Plastikos expands clean-room molding

Mike Verespej

Published: November 7, 2012 6:00 am ET

Related to this story

Topics Medical, Injection Molding

ERIE, PA. (Nov. 7, 4:15 p.m. ET) — To increase its capabilities for medical device manufacturing, custom injection molder Plastikos Inc. is in the process of adding a third press for its Class 10,000 clean room at its headquarters plant in Erie.

“There is no firm date by when that will be completed, but we are working to integrate that press now,” said president and general manager Philip Katen in a Nov. 7 phone interview.

He said the new 88-ton Arburg Allrounder press will be the second press of that size for the clean room, which also has a 66-ton press.

“We are adding it to expand our footprint in medical device manufacturing,” Katen said. “It is part of our evolution to increase the value we bring to our customers.”

In just a short period of time, he said, medical device manufacturing has become a significant contributor to the revenues of the company which was the Plastics News’ Processor of the Year in 2010.

“A few years ago, we had very little revenues from medical—maybe 5 percent—and no clean room,” Katen said.

When the clean room—completed in early 2011—was under construction in mid-2010, medical was 10 percent of the company’s revenues. “Today it accounts for 15 percent of our revenues and is approaching 20 percent,” Katen said.

PN’s rankings of injection molders this year listed $16.8 million in sales for the company’s fiscal year that ended Oct. 31, 2011.

“In the next two to three years we see medical approaching or exceeding 25 percent” of the company’s revenues, Katen said. “Three-to-five years from now we’d like it to be at least one-third of our revenues and hopefully we will get it to be 50 percent of our revenues and maybe beyond” after that.

The new press “will increase our capacity significantly and give us the ability to deliver products to customers on shorter lead times,” Katen said. “It will enable us to provide customers with quicker turnarounds.”

The Plastikos president believes the company’s Class 7 clean room gives it an advantage in competing for medical applications that require an extra-clean manufacturing environment.

“Our ISO level Class 7 clean room is one-quarter of a magnitude cleaner that the ISO-level 8 clean room most medical manufacturers have,” he said. “It gives the ability to produce product and inspect product in an even cleaner environment for applications that require an even cleaner [manufacturing] environment.”

He declined to specify any specific product or market segments that the company was targeting. But he said the company currently supplies dental care components, products for eye care, diabetes care, fluid delivery systems — both liquid and air, and surgical applications where precision is required.

“Precision manufacturing and high-end, highly engineered parts with tight tolerances fit our expertise,” he said.

Down the road, an expansion of the clean room or an additional facility for medical manufacturing is a possibility, he said.

“When we would do an expansion would be difficult to specify,” he said. “We have additional capacity at our existing manufacturing facility” because of continuing investments to make operations there “more efficient”—which increases the capability in that plant.

But “depending on how quickly we approach those targets” for medical sales, Katen said, “an expansion into a second facility could be required.”


Comments

Plastikos expands clean-room molding

Mike Verespej

Published: November 7, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Medical manufacturer adds clean room, machinery

August 1, 2014 8:39 am ET

Medical component maker UFP Technologies Inc. expanded its Georgetown, Mass., operation with the addition of a clean room and high volume equipment.    More

Spain's ITC Packaging acquires Coveris rigids plant

July 31, 2014 9:59 am ET

International packaging group Coveris Holdings has sold its Spanish business Coveris Rigid Spain, including an injection molding plant, to the...    More

Image

Tessy investing $10 million in new plant, infrastructure

July 30, 2014 4:57 pm ET

Tessy Plastics Corp. continues to buy factory buildings in upstate New York — acquiring a 112,000-square-foot former Honeywell building in...    More

Image

One51 adding injection molder Straight to its bin molding portfolio

July 29, 2014 10:12 am ET

Dublin-based One51 plc has had its purchase of British trash bin maker Straight plc cleared by the United Kingdom's Competition and Markets Authority.    More

Image

Two medical device makers add specialty products through acquisitions

July 28, 2014 3:02 pm ET

The medical merger mania continues this summer as two more medical device manufacturers are swallowed up by bigger competitors.    More

Market Reports

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events