MedPlast rebrands non-medical business as UPG

Mike Verespej

Published: November 6, 2012 6:00 am ET

Related to this story

Topics Medical, Injection Molding

TEMPE, ARIZ. (Nov. 6, 1:15 p.m. ET) — Medical molder and contract manufacturer MedPlast Inc. is rebranding all its non-medical business under the UPG name that it acquired in April where it bought UPG International Inc.

The realignment, announced Nov. 6, means UPG will operate as the industrial business company of MedPlast with five plants: two in Suzhou, China; one in Wales; one in Minneapolis; and a new 36,000 square foot plant in Houston that replaces a UPG plant five miles away.

Unlike the previous plant in Houston, which made medical and industrial products, the new plant — which opened last week — will manufacture only non-medical products. It will have 15 molding presses, automated assembly operations, pad printing, sonic welding and custom fixture manufacturing.

The five dedicated UPG plants will make precision plastic products and produce value-added services for four main markets: consumer, automotive, energy and datacenter products for the electronics and telecommunications industries.

MedPlast will have 10 plants that will concentrate on the medical and healthcare markets: the five plants it had prior to the acquisition in Tempe, Ariz.; Elkhorn, Wis.; Monticello, Iowa; West Berlin, N.J. and Westfield, Pa.; plus two former UPG facilities in Suzhou, China and additional former UPG plants in Tijuana, Mexico; Fremont, Calif., and Chicopee, Mass.

Both companies will be headquartered in Tempe, Ariz.

Based on data on the company website, MedPlast will have 332 presses ranging in size up to 1,000 tons of clamping force and 579,000 square feet of manufacturing plant space—with 379,000 of that in the United States, 62,000 in Mexico and 138,000 square feet in China.

Its medical footprint also includes 10 Class 100,000 clean rooms—five in the U.S., one in Mexico and four in China. It also has a Class 10,000 clean room in the United States.

UPG will have three white rooms, 89 presses ranging in size up to 1,000 tons of clamping force and roughly 170,000 square feet of manufacturing space—split nearly equally between the U.S., and its three overseas locations,

At the time of the merger, the company’s estimated combined sales were $250 million, with 60 percent of that from medical, which suggests that MedPlast has roughly $150 million in sales going forward and UPG $100 million.

MedPlast had acquired UPG to gain a foothold in the China market, where UPG had four plants.

Separating the medical business from its other businesses is “an approach that allows customers to capitalize on our unique industry synergies and solutions that deliver superior return on investment,” said CEO Harold Faig in a statement released by the company. “Each brand retains its focus, delivers industry-leading solutions to its individual customer base, and allows for growth from new business and organically,”

He said the new structural orientation, for example, has dramatically increased plant utilization at UPG and heightened the ability of UPG to win major on-shoring assignments.

MedPlast’s expertise includes injection molding, liquid injection molding, two-shot molding, over molding, insert molding, multi-component molding, extrusion, blow molding, injection blow molding, injection stretch blow molding, silicone extrusion, compression and transfer molding, and precision mold making.

It additionally has the ability to process elastomeric and silicone materials, and provide medical customers value-added services such as partial- and full-assembly, contract sterilization, lab services, and global supply chain and logistics management.

MedPlast was formed in April 2008 when Baird Capitol Partners purchased family-owned K&W Medical Specialties of Westfield, Pa and the engineered rubber and plastics group of Applied Tech Products Corp. and hired Faig to lead what was at the time a $90 million medical manufacturer.


Comments

MedPlast rebrands non-medical business as UPG

Mike Verespej

Published: November 6, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Cascade Engineering founder Keller to step down as CEO

September 16, 2014 8:33 pm ET

Cascade Engineering Inc. is undergoing a transition as President Mark Miller will also add the role of CEO, replacing founder Fred Keller, who has...    More

Image

Canadian, Mexican injection molders form auto supply joint venture

September 16, 2014 2:26 pm ET

A new automotive parts manufacturer will open in Querétaro, Mexico, through a joint venture between Canadian automotive supplier Papp Plastics and...    More

Image

DS Smith adds to footprint with Croatian injection molding acquisition

September 10, 2014 2:05 pm ET

DS Smith plc, the London-headquartered packaging giant, has announced the acquisition of Kaplast dd, a Croatian injection molding company.    More

Image

California mold maker adds new press

September 9, 2014 1:54 pm ET

M.R. Mold & Engineering Corp. of Brea, Calif., has upgraded its injection molding capability to enhance testing and sampling of customer molds prior...    More

Image

Chicago molder certified as woman-owned company

September 9, 2014 1:41 pm ET

The Women's Business Enterprise National Council (WBENC) has certified Magenta LLC as a woman-owned business.    More

Market Reports

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook – North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events