New Renault Clio has injection molded hatch

Published: November 9, 2012 6:00 am ET

Related to this story

Topics Materials, Automotive, Design

BERWYN, PA. (Nov. 9, 11:45 a.m. ET) — Styron LLC has been involved in a two-year development project leading to the launch of a thermoplastic hatch on the new Renault Clio car. The hatch is injection molded in three PP compounds developed by Styron.

The inner skin is injection molded using a talc filled PP compound. This connects to the structural part which is produced with a concentrated long glass fiber-filled PP resin (LGF-PP) developed by Styron. The concentrate is blended at the molding machine with a PP copolymer resin.

The outer skin is made with a blend of a PP impact copolymer grade, a specifically formulated 70 percent talc masterbatch and color concentrate. Styron says this method, which it calls Inspire At-Press, allows for a tailored mechanical performance to meet the specific application requirements.

“The automotive industry has been looking for alternatives to steel for lift-gates [hatches] for many years. Weight savings, styling freedom and function integration are the main objectives,” said Marjolein Groeneweg, marketing manager at Styron Automotive.

Berwyn-based Styron supported Renault in the engineering phase with process simulations to develop a thermoplastic hatch, as the company wanted the hinges and the closing mechanism to be hidden. The company also addressed issues to do with external conditions, such as exposure to high/low temperature in humid environment which can cause deformation.

Styron said LGF-PP was used to help improve impact resistance, expansion and durability of the structural part of the hatch. Using a material with higher glass content improves the stiffness and toughness of the structural part.

The company said that choosing a material composition and manufacturing process that achieves the desired glass fiber length distribution was critical to meeting the specific performance requirements of the Clio's hatch.

In addition, Styron also supported Renault in selecting the appropriate plasticizing screw to maintain the required fiber length and also in optimizing the injection mold design.


Comments

New Renault Clio has injection molded hatch

Published: November 9, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

'Thermoforming has nearly limitless possibilities'

April 18, 2014 12:54 pm ET

Julie McAlindon of PolyOne Corp. speaks about the future of thermoforming and the integration of Spartech Corp.    More

Image

Ascend targets nylon for auto applications, opening propylene monomer unit in Texas

April 18, 2014 10:57 am ET

Materials firm Ascend Performance Materials Inc. is in full operation at its new nylon 6/6 compounding line in Florida and will break ground by the...    More

Dutch company launching $100 million PP, PE recycling plant

April 18, 2014 10:42 am ET

Quality Circular Polymers is building a new plastics recycling operation in Geleen, the Netherlands' Chemelot industrial chemical site, with a...    More

Lumena suspends trading, delays report amid claims of 'misrepresenting' financials

April 18, 2014 10:19 am ET

China Lumena New Materials Corp., which says it has the world's largest manufacturing capacity for polyphenylene sulfide resin, has suspended its...    More

PolyQuest spins off FiberQuest unit

April 18, 2014 10:14 am ET

PolyQuest Inc. has spun off its FiberQuest unit — which distributes polyester staple fibers and cotton — as a separate company.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events