MedPlast rebrands non-medical business as UPG

Mike Verespej

Published: November 6, 2012 6:00 am ET

Related to this story

Topics Medical, Injection Molding

TEMPE, ARIZ. (Nov. 6, 1:15 p.m. ET) — Medical molder and contract manufacturer MedPlast Inc. is rebranding all its non-medical business under the UPG name that it acquired in April where it bought UPG International Inc.

The realignment, announced Nov. 6, means UPG will operate as the industrial business company of MedPlast with five plants: two in Suzhou, China; one in Wales; one in Minneapolis; and a new 36,000 square foot plant in Houston that replaces a UPG plant five miles away.

Unlike the previous plant in Houston, which made medical and industrial products, the new plant — which opened last week — will manufacture only non-medical products. It will have 15 molding presses, automated assembly operations, pad printing, sonic welding and custom fixture manufacturing.

The five dedicated UPG plants will make precision plastic products and produce value-added services for four main markets: consumer, automotive, energy and datacenter products for the electronics and telecommunications industries.

MedPlast will have 10 plants that will concentrate on the medical and healthcare markets: the five plants it had prior to the acquisition in Tempe, Ariz.; Elkhorn, Wis.; Monticello, Iowa; West Berlin, N.J. and Westfield, Pa.; plus two former UPG facilities in Suzhou, China and additional former UPG plants in Tijuana, Mexico; Fremont, Calif., and Chicopee, Mass.

Both companies will be headquartered in Tempe, Ariz.

Based on data on the company website, MedPlast will have 332 presses ranging in size up to 1,000 tons of clamping force and 579,000 square feet of manufacturing plant space—with 379,000 of that in the United States, 62,000 in Mexico and 138,000 square feet in China.

Its medical footprint also includes 10 Class 100,000 clean rooms—five in the U.S., one in Mexico and four in China. It also has a Class 10,000 clean room in the United States.

UPG will have three white rooms, 89 presses ranging in size up to 1,000 tons of clamping force and roughly 170,000 square feet of manufacturing space—split nearly equally between the U.S., and its three overseas locations,

At the time of the merger, the company’s estimated combined sales were $250 million, with 60 percent of that from medical, which suggests that MedPlast has roughly $150 million in sales going forward and UPG $100 million.

MedPlast had acquired UPG to gain a foothold in the China market, where UPG had four plants.

Separating the medical business from its other businesses is “an approach that allows customers to capitalize on our unique industry synergies and solutions that deliver superior return on investment,” said CEO Harold Faig in a statement released by the company. “Each brand retains its focus, delivers industry-leading solutions to its individual customer base, and allows for growth from new business and organically,”

He said the new structural orientation, for example, has dramatically increased plant utilization at UPG and heightened the ability of UPG to win major on-shoring assignments.

MedPlast’s expertise includes injection molding, liquid injection molding, two-shot molding, over molding, insert molding, multi-component molding, extrusion, blow molding, injection blow molding, injection stretch blow molding, silicone extrusion, compression and transfer molding, and precision mold making.

It additionally has the ability to process elastomeric and silicone materials, and provide medical customers value-added services such as partial- and full-assembly, contract sterilization, lab services, and global supply chain and logistics management.

MedPlast was formed in April 2008 when Baird Capitol Partners purchased family-owned K&W Medical Specialties of Westfield, Pa and the engineered rubber and plastics group of Applied Tech Products Corp. and hired Faig to lead what was at the time a $90 million medical manufacturer.


Comments

MedPlast rebrands non-medical business as UPG

Mike Verespej

Published: November 6, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Some medical devices could get faster approval with new FDA rules

April 22, 2014 7:41 pm ET

The U.S. Food and Drug Administration is proposing an expedited approval for medical devices for devices aimed at the diagnosis or treatment of...    More

Image

Two Ohio groups team up to accelerate development of future medical devices

April 22, 2014 9:55 am ET

The Austen BioInnovation Institute in Akron and Cleveland-based design specialists Nottingham Spirk announced a strategic partnership that the two...    More

Image

German electronics firm expanding in Hungary

April 22, 2014 9:46 am ET

German electronics manufacturer Provertha GmbH has announced plans to set up a new plastic galvanizing plant at the Kapuvár Industrial Park, in...    More

Image

Cambro investing $30.4 million in new N.C. injection molding plant

April 18, 2014 2:36 pm ET

Foodservice products manufacturer Cambro Manufacturing Co. Inc. plans to set up a satellite production and distribution operation in Mebane, N.C., to ...    More

Image

Increased orders prompt Georg Utz to add capacity, equipment in Indiana

April 18, 2014 12:20 pm ET

Plastic totes and tray orders have picked up to the point where manufacturer Georg Utz Inc. has added machines, silos and material feed systems to its...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook – North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 – The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events