MedPlast rebrands non-medical business as UPG

Mike Verespej

Published: November 6, 2012 6:00 am ET

Related to this story

Topics Medical, Injection Molding

TEMPE, ARIZ. (Nov. 6, 1:15 p.m. ET) — Medical molder and contract manufacturer MedPlast Inc. is rebranding all its non-medical business under the UPG name that it acquired in April where it bought UPG International Inc.

The realignment, announced Nov. 6, means UPG will operate as the industrial business company of MedPlast with five plants: two in Suzhou, China; one in Wales; one in Minneapolis; and a new 36,000 square foot plant in Houston that replaces a UPG plant five miles away.

Unlike the previous plant in Houston, which made medical and industrial products, the new plant — which opened last week — will manufacture only non-medical products. It will have 15 molding presses, automated assembly operations, pad printing, sonic welding and custom fixture manufacturing.

The five dedicated UPG plants will make precision plastic products and produce value-added services for four main markets: consumer, automotive, energy and datacenter products for the electronics and telecommunications industries.

MedPlast will have 10 plants that will concentrate on the medical and healthcare markets: the five plants it had prior to the acquisition in Tempe, Ariz.; Elkhorn, Wis.; Monticello, Iowa; West Berlin, N.J. and Westfield, Pa.; plus two former UPG facilities in Suzhou, China and additional former UPG plants in Tijuana, Mexico; Fremont, Calif., and Chicopee, Mass.

Both companies will be headquartered in Tempe, Ariz.

Based on data on the company website, MedPlast will have 332 presses ranging in size up to 1,000 tons of clamping force and 579,000 square feet of manufacturing plant space—with 379,000 of that in the United States, 62,000 in Mexico and 138,000 square feet in China.

Its medical footprint also includes 10 Class 100,000 clean rooms—five in the U.S., one in Mexico and four in China. It also has a Class 10,000 clean room in the United States.

UPG will have three white rooms, 89 presses ranging in size up to 1,000 tons of clamping force and roughly 170,000 square feet of manufacturing space—split nearly equally between the U.S., and its three overseas locations,

At the time of the merger, the company’s estimated combined sales were $250 million, with 60 percent of that from medical, which suggests that MedPlast has roughly $150 million in sales going forward and UPG $100 million.

MedPlast had acquired UPG to gain a foothold in the China market, where UPG had four plants.

Separating the medical business from its other businesses is “an approach that allows customers to capitalize on our unique industry synergies and solutions that deliver superior return on investment,” said CEO Harold Faig in a statement released by the company. “Each brand retains its focus, delivers industry-leading solutions to its individual customer base, and allows for growth from new business and organically,”

He said the new structural orientation, for example, has dramatically increased plant utilization at UPG and heightened the ability of UPG to win major on-shoring assignments.

MedPlast’s expertise includes injection molding, liquid injection molding, two-shot molding, over molding, insert molding, multi-component molding, extrusion, blow molding, injection blow molding, injection stretch blow molding, silicone extrusion, compression and transfer molding, and precision mold making.

It additionally has the ability to process elastomeric and silicone materials, and provide medical customers value-added services such as partial- and full-assembly, contract sterilization, lab services, and global supply chain and logistics management.

MedPlast was formed in April 2008 when Baird Capitol Partners purchased family-owned K&W Medical Specialties of Westfield, Pa and the engineered rubber and plastics group of Applied Tech Products Corp. and hired Faig to lead what was at the time a $90 million medical manufacturer.


Comments

MedPlast rebrands non-medical business as UPG

Mike Verespej

Published: November 6, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Medical manufacturer adds clean room, machinery

August 1, 2014 8:39 am ET

Medical component maker UFP Technologies Inc. expanded its Georgetown, Mass., operation with the addition of a clean room and high volume equipment.    More

Spain's ITC Packaging acquires Coveris rigids plant

July 31, 2014 9:59 am ET

International packaging group Coveris Holdings has sold its Spanish business Coveris Rigid Spain, including an injection molding plant, to the...    More

Image

Tessy investing $10 million in new plant, infrastructure

July 30, 2014 4:57 pm ET

Tessy Plastics Corp. continues to buy factory buildings in upstate New York — acquiring a 112,000-square-foot former Honeywell building in...    More

Image

One51 adding injection molder Straight to its bin molding portfolio

July 29, 2014 10:12 am ET

Dublin-based One51 plc has had its purchase of British trash bin maker Straight plc cleared by the United Kingdom's Competition and Markets Authority.    More

Image

Two medical device makers add specialty products through acquisitions

July 28, 2014 3:02 pm ET

The medical merger mania continues this summer as two more medical device manufacturers are swallowed up by bigger competitors.    More

Market Reports

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events