Viper team wins engineering award

By Rhoda Miel
News Editor

Published: October 31, 2012 6:00 am ET

The Viper's satellite system is housed in a sleek-looking extension of the car's roof line. (Chrysler Group LLC/Society of Plastics Engineers photo)

Related to this story

Topics Automotive, Materials, Design

LIVONIA, MICH. (Oct. 31, 4:40 p.m. ET) — Part of the SRT Dodge Viper’s roof line dips down into the rear window glass.

It might look like a quirk of design to set the sports car apart from its competitors. Instead, it’s one small example of how an engineering team from Auburn Hills, Mich.-based Chrysler Group LLC and a handful of suppliers worked together to create a new way to integrate electronics into the car — and also shows why the car won the Vehicle Engineering Team Award from the Society of Plastics Engineers.

The award was one of two announced Oct. 29 in advance of the SPE Automotive Division’s annual Automotive Innovation Awards Gala set for Nov. 7 in Livonia, Mich.

In addition to the VETA team award, SPE selected the 1974 Oldsmobile Toronado and its industry-first driver and passenger airbags as the Hall of Fame winner, which honors an auto plastics product that has been in production for at least 15 years.

Although General Motors Corp. had tested airbags at least a year earlier, the Toronado was the first vehicle available to the public with optional airbags, then called the “air-cushion restraint system.”

Detroit-based GM expanded the optional air bags to some Buick, Oldsmobile and Cadillac sedans later in 1974.

Overall, the Viper provided a breakthrough for increased use of carbon fiber and other composites and thermoplastics as it reduced its overall weight by 100 pounds for the 2013 model year, compared with the previous 2010 Viper, SPE officials noted in an Oct. 29 press release.

The carbon-fiber body panels have received the most attention so far. They are made by Plasan Carbon Composites in Bennington, Vt., and along with reaction injection molded fender systems, composites make up more than 50 percent of the exterior skin. Carbon fiber is used in the hood, roof and lift gate.

In addition to Plasan, other suppliers of materials for the body panels are Toray Carbon Fibers Inc. of Decatur, Ala.; Umeco plc, part of Cytec Industries Inc. of Woodland Park, N.J.; Dow Chemical Co. of Midland, Mich.; and Ashland Inc. of Dublin, Ohio.

The thermoplastic dip into the glass on the lift gate was developed by the engineering teams at Chrysler and suppliers Plasan, Dow, Ashland, A.P. Plasman Corp. of Windsor, Ontario, and Legna Inc. of Warren, Mich., as a new way to position the antenna required for satellite navigation and radio systems.

Since satellite systems became standard options, carmakers have had to find ways to place them on the vehicle exterior without affecting the overall design. That effort has led to black boxes on the roof, antennas disguised in trim to mimic an aerodynamic fin or color-coordinated bumps just above the rear window.

Viper engineers wanted to avoid those familiar tricks and coordinated with its suppliers on the thin “widow’s peak” design on the lift gate. It is housed in an injection molded polycarbonate/ ABS and bonded to a carbon-fiber inner panel.

Other plastic features found on the Viper include:

* An SMC windshield frame using glass and carbon-fiber reinforcement supplied by Quantum Composites Inc. of Bay City, Mich.

* Thermoplastic bumper beams made of a PC/polybutylene tereph­thalate supplied by Sabic Innovative Plastics of Pittsfield, Mass., and molded by NetShape International LLC of Grand Haven, Mich. The bumpers also have a fascia supplied by Romeo RIM Inc. of Romeo, Mich. Romeo RIM also makes the reinforced reaction injection molded polyurethane rear quarter panels and rear appliqué using PU supplied by Pittsburgh-based Bayer MaterialScience LLC.

* A composite trunk pan and rear-end system made by Magna International Inc. of Aurora, Ontario, using an SMC blend from Ashland. The system comprises two composite parts, replacing 15 metal ones on a previous design.

* Novation SpA of Montebelluna, Italy, used a resin transfer molded vinyl ester resin supplied by Novia with a glass-, carbon- and aramid-fiber reinforcement for a seat structure that replaces the previous metal structure, saving 3 pounds per seat. Sabelt SpA is an assembly supplier for the project.

* A thin film transistor overlay is used to create a unique multilayered display for the instrument cluster. Magnetti Marelli SpA of Corbetta, Italy, is the supplier.

* Milan, Italy-based Sogefi SpA injection molds a glass-reinforced polyamide 6 resin from BASF Corp. of Florham Park, N.J., on the Viper’s first composite air-intake manifold, replacing an aluminum manifold.

* An optional exposed-weave, carbon-fiber X-brace over the engine provides torsional stiffness for improved handling. Plasan molds the brace using Toray resin. Other trim components are available in exposed carbon fiber.

Gary Lownsdale, chief technology officer at Plasan Carbon Composites, will talk about the Viper and its carbon-fiber panels at Plastics News’ Plastics in Lightweight Vehicles 2012 conference Nov. 6-7 in Livonia, Mich. (www.plasticsnews.com/plv2012).


Comments

Viper team wins engineering award

By Rhoda Miel
News Editor

Published: October 31, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Citadel opens second compounding facility in China, near Shanghai

January 27, 2015 3:22 pm ET

Citadel Plastics Inc., the American manufacturer of thermoplastic and engineered composite compounds, has opened its second facility in China,...    More

Image

Sales, profit fall at DuPont

January 27, 2015 3:13 pm ET

Materials giant DuPont Co. will use almost all of the proceeds from an upcoming spinoff — one that includes its fluoropolymer and titanium...    More

Image

A. Schulman, Citadel continue buying blitz

January 27, 2015 11:32 am ET

A. Schulman Inc. and Citadel Plastics Inc. — two deal-happy materials firms — were at it again in the second half of 2014.    More

Image

It's becoming a seller's market for plastics firms

January 27, 2015 11:37 am ET

The pace of plastics mergers and acquisitions activity slowed a bit in the second half of 2014 — but market watchers have high expectations for ...    More

Image

Materials market sees more deals

January 27, 2015 11:26 am ET

Plastics materials deals showed modest growth in 2014, increasing 6 percent vs. their 2013 total.    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events