North America PE market ready to ride a wave of shale gas

By Frank Esposito
Senior Staff Reporter

Published: November 6, 2012 6:00 am ET

Related to this story

Topics Materials, Suppliers

CHICAGO (Nov. 6, 1:25 p.m. ET) — North American polyethylene makers are getting ready to ride a wave of shale gas.

Natural gas from shale rock formations is making the U.S. and Canada among the lowest-cost producers of ethylene feedstock in the world - and that status could lead to almost 15 billion pounds of new cost-advantaged PE capacity being added in the region between 2012 and 2017, according to market veteran Nick Vafiadis.

Vafiadis is global director of plastics for the IHS Chemical consulting firm in Houston. He analyzed the PE market at a Plastics Processors Conference hosted by his firm, Oct. 24-25 in Chicago.

“In the short-term global PE demand may be slowing as China demand weakens and Europe contracts,” Vafiadis said. “Long-term, the low-cost regions will be North America and the Middle East, which are set to compete for global demand growth. The market has never had two cost-advantaged regions before.”

New PE capacity will be fed by massive planned expansions for ethylene feedstock. More than 200 million pounds of new ethylene capacity will come online this year, with more than 2.5 billion pounds scheduled for 2013 and almost 3.9 billion pounds set for 2014. In spite of the new capacity, Vafiadis said that U.S. ethylene operating rates will be above 95 percent in 2013, which will give producers some leverage in pricing.

“Every one of these new ethylene projects seems to have a strong payback,” he said. “On paper, they’re viable, and we think most of them will occur.”

Global PE demand growth is set to average 4.7 percent from 2012-17, according to IHS. Growth for the material in Northeast Asia will average 6.2 percent, with North America a bit lower at 2.7 percent, not much above Europe at 2.4 percent.

During that 2012-17 period, global low density PE demand should grow 2.3 percent, with global LDPE capacity increasing almost 18 percent. Demand for high density PE should average five percent growth, with capacity climbing more than 27 percent. Linear low density PE will be stronger still, with annual growth of 5.4 percent and a capacity increase of more than 34 percent.

By comparison, global GDP growth is expected to average 3.6 percent in that five-year period, according to IHS. Among major PE end uses, demand from film/sheet and injection molding is expected to average five percent growth in that time frame.

In the U.S., PE demand growth should average 2.5 percent from 2012-17, slightly less than the IHS expectation of 2.9 percent GDP growth in that period. That’s still an improvement from the 2007-12 period, when U.S. PE demand actually averaged a demand loss of more than one percent per year.

Most of the new PE planned for North America will be targeted into the export market, Vafiadis said. “There’s no way [producers] can move this much into the domestic market,” he added.

Another U.S. market change, according to Vafiadis, could be the erosion of a domestic premium in pricing in favor of a global price.

In 2012 and 2013, regional PE supplies should be “relatively tight,” he added, with low producer inventory levels helping to drive prices. But beyond that point, Vafiaidis said that he sees PE’s supply/demand balance improving, making it more difficult for producers to raise prices.


Comments

North America PE market ready to ride a wave of shale gas

By Frank Esposito
Senior Staff Reporter

Published: November 6, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Oxford Polymers adds compounding capacity

January 30, 2015 1:16 pm ET

Materials maker Oxford Polymers has increased its compounding capacity by installing a new single-screw extrusion line.    More

Image

Marval's next generation expands capacity

January 30, 2015 1:27 pm ET

MAMARONECK, N.Y. — There’s a lot of history at Marval Industries Inc., but the 59-year-old compounding firm also is looking toward the...    More

Image

Yizumi's stock price shoots up

January 30, 2015 11:56 am ET

Chinese injection press maker Guangdong Yizumi Precision Machinery Co. Ltd. has seen its stock price more than double in the first five trading days...    More

Image

Lubrizol buys Brazil-based coatings technology manufacturer

January 30, 2015 11:50 am ET

Specialty chemicals company Lubrizol Corp. of Wickliffe, Ohio, said it has acquired a Brazilian company that makes coatings technology for products...    More

Image

China to lead the way on robots

January 30, 2015 11:12 am ET

More industrial robots will be operating in China’s production plants than in the European Union or North America by 2017.    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events