Plastikos expands clean-room molding

Mike Verespej

Published: November 7, 2012 6:00 am ET

Related to this story

Topics Medical, Injection Molding

ERIE, PA. (Nov. 7, 4:15 p.m. ET) — To increase its capabilities for medical device manufacturing, custom injection molder Plastikos Inc. is in the process of adding a third press for its Class 10,000 clean room at its headquarters plant in Erie.

“There is no firm date by when that will be completed, but we are working to integrate that press now,” said president and general manager Philip Katen in a Nov. 7 phone interview.

He said the new 88-ton Arburg Allrounder press will be the second press of that size for the clean room, which also has a 66-ton press.

“We are adding it to expand our footprint in medical device manufacturing,” Katen said. “It is part of our evolution to increase the value we bring to our customers.”

In just a short period of time, he said, medical device manufacturing has become a significant contributor to the revenues of the company which was the Plastics News’ Processor of the Year in 2010.

“A few years ago, we had very little revenues from medical—maybe 5 percent—and no clean room,” Katen said.

When the clean room—completed in early 2011—was under construction in mid-2010, medical was 10 percent of the company’s revenues. “Today it accounts for 15 percent of our revenues and is approaching 20 percent,” Katen said.

PN’s rankings of injection molders this year listed $16.8 million in sales for the company’s fiscal year that ended Oct. 31, 2011.

“In the next two to three years we see medical approaching or exceeding 25 percent” of the company’s revenues, Katen said. “Three-to-five years from now we’d like it to be at least one-third of our revenues and hopefully we will get it to be 50 percent of our revenues and maybe beyond” after that.

The new press “will increase our capacity significantly and give us the ability to deliver products to customers on shorter lead times,” Katen said. “It will enable us to provide customers with quicker turnarounds.”

The Plastikos president believes the company’s Class 7 clean room gives it an advantage in competing for medical applications that require an extra-clean manufacturing environment.

“Our ISO level Class 7 clean room is one-quarter of a magnitude cleaner that the ISO-level 8 clean room most medical manufacturers have,” he said. “It gives the ability to produce product and inspect product in an even cleaner environment for applications that require an even cleaner [manufacturing] environment.”

He declined to specify any specific product or market segments that the company was targeting. But he said the company currently supplies dental care components, products for eye care, diabetes care, fluid delivery systems — both liquid and air, and surgical applications where precision is required.

“Precision manufacturing and high-end, highly engineered parts with tight tolerances fit our expertise,” he said.

Down the road, an expansion of the clean room or an additional facility for medical manufacturing is a possibility, he said.

“When we would do an expansion would be difficult to specify,” he said. “We have additional capacity at our existing manufacturing facility” because of continuing investments to make operations there “more efficient”—which increases the capability in that plant.

But “depending on how quickly we approach those targets” for medical sales, Katen said, “an expansion into a second facility could be required.”


Comments

Plastikos expands clean-room molding

Mike Verespej

Published: November 7, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

MGS buying N.Y. medical molding plant from Hospira

April 17, 2014 10:19 pm ET

MGS Manufacturing Group is purchasing the Buffalo, N.Y., injection molding facility and related product line of Hospira Inc., effective July 1. Terms ...    More

Image

German auto supplier Dr. Schneider opens second US plant

April 17, 2014 12:57 pm ET

Dr. Schneider Kunststoffwerke GmbH, a German supplier of plastic interior auto parts, has opened a $29 million manufacturing plant in Russell Springs,...    More

Image

Adding flavor to capture sales

April 16, 2014 4:03 pm ET

Water bottles increasingly are designed and molded with filters and infusers to hold fruit, vegetables or herbs to give water a different taste.    More

New Tigre, ADS JV aims to open more doors for Tigre in US

April 16, 2014 12:15 pm ET

A new joint venture between Tigre S.A. Brazil, a leading PVC pipe maker, and Advanced Drainage Systems Inc., the world's largest high-density...    More

Image

Austria's Greiner building a foothold in the US rigid packaging market

April 15, 2014 1:22 pm ET

Greiner Packaging International GmbH, one of Europe's largest makers of rigid plastic packaging, now wants to make its mark in the United States.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events