Plastikos expands clean-room molding

Mike Verespej

Published: November 7, 2012 6:00 am ET

Related to this story

Topics Medical, Injection Molding

ERIE, PA. (Nov. 7, 4:15 p.m. ET) — To increase its capabilities for medical device manufacturing, custom injection molder Plastikos Inc. is in the process of adding a third press for its Class 10,000 clean room at its headquarters plant in Erie.

“There is no firm date by when that will be completed, but we are working to integrate that press now,” said president and general manager Philip Katen in a Nov. 7 phone interview.

He said the new 88-ton Arburg Allrounder press will be the second press of that size for the clean room, which also has a 66-ton press.

“We are adding it to expand our footprint in medical device manufacturing,” Katen said. “It is part of our evolution to increase the value we bring to our customers.”

In just a short period of time, he said, medical device manufacturing has become a significant contributor to the revenues of the company which was the Plastics News’ Processor of the Year in 2010.

“A few years ago, we had very little revenues from medical—maybe 5 percent—and no clean room,” Katen said.

When the clean room—completed in early 2011—was under construction in mid-2010, medical was 10 percent of the company’s revenues. “Today it accounts for 15 percent of our revenues and is approaching 20 percent,” Katen said.

PN’s rankings of injection molders this year listed $16.8 million in sales for the company’s fiscal year that ended Oct. 31, 2011.

“In the next two to three years we see medical approaching or exceeding 25 percent” of the company’s revenues, Katen said. “Three-to-five years from now we’d like it to be at least one-third of our revenues and hopefully we will get it to be 50 percent of our revenues and maybe beyond” after that.

The new press “will increase our capacity significantly and give us the ability to deliver products to customers on shorter lead times,” Katen said. “It will enable us to provide customers with quicker turnarounds.”

The Plastikos president believes the company’s Class 7 clean room gives it an advantage in competing for medical applications that require an extra-clean manufacturing environment.

“Our ISO level Class 7 clean room is one-quarter of a magnitude cleaner that the ISO-level 8 clean room most medical manufacturers have,” he said. “It gives the ability to produce product and inspect product in an even cleaner environment for applications that require an even cleaner [manufacturing] environment.”

He declined to specify any specific product or market segments that the company was targeting. But he said the company currently supplies dental care components, products for eye care, diabetes care, fluid delivery systems — both liquid and air, and surgical applications where precision is required.

“Precision manufacturing and high-end, highly engineered parts with tight tolerances fit our expertise,” he said.

Down the road, an expansion of the clean room or an additional facility for medical manufacturing is a possibility, he said.

“When we would do an expansion would be difficult to specify,” he said. “We have additional capacity at our existing manufacturing facility” because of continuing investments to make operations there “more efficient”—which increases the capability in that plant.

But “depending on how quickly we approach those targets” for medical sales, Katen said, “an expansion into a second facility could be required.”


Comments

Plastikos expands clean-room molding

Mike Verespej

Published: November 7, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Globalization brings sizable growth, primarily in Asia

November 25, 2014 1:40 pm ET

In 1990, the year after Plastics News published our first issue, there were 33,000 injection molding machines sold worldwide. Fast forward to 2013,...    More

Image

Uni Cap to build cap molding plant in Jordan

November 25, 2014 12:57 pm ET

The Persian Gulf's largest molder of caps and closures is investing $10 million in a new factory near Amman, Jordan, as part of an effort to boost...    More

Image

Deal adds U.K. plant to DelStar

November 25, 2014 12:47 pm ET

Schweitzer-Mauduit International Inc. (SWM) is acquiring certain assets from the advanced wound management division of London-based Smith & Nephew...    More

Image

Canada's Papp Plastics is eyeing big opportunities with JV in Mexico

November 24, 2014 4:11 pm ET

Canadian injection molder and turnkey solution provider Papp Plastics & Distributing Ltd. will open an $11 million to $12 million joint venture...    More

Image

AMA Plastics adds presses, changes management structure

November 24, 2014 3:57 pm ET

AMA Plastics Inc. has strengthened its management structure, received recognition for entrepreneurship, achieved quality improvements and added three ...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events