car apart from its competitors. Instead, it’s one small example of how an engineering team from Auburn Hills, Mich.-based Chrysler Group LLC and a handful of suppliers worked together to create a new way to integrate electronics into the car — and also shows why the car won the Vehicle Engineering Team Award from the Society of Plastics Engineers.

The award was one of two announced Oct. 29 in advance of the SPE Automotive Division’s annual Automotive Innovation Awards Gala set for Nov. 7 in Livonia, Mich.

In addition to the VETA team award, SPE selected the 1974 Oldsmobile Toronado and its industry-first driver and passenger airbags as the Hall of Fame winner, which honors an auto plastics product that has been in production for at least 15 years.

Although General Motors Corp. had tested airbags at least a year earlier, the Toronado was the first vehicle available to the public with optional airbags, then called the “air-cushion restraint system.”

Detroit-based GM expanded the optional air bags to some Buick, Oldsmobile and Cadillac sedans later in 1974.

Overall, the Viper provided a breakthrough for increased use of carbon fiber and other composites and thermoplastics as it reduced its overall weight by 100 pounds for the 2013 model year, compared with the previous 2010 Viper, SPE officials noted in an Oct. 29 press release.

The carbon-fiber body panels have received the most attention so far. They are made by Plasan Carbon Composites in Bennington, Vt., and along with reaction injection molded fender systems, composites make up more than 50 percent of the exterior skin. Carbon fiber is used in the hood, roof and lift gate.

In addition to Plasan, other suppliers of materials for the body panels are Toray Carbon Fibers Inc. of Decatur, Ala.; Umeco plc, part of Cytec Industries Inc. of Woodland Park, N.J.; Dow Chemical Co. of Midland, Mich.; and Ashland Inc. of Dublin, Ohio.

The thermoplastic dip into the glass on the lift gate was developed by the engineering teams at Chrysler and suppliers Plasan, Dow, Ashland, A.P. Plasman Corp. of Windsor, Ontario, and Legna Inc. of Warren, Mich., as a new way to position the antenna required for satellite navigation and radio systems.

Since satellite systems became standard options, carmakers have had to find ways to place them on the vehicle exterior without affecting the overall design. That effort has led to black boxes on the roof, antennas disguised in trim to mimic an aerodynamic fin or color-coordinated bumps just above the rear window.

Viper engineers wanted to avoid those familiar tricks and coordinated with its suppliers on the thin “widow’s peak” design on the lift gate. It is housed in an injection molded polycarbonate/ ABS and bonded to a carbon-fiber inner panel.

Other plastic features found on the Viper include:

* An SMC windshield frame using glass and carbon-fiber reinforcement supplied by Quantum Composites Inc. of Bay City, Mich.

* Thermoplastic bumper beams made of a PC/polybutylene tereph­thalate supplied by Sabic Innovative Plastics of Pittsfield, Mass., and molded by NetShape International LLC of Grand Haven, Mich. The bumpers also have a fascia supplied by Romeo RIM Inc. of Romeo, Mich. Romeo RIM also makes the reinforced reaction injection molded polyurethane rear quarter panels and rear appliqué using PU supplied by Pittsburgh-based Bayer MaterialScience LLC.

* A composite trunk pan and rear-end system made by Magna International Inc. of Aurora, Ontario, using an SMC blend from Ashland. The system comprises two composite parts, replacing 15 metal ones on a previous design.

* Novation SpA of Montebelluna, Italy, used a resin transfer molded vinyl ester resin supplied by Novia with a glass-, carbon- and aramid-fiber reinforcement for a seat structure that replaces the previous metal structure, saving 3 pounds per seat. Sabelt SpA is an assembly supplier for the project.

* A thin film transistor overlay is used to create a unique multilayered display for the instrument cluster. Magnetti Marelli SpA of Corbetta, Italy, is the supplier.

* Milan, Italy-based Sogefi SpA injection molds a glass-reinforced polyamide 6 resin from BASF Corp. of Florham Park, N.J., on the Viper’s first composite air-intake manifold, replacing an aluminum manifold.

* An optional exposed-weave, carbon-fiber X-brace over the engine provides torsional stiffness for improved handling. Plasan molds the brace using Toray resin. Other trim components are available in exposed carbon fiber.

Gary Lownsdale, chief technology officer at Plasan Carbon Composites, will talk about the Viper and its carbon-fiber panels at Plastics News’ Plastics in Lightweight Vehicles 2012 conference Nov. 6-7 in Livonia, Mich. (www.plasticsnews.com/plv2012).


Comments

Viper team wins engineering award

By Rhoda Miel
News Editor

Published: October 31, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Spain's Cristian Lay Group buys two materials units of bankrupt LSB

April 17, 2014 11:11 am ET

Spanish industrial conglomerate Cristian Lay Group has purchased two of the bankrupt Spanish PET packaging group La Seda de Barcelona.    More

Huntingdon Fiberglass launching second line

April 16, 2014 2:18 pm ET

Huntingdon Fiberglass Products LLC is getting set to start up a second production line later this year and hire 15-20 new employees as it sees demand ...    More

Indorama's purchase of Sasa to give wider access to multiple markets

April 16, 2014 10:07 am ET

PET maker Indorama Ventures Public Co. Ltd. is expanding in Turkey with the acquisition of a majority of Sasa Polyester Sanayi.    More

Axiall resumes operations at damaged Lake Charles PVC feedstock plant

April 15, 2014 4:41 pm ET

Axiall Corp. has resumed operations at its PVC feedstock plant that was damaged by a fire in December.
More

Image

Power failure shuts down two PE resin units in Texas

April 15, 2014 3:35 pm ET

Two polyethylene resin units operated by Chevron Phillips Chemical Co. LP in Baytown, Texas, were closed from April 8-11 because of a power failure.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events