North American prices up for polypropylene and suspension PVC

By Frank Esposito
Senior Staff Reporter

Published: November 8, 2012 6:00 am ET

Related to this story

Topics Materials, Suppliers

AKRON, OHIO (Nov. 8, 3:10 p.m. ET) — Average North American selling prices for polypropylene and suspension PVC resin each bumped up 2 cents per pond in October.

The 2-cent PP move means that prices now are up a total of 3 cents per pound in September and October combined. Some buyers reported seeing only 1.5 cents in increases per month, but the two-month total settled out at 3 cents.

The increases come after prices had tumbled a total of 27 cents per pound between May and August. Combined with early-year prices increases, Regional PP prices now are down a net of 2 cents from where they started the year – a drop of about 2 percent.

The October increase resulted from tighter supplies of both PP resin and propylene monomer feedstock, as well as relatively strong PP demand growth in North America, market sources said.

Through September, U.S./Canadian PP sales were up just under 3 percent, according to the American Chemistry Council in Washington. Domestic sales growth of almost 4 percent was dampened by a 15 percent decline in export sales.

Regional PP demand “should be balanced through the rest of the year,” according to Scott Newell, a market analyst with Resin Technology Inc. in Fort Worth, Texas. “It could come down a little bit, but growth still should be positive for the year.”

Price increases of 5-7 cents per pound have been nominated for Nov. 1 for propylene monomer, and resin prices have followed monomer prices almost in lockstep for the last couple of years. But Newell said that trend could be changing, as resin markets grow tighter and operating rates approach 90 percent.

“We’re seeing producers push for [profit] margin expansion beyond the monomer price,” he said. “They’d been trying unsuccessfully for two or three years, but heading into 2013, they’re trying to change contracts that are based on monomer prices.”

“Resin supply is tightening, and that helps [PP] producers’ chances” of growing margin, Newell added.

In the short-term, North American PP supplies could be affected by the temporary closings of more than 1.5 billion pounds of combined capacity at plants operated by Braskem Americas in Marcus Hook, Pa., and by Phillips 66 Corp. in Linden, N.J. Both plants went down in advance of Hurricane Sandy, which hit the U.S. East Coast on Oct. 29, bringing with it high winds, heavy rains and flooding.

As of Nov. 8, both of those plants had regained electrical power, but neither was producing PP resin. On the Phillips 66 website, officials said that normal operations at its Bayway Refinery – which includes the PP plant – should resume in two to three weeks.

Through September, U.S./Canadian sales of PP into injection molded cups and containers were up more than 23 percent, making that category one of the region’s fastest-growing PP end markets. Sales of PP to compounders in the region were up almost 15 percent.

In PVC, producers in October were able to push through 2 cents of a 3-cent increase they were seeking for that month. The increase marks the second in as many months, following a 3-cent hike that took hold in September.

A Texas-based PVC buyer said that although demand was good in October, it’s been slowing lately. A dramatic drop in export prices and a lower-than-expected increase in ethylene feedstock also prevented the full 3-cent move from going through, he said.

The 3-cent move in September had put prices back to their Jan. 1 levels. The 2-cent October hike now puts them in positive territory by about 2 percent.

U.S./Canadian PVC sales were up almost 6 percent through September, with domestic growth of almost 7 percent slightly lessened by export growth of more than 4 percent.

The increase in domestic PVC sales is proof that the U.S. housing market is rebounding after several difficult years. Sales into the industry’s flagship rigid pipe and tubing end market jumped 10 percent through September, while sales of PVC into siding and related uses grew almost nine percent. Sales into extruded windows and doors grew at an even faster rate of almost 24 percent.

Construction-related sales made up almost 61 percent of total domestic PVC sales during that nine-month period.


Comments

North American prices up for polypropylene and suspension PVC

By Frank Esposito
Senior Staff Reporter

Published: November 8, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

New Hexcel plant will supply carbon fiber for Airbus A350 XWB

September 30, 2014 2:43 pm ET

Hexcel Corp. is investing $250 million on a new carbon fiber plant in France, with part of the production going into the future Airbus SAS A350 XWB.    More

Image

Welding equipment supplier Forward completes expansion

September 30, 2014 4:08 pm ET

Plastic welding equipment producer Forward Technology completed an expansion it predicts will help customers become more efficient and cut costs.    More

Image

Extreme Tool uses remote Michigan location to attract younger workers

September 30, 2014 3:47 pm ET

“I'm not saying there's anything wrong with being an old guy like me. But I do believe in the power of youth and reinvesting in training. The...    More

Image

LyondellBasell CEO Gallogly to retire

September 30, 2014 3:00 pm ET

James Gallogly, CEO of Houston-based polyolefins producer LyondellBasell Industries NV, on Sept. 29 announced plans to retire in 2015.    More

Image

RJG buys UK training group G&A

September 30, 2014 11:10 am ET

G&A Moulding Technology Ltd., a United Kingdom-based training and consultancy group, has been bought by RJG Inc., the U.S.-based training business.    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events