Coke sustainability report emphasizes plant-based packaging

Kerri Jansen

Published: November 7, 2012 6:00 am ET

Related to this story

Topics Materials, Suppliers, Sustainability, Packaging

ATLANTA (Nov. 7, 12:45 p.m. ET) — Coca-Cola Co. issued its 2011-12 Global Sustainability Report Nov. 7, declaring progress in plant-based packaging and water stewardship programs.

The Atlanta-based beverage giant has so far distributed internationally more than 10 billion fully recyclable packages made with plant-based materials. The company reported that 5 percent of its packaging material comes from recycled or renewable materials and has set a goal to source 25 percent of its PET from recycled or renewable material by 2015.

About 37 percent of bottles and cans sold by Coca-Cola are recovered, the company estimated in the report. The company’s goal is 50 percent recovery by 2015.

Since 2004, Coca-Cola has improved its water use ratio (liters of water used per liter of product produced) by 20 percent. The report also touted progress in efforts to support healthy watersheds and sustainable community water programs.

The company reported 2011 global manufacturing carbon emissions were 3 percent higher than in 2010, but down 4 percent at manufacturing operations in developed countries.

Coca-Cola reported total greenhouse gas emissions of 5.32 million metric tons (MMt) carbon dioxide equivalent in 2011, compared to 5.19 MMt in 2010. In 2009, the company emitted 5.33 MMt, according to the report.

“We recognize that the sustainability of our business depends on the health of the communities we serve. We also know that we won’t reach our 2020 Vision of doubling the business without embedding sustainability into our business to drive efficiency and effectiveness,” Bea Perez, Coca-Cola’s chief sustainability officer, said in a company news release.


Comments

Coke sustainability report emphasizes plant-based packaging

Kerri Jansen

Published: November 7, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Non-recyclable items gumming up the works at recycling centers

August 21, 2014 3:46 pm ET

The influx of all sorts of unacceptable items at recycling centers has gotten to the point that Charlotte, N.C.-based ReCommunity is trying to bring...    More

Image

Investment firm specializes in emerging polymer firms in Ohio

August 21, 2014 3:20 pm ET

A plastics market veteran is working with an investment firm and a research foundation to help commercialize polymer technology in the Buckeye State.    More

Image

Bayer, SCAC partner on water reuse project

August 21, 2014 12:48 pm ET

Bayer MaterialScience (BMS) and Shanghai Chlor-Alkali Chemical Co. Ltd. (SCAC) have entered into a preliminary agreement for the reuse of waste water ...    More

Image

Report predicts growth for flexible packaging

August 21, 2014 12:34 pm ET

Flexible packaging in the United States grew last year and is expected to continue to grow this year, according to a new report by the Flexible...    More

Image

Milacron commits $30 million to investment in India

August 20, 2014 5:42 pm ET

MUMBAI (Updated) — Cincinnati-based Milacron LLC plans to invest $30 million over the next three years in India. The investments will double cap...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events